Parts Cooling Fang 2x5015 for Creality Printers. E3Dv6, Mosquito, NF-Crazy with PrecisionPiezo Orion probe and Zesty Nimble extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All parts are correctly oriented for printing. For the fan ducts use supports from build plate only, I use Overhang…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 812
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
All parts are correctly oriented for printing. For the fan ducts use supports from build plate only, I use Overhang Threshold: 10 on PrusaSlicer.
All other parts print with no supports.
V3-FanDuctLeft.stf and V3-FanDuctRight.stl are secured to the mount using 2 M3 hex nuts and 2 M3x6mm bolts.
V3-FanDuctMount.stl and V3-HotEndMount.stl attach to the X carriage using 2 M3x6 bolts each.
This was designed primarily to be used with a Slice Mosquito or compatible hot end. I have a Mellow NF-Crazy Magnum from Aliexpress but it's also compatible with E3Dv6 and clones.
It's been working great. Check the pictures for bridge and overhang performance.
Video: https://www.youtube.com/watch?v=p7-MagSMBMQ
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Filament:
SUNLU PLA+
Blue
Notes:
This printer is a highly modded CR-10 Mini. Main mods:
* MKS Gen L controller board * Raspberry Pi 4 with Octoprint and Klipper * Klipper firmware * TMC2208 drivers * Zesty Nimble extruder * E3Dv6 hot end, soon to be replaced with a Mellow NF-Crazy (Slice Eng. Mosquito clone) * PrecisionPiezo Orion Z probe * Fixed bed * Mechanical Dual-ZCategory: 3D Printer Parts