47 models
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
A 2x3 gridfinity bin for a D110 Niimbot label maker and 3 additional rolls of labels. Original model had 3 slots for labels and it was offset in a strange way (not centered). Print at 0.2mm layer height
A link to my Gridfinity Niimbot- D110 holder
I needed a small Nimbot spool case but couldn't find anything I liked, so I created one.
Remix of the Terminal for SSD1106 1.3'' OLED to make it shorter and to remove the internal structures
link to Gridfinity Niimbot- D110 label sticker roll holder
A IKEA Skadis holder for the Niimbot D110 Label Maker that gives you access to the power button and charging port.
Fits Niimbot D110 Label Printer, Press Fit 6x2mm magnets
A simple Gridfinity 1x3 bin of 6u high for Niimbot D110 label printer ( aliexpress ). The difference between this model and others is that the chamfers make the printer fit perfectly.
This adapter works with the TP-Link Kasa KD110 doorbell on standard 4" double siding.
How to print: 0,2 layer height 100% infill (only matters for the hooks) supports: yes (I only recommend supports for the hooks) Material: I used PLA, any other material should also work well Printing time: 40min on Bambu Lab P1P…
A brilliant Spool case from Pawel Zawadzki - but only supported the 16mm spools - this version supports 32mm spools.
this RC body should be easily printed with supports. going to put accessories out for it! Have fun! PLS comment if it prints well?
Gridfinity bin for the upgraded nimbot D110
WPL dimension rims for inspired D110 Land Rover Defender 1/16 scale for MN-90 RC defender
Gridfinity-compatible and stackable holder for a Niimbot D110 Label Maker . It allows opening and refilling the label maker without taking it out of the holder. Magnet holes have been sized slightly smaller than standard (6.2mm vs 6.5mm)…
This is a Landrover defender, Its modeld after the real thing (the D110), if you have any questions about the model, do not hesitate to contact me! I used glue and paint to make it look better, but to be honest i am not a really good…
Hello! Even though I'm not very creative and still need to learn any design software, the ease of use of a Gridfinity generator (https://gridfinity.perplexinglabs.com/) allowed me to apply my Maker instincts and create this labeler…
Mount for the Niimbot D110 that gives you access to the power button, charging port and printed label without having to remove it from the mount. I originally designed it so it can be mounted flush with 1mm thick nano tape cut to size,…
This is ikea skadis holder for Niimbot D110M label printer. The D110M( D110_M ) released in 2024 has a smaller size than original D110. It can access the button without removing it from the holder.
This is the small version of my previous upload, the same here, if you have any questions than contact me.
Simple nestling bin for a Niimbot D110 label holder. It's a 1x3 and about 7u high if I recall. Has magnet holes, and shouldn't need any special settings from other gridfinity bins. For clarity, here's an Amazon listing for this item.…
Introduction I made this bracket because the spot on my door where the doorbell was is uneven. I have included 2 versions, one with a standoff to the right (mirror if your doorbell is on the left) and one that's flat if you would like to…
I needed a wall mount for my NIIMBOT D110 and some spare holder just for glueing them into my cabinet door, so I created those models. Just print them with your favorite settings and use double sided tape to mount them wherever you like.…
NIIMBOT D110 Label Maker Holder for IKEA Skadis Pegboards Print with supports for the pegboard hooks. Note: Print in my photo failed 75% into the print, but I decided to just use it to be eco-friendly.
Includes files for wall mounted and desktop version. Wall mount holes 40mm spacing. No supports needed, print on base as pictured.
Gridfinity for the new version of the Niimbot D110 (M). Two versions : Horizontal (3x1) Vertical (2x1)
Replacement for GV-EFD1100 IP dome camera. Tabs broke off the original. Used a heat gun to pop the polycarb dome out. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Category: Camera
This has been a long time coming. While I love my Denon D1100's that I bought many years ago in Japan, the one thing that I always noted was how weak the build quality was of the plastic hinges, and my pair has broken in many ways and…
Mount designed for the Niimbot D110 label printer, made compatible with the Multiboard PushFit system. This version is compatible with the 2021 (i think) model of the D110 (approx. 77 mm length). Check yours before printing. Supports are…
This is a remix of Schorsch3000's remix which can be found here: https://www.printables.com/model/1036580-gridfinity-bin-for-the-upgraded-nimbot-d110 . I added 4 compartments to be able to store rolls of labels to keep everything in one…
I gave my girlfriend a Nimbot D110 for Christmas, and she loved it, but wanted a way to keep the printer and some labels nicely organized. I liked the look of this Nimbot organizer , but I could never get the uploaded files to work for…
Mount your label printer for easy charging and use, all without taking it out of the holder.
Gridfinity 3x2 box to store a Niimbot D110_M label printer flat. It fits into e.g. IKEA alex drawers. Test fitted with D110_M , other D110 gridfinity boxes where to big. The design has a small cutout for the print port ensures a perfect…
This holder takes a Niimbot D110 label printer and mounts perpendicularly to an Ikea Skadis board to minimise footprint, using 2 of @davidmakes 's great Skadis Ultimount hooks . Allows full access to the power button, label printing (face…
This is a custom-designed holder for the Niimbot D110 label printer, made specifically for the IKEA Skadis pegboard system. It solves the common issue of loose pegboard accessories by using a reinforced mounting design. Features Solid…
I picked up a NIIMBOT D110 label printer, which comes in a small cardboard box—nothing fancy. I figured I could make slightly more efficient use of the available space to fit a few rolls of labels alongside the printer, all while staying…
I am a renter and my landlord would have a fit if I drilled a hole to mount a doorbell camera. So this one is a pressure fit that uses the doorbell's hole as an anchor. This is in no way as secure as screwing it in.
Print however, I did 20% with 2 walls and it hasn't broken yet.
Das Teil ist zweiteilig und kann nach dem Druck zusammen geklebt werden. Die Box ist “snack tight”, der D110 passt saugend in die Box. Zum entnehmen den Niimbot öffnen und am Deckel herausziehen.
Small stand for T14*40 labels from Niimbot D110 printer. Ideal for small displays, market stands. Not sure if other labels will fit. Print as print file and no supported needed
Ikea Skadis mount for Niimbot D110_M label printer. It differs from the D110 mount for the charging port position. It is possible to access the power button, print, and charge while on the stand. Printed vertical with supports in PLA, 15%…
Includes files for wall mounted and desktop version. Wall mount holes 40mm spacing. No supports needed, print on base as pictured.
you can buy it here: https://s.click.aliexpress.com/e/_c31yqiBp
