1 / 15
Parts Cooling Fang 2x5015 for Creality Printers. E3Dv6, Mosquito, NF-Crazy with PrecisionPiezo Orion probe and Zesty Nimble extruder — image 1
1 / 15

Parts Cooling Fang 2x5015 for Creality Printers. E3Dv6, Mosquito, NF-Crazy with PrecisionPiezo Orion probe and Zesty Nimble extruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

All parts are correctly oriented for printing. For the fan ducts use supports from build plate only, I use Overhang…

Rating
0 / 5
Likes
12
Downloads
46
Makes
0
Views
815
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

All parts are correctly oriented for printing. For the fan ducts use supports from build plate only, I use Overhang Threshold: 10 on PrusaSlicer.

All other parts print with no supports.

V3-FanDuctLeft.stf and V3-FanDuctRight.stl are secured to the mount using 2 M3 hex nuts and 2 M3x6mm bolts.

V3-FanDuctMount.stl and V3-HotEndMount.stl attach to the X carriage using 2 M3x6 bolts each.

This was designed primarily to be used with a Slice Mosquito or compatible hot end. I have a Mellow NF-Crazy Magnum from Aliexpress but it's also compatible with E3Dv6 and clones.

It's been working great. Check the pictures for bridge and overhang performance.

Video: https://www.youtube.com/watch?v=p7-MagSMBMQ

Print Settings

Printer Brand:

Creality

Printer:

CR-10 Mini

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Filament:

SUNLU PLA+

Blue


Notes:

This printer is a highly modded CR-10 Mini. Main mods:

* MKS Gen L controller board * Raspberry Pi 4 with Octoprint and Klipper * Klipper firmware * TMC2208 drivers * Zesty Nimble extruder * E3Dv6 hot end, soon to be replaced with a Mellow NF-Crazy (Slice Eng. Mosquito clone) * PrecisionPiezo Orion Z probe * Fixed bed * Mechanical Dual-Z

Category: 3D Printer Parts

Tags