36 models
This model allows to mount a E3D-V6 or E3D Revo Six all-metal hotend to the JGAurora A5. It offers to either use the existing bowden setup on that printer or alternatively mount a Zesty Nimble Remote Direct Extruder V1.2 (mounting a V2 is…
This is a breech for your zesty nimble V1. It makes it possible to set up the tension to the extruder gear. I've printed the things in Prusament PETG with a Ø0.25 Nozzle. Feedback is welcome. Print instructions Use a small Nozzle and low…
All parts are correctly oriented for printing. For the fan ducts use supports from build plate only, I use Overhang Threshold: 10 on PrusaSlicer. All other parts print with no supports. V3-FanDuctLeft.stf and V3-FanDuctRight.stl are…
This is a JigDoll. You will need a 9mm dowel and a thin, springy board to use it. There is a short video to show what it does https://www.youtube.com/watch?v=g22-15_zhsE . It is a print-in-place - just make sure your adhesion is good. I…
The Zesty Nimble V1 is out of production and replacement breeches are very hard to obtain. Keep your OG Nimble running with this tension-adjustable, easy-to-print design! IMPORTANT: This design has been proven out in short-term testing as…
Dear HEVO and Zesty Nimble communitie, Here you find my mount design for the HEVO printer. My design includes the possibilitie to mount a E3D hotend (J-Head etc.) as V6 or Volcano and use it as bowden or with a Nimble extruder from Zesty.…
This is a 2 sided holder for TL-SG105 units, that makes them compatible with Wakoma Nimble racks
If you print one of these, please show me your make :-) I'm working on these project since a few month. Now it's time to release it, so you can use and test it. Here is a short BOM for the screws and nuts: M3 x 14 6pcs M3 nyloc nut 6pcs…
My original Nimble breech had lost one of it's ears. Glue held it together for some time, but it's not really working as well anymore as it used to. Since Zesty hasn't been selling the breech anymore for a long time now, I decided to draw…
I designed a mount for my Hypercube Evolution to fit the Orion module from precision piezo and the Nimble from Zesty. I use the groove version of the Orion module. For cooling the coldend i use a Nocuta 40x20mm fan. I put the fan on the…
Titan Aero dedicated x-carriage and matching motor+idler ends for I3 style printers using 8mm rods. The benefit of this assembly is a nozzle that is close to the XZ plane for better use of Y dimensional space, a probe mount that is closer…
Zesty Nimble Flex is using gear ration 30:1 which can be on the high speed printer very limiting factor. This is speedup gearbox with 3:1 gear ration ( final zesty reduction is 10:1 ). It allow me to speed with a higher flow rate without…
This adapter is designed to mount the Nimble V3 Flex on a FLsun Super Racer effector. It replaces the factory aluminium cage that holds the three fans and is secured from underneath with the original pair of M3 bolts. 5 x M3 x 6 x 4.5mm…
A mount to attached a Nimble to an Anycubic i3 Mega. This is designed and tested against a genuine E3D V6 hotend with an adapter should work with the original Anycubic hotend. Longer M3 bolts(25-30mm) are needed than the original bolts…
This design is intended to mount a Nimble V1.2 to the original A5 printhead. It is not suitable for the newer Nimble V2. The design uses a right-handed nimble . It uses the existing bowden coupler to fasten the adapter to the print head.…
Left & Right X-Carriage brackets modified to fit the Zesty Nimble Extruder | https://zesty.tech/ Refer to the original BigBox IDEX Bowden for details | https://www.thingiverse.com/thing:2073946 Print with your favourite thermoplastic |…
printed on the Prusa mk3s+, this petg mount is made to sit on the top of the ender 3 v2s extruder case and to screw into its heatsink temperature: extruder all layers 240c, bed first layer 85 other layers 75c layer height: .2mm nozzle…
* Print the funnel WITHOUT support, and the main clip WITH support. * Inspired by klosterkim 's Nimble-Palette-bowden-connector but built from scratch, this is a Mosaic Palette 2 outgoing tube clip for the Zesty Nimble . I believe I have…
This is a X-Carriage for MGN12H- Linear Rails to mount a Nimble and a BLTouch. I included a Shim to adjust the trigger height on the BLTouch depending on the heatbreak that is used. Support is only needed on the BLTouch mount. Everything…
I've redesinged my old extrudermount. It's now shorter and fits an Sliced Engineering Mosquito. I've also removed the retrainer for the Piezo. Still Work in Progress I desinged a new mount for my Misumi Rail and now i have to rearange all…
Here's the mount for the Nimble V2 extruder mount, required no modification to the Anycubic i3 extruder. Use theNimbleV2-mount.stl for genuine E3D only. I will upload picture of this running on my printer soon. It will not work on the…
This is a re-designed gimbal mount for the Zesty Nimble. As the original mount by slonolod was designed to mount on a delta printer, I had to re-design the parts to fit on a 3030 aluminium extrusion frame of my Hypercube evolution. I…
The Nimble V2.0 has a serious design flaw which becomes very obvious when the Nimble is used on the E3D Toolchanger. The cap that mates the rotating cable housing to the top of the Nimble body is locked in place with 3 very tiny tabs…
This mount allows you to use existing mount hole and the nimble stepper adapter , the only thing needed is some m3 screws and nuts Category: 3D Printer Parts
I remade the V2.1 nimble mount with the original hyper cube mounting holes. I haven't printed it out yet but will as soon as the weekend rolls around. Let me know how it goes. EDIT: I cant measure. I have fixed the size of the holes for…
Remix of: https://www.thingiverse.com/thing:2783054 Adaption for the newer and smaller TC-02 hotend with some additional modifications: usage of M3 nuts instead of knurled inserts for mounting BLTouch mount (needs knurled inserts) holder…
This is a mount for the Creality CR-10 family of printers (and others with the same X carriage) with the PrecisionPiezo Orion Z probe and a Zesty Nimble remote direct extruder. You'll need a PrecisionPiezo Orion. I recommend you get the…
Adds support for df5015sm blower fan (stock from ANET A8) - no more glueing :). Category: 3D Printer Parts
Same as original except objects are manifold and slice in Slic3r now. Category: 3D Printer Accessories
A mount to attach a Zesty Nimble to a RobotDigg delta effector . It can be used together with my 1730 hotend mount . Category: 3D Printer Parts
I found the location of my stepper motors was causing the drive cables to torque the worm gear shell of the zesty nimble CC, and these braces between the drive cables significantly reduces that (which will hopefully give me better print…
A remix of a remix! A friend of mine is getting the Zesty Nimble, and I thought since I already had this design fresh in my mind that I would adapt it to the Nimble. I have no idea if this mount really works or not, so if anyone is brave…
The Nimble project aims to create network systems that are offline and local first, can utilize the Internet when available, and can be set up anywhere. There is a web app to configure a 6-inch Nimble network rack here , and that is the…
This is a mount to fit the Zesty Nimble with an E3D V6 Hotend on the TT Sapphire S. Its based on parts of the MGN BLV Project ( https://www.thingiverse.com/thing:3382718 ) and parts desigend by ZestyTech for the BLV. Please note, that you…
There is a version with 1.2 mm wall thickness and a thin version with 0.8 mm wall thickness. Recommendations: TPU (as it is non-scratching) 0.4 mm nozzle 0.2mm layer height
2025 Update: In 2024 we received a grant from NLnet Foundation to develop a smart documentation system which automatically generates all documentation and 3D models needed for any custom nimble configuration. With our incredible partners,…
