Counting matching models…
This remix is designed for the Creality CR-10 V2 . 7/30/2020: Mount V3 - I lowered the hotend 2 mm to to allow for the bed springs to be a bit more compressed. This should keep your bed level adjustments in tact better and keep the level…
I know Petsfang ducts work well and I wanted a good 5015 fan duct for my Ender 6 but the design I found on MakerForum made by Makermike wouldn’t clear the cable chain mount I installed. After a bit of tinkering I found if I reduced the…
Created these bases for my Voxelab Aquila. This consisted of extending the left side of the base and adjusting the location of the screw hole to fit on the Aquila. Did this for the Blokhead / Bullseye base as well as the v2 Petsfang base.…
Remixed the original with an offset for the Petsfang mount. The front has a smaller offset than the back based on the duct I have installed so I made 2 files. I also hollowed out the center cone to save a little weight/plastic and notched…
Hello! This is the first time Ive modified/created anything. I hope this helps someone. Its a modified Bullseye base to fit a Creality Spider 4.0 hotend to a CR10/Ender. Its much wider and taller than the MK8 hotend and the wiring coming…
Remix of: https://www.thingiverse.com/thing:4771559 Original design: http://www.dpetsel.com/files2print.html
My first remix of the right probe mount for the petsfang base Mount did not fit the CR Touch well so I made some modifications to allow clearance of the ribbon cable, and removed the middle hole as it was useless 1/2/22: Realized that the…
for the petsfang bl touch mount, I found that the bl touch couldn't reach the build plate even at its lowest setting. so what i did is completely redesign it so that it would firstly go a bit further down than the old design, but also if…
Petsfang is a high quality fan duct for Creality CR10s and other printers : https://www.thingiverse.com/thing:2759439 I wanted to mod my CR10-V2 but had to remix the adapter plate to fit screw and pins locations on the machined carrier of…
I liked zeegoo's fan cover for the ender 3 control board and decided to mix it. As i could not find a cover for the petsfang 5015 fan mount I used two of zeegoo's covers and mixed them to work vertical to allow for cooler air to be…
This is an Ender 5 Pro X-axis Carriage for Petsang Cooler
It's a redesign of the CR10_E3DV6_MANUAL_BASE_V7.5.stl part from petsfang v2 ( https://www.thingiverse.com/thing:2759439 ) This new part fit the specific Funssor CR10(-S)/Ender replacement carriage available on aliexpress here…
I wanted to try the petsfang duct but there wasn't a mount for the ender 5 with an E3Dv6 hotend at the time, so I modified the CR10 base to fit.
Couldn't find an adapter for a Petsfang duct to install on my friends Tevo Tarantula, so I made one. Haven't installed yet, but it should work fine. You can download the other parts for it here, https://www.thingiverse.com/thing:2759439 .…
I took inspiration from v_rod_fer's version and made it from scratch, since his STL is way too big and I needed a different diameter (8 mm) for the dial indicator. I adapted it for the new base file (BB_Stk.Base.E3v2.E4.E3_3.11.21.stl)…
This is modded version of Petsfang Bowden Direct with Bondtech BMG for Ender 5. Left mount BLtouch. I cannot use my stock Dual extruder's screws on the original base, so I added more ticker at motor mount so I can use M3 40 mm screws I…
This remix only works with v6 and BLT only. It does not work with EZABL. And I only have a Ender 3 Pro to test it on. This is a remix of Petsfang Bowden Direct with Bondtech BMG hotend mount (works with v6 and BLT only) with the following…
This is a mount for an endoscope camera in combination with a Petsfang Bullseye on a stock Creality CR-10s. It winds around the petsfang to point the endoscope directly at the nozzle. The mount is supposed to be attached to the left of…
This is a adaptive plate for adapter the famous Petsfang This is can usage latest versions for modular petsfang designs this plate for Two Trees Bluer And Two Trees Bluer Plus Adapter links below normal bowden link:…
I needed to mount an endoscope (9.9mm diameter, purchased years ago here: https://www.amazon.com/gp/product/B00JERRES6/ref=ppx_yo_dt_b_search_asin_title ) to the Blokhead fan duct system from Petsfang. Designed in Fusion360, it holds the…
Mount with the fan screws to add a endoscope for monitoring your print nozzle. If you like my work, you can support me with a donation via paypal! Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: / Filament: / PETG / Notes:…
BlTouch for Petsfang Duct MicroSwiss E3
simply pen holder for petsfang (cr10 https://www.thingiverse.com/thing:2759439 ) mounted on the left instead of bl touch 3*M3 bolt pen hole to 12mm Print Settings Printer: custom Rafts: Doesn't Matter Supports: Yes Resolution: doesn't…
Remixed the PetsFang v2 to fit the Ender 3 max neo. It is not the prettiest thing, but it works. I used the Ender 2 v2 baseplate, and modified it to fit the Neo's factory hotend. Then had to modify the Fangs mounting points to fit the…
This is a remix of: Petsfang Direct for E3D Titan Direct Extruder for Micro Swiss/ E3Dv6/ or Stock CR10 & Tevo Tornado hot ends. The files are on Thingiverse at: https://www.thingiverse.com/thing:2907538/files This remix adapts the…
Mount for: BFPTouch - Poor's man BLtouch. A simple, cheap, neat, precise, compact and reliable any surface Z Proble for bed leveling. by brunofporto https://www.thingiverse.com/thing:2890290 which I really recommend. It's cheap and 8-10 x…
Additional part for https://www.thingiverse.com/thing:2907538 by dpetsel My upgrade to prevent small moves of direct extruder during retraction. Extruder was supported from one side only with STOCK_TEVO_DIRECT_BASE_7.14.stl. Now it has…
I wanted to change the heatbreak fan from being in the front to the side. so airflow isnt being blocked by the mounting bracket. I decided to convert my Bondtech to a Sherpa because I could fasten it firmly above the hot end as to not…
I love the petsfang fanduct, and I recently got the Biqu Microprobe, but there are a few minor issues with the petsfang probe mount. The probe mount is quite far away from the nozzle, so it won't be as accurate, and making the fanduct…
I love the petsfang fanduct, and I recently got the Biqu Microprobe, but there are a few minor issues with the petsfang probe mount. The probe mount is quite far away from the nozzle, so it won't be as accurate, and making the fanduct…
