1 / 7
Making better Use of the NIIMBOT D110 Packaging — image 1
1 / 7

Making better Use of the NIIMBOT D110 Packaging

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Got a NIIMBOT D110 and optimized its plain box to fit the printer plus a few label rolls within original size.

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
83
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

I picked up a NIIMBOT D110 label printer, which comes in a small cardboard box—nothing fancy.

I figured I could make slightly more efficient use of the available space to fit a few rolls of labels alongside the printer, all while staying within the dimensions of the original packaging.

Remove the original packaging insert.

The original insert is just hot-glued in and can easily be removed.

The new - more space-efficient Insert

The new insert will make better use of the available space. 

Better "opening experience"

The new insert adds some internal height. Since it is not fully covered by the lid, the box is much easier to open.

Print instructions ( from Prusa’s Printable Parts page )

Download the latest PrusaSlicer and use the following settings**:

  • Print settings: 0.20mm QUALITY / STRUCTURAL

  • Filament: PLA ( tested on Prusament ) works just fine

** Note that print settings are recommended, but you can experiment with your own. 

Tags