537 models
This is a variant on Dummy 13's chest and abdomen parts, giving it a more feminine build that is aesthetically consistent with the original design. These parts are a drop-in replacement for the ones included in the main Dummy 13 model.…
This is a support free print by design, you can print the fox and the base separate or together. My print was done using filament that changes color based on temperature (Amolen tri-color volcanic) and the effect is amazing but needs some…
I really like the Dummies-13 on runners, for gifts - but why only the masculine version ? So I remixed the plates to replace the “masculine” parts by “feminine” ones. It's called Duffy-13, the double F being the mirror of the double M for…
UPDATE 05/09/2023 The kit has been slightly updated with easier and less fiddly construction, clearer surface detail, tighter tolerances, and the upper ring being pre-attached. Available as a kit or frameless. All previous files will…
Dummy 13 – Feminine / Female Torso (by soozafone) – KitCard Hey maker! 👋 I’m a big fan of Dummy 13, especially the version with parts in a frame for easier handling. Since there wasn’t a framed version for the female parts, I designed…
Original part : https://www.thingiverse.com/thing:3985253/files
Easy verticle print. Edge might not print well on a smaller (i.e. 100%) scale due to poor topology and weird polygons. Other than that what you see is what you get, goes well with rounded thighs.
Canine heads for dummy 13 Chest Armor - https://www.printables.com/model/1062776-dummy-13-lstr-engineer-armor Legs - https://www.printables.com/model/1085859-dummy-13-digitigrade-leg-kitbash Tail - https://makerworld.com/en/models/1088296…
Preface This head was designed specifically for smaller printers, with a minimum build area of 18cm x 18cm x 18cm and to use comparatively little filament (a little over 200g), while still holding up against accidental abuse. If you don't…
Based on the Kurama figurine as seen in Boruto (screenshot below), this little nine-tail fox demon is a print in place, with supports. I printed in orange PLA and painted with acrylic paints.
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The model is scaled for costume size…
Sculpture of a japanese mythological creature - kitsune, nine-tailed fox). Designed to print without supports! Print instructions Should print without supports if your printer can do short distance bridging. The gcode works on Prusa MK3…
Print profile includes armor parts only and the frame from original is needed. Also guide for assembly is available in the original by soozafone. Support them for making this amazing model!
only dupont connectors needed remove the plastic and bend the pins accordingly(2mm between pins at the end) the pins should stick out about 1~1.5mm out from the surface if you can't make this just buy this…
An upgrade to Monorim MX0 to allow stable rides without wobbles way beyond the 100kmh barrier. Needs sheetmetal manufact
Wall mount for Ninebot ES2 Scooter. Can be attached with strong double-sided tape or screw into wall. I would recommend resting the scooter front wheel on the ground and use the mount to brace the scooter to the wall. **** I would not…
“Every day, ere the hour of dawn, the gardeners would pick the roses which lined the four avenues of the garden, and would pile them in the center of the floor of His blessed tent. So great would be the heap that when His companions…
Combined can holder and hook for attaching to steering shaft. M3x5 screws + nuts used.
Update03: Added Bracket for heat inserts M3x4x5mm. Update02: Added bottom hook for U-LOCK - ULTRA COMBO 245/153C. Update01: Addetd top hook for 25mm thick shackles with inner Diameter 100mm. Since theft protection is an important issue…
After printing the original model of the Runabout i wanted te build a bigger version. One that could have LED lights installed to make the model come to life. The model is 1/70 scale and so the total length of the model is 33 cm (13…
The last pieces I need to smooth out my whole model was to round out were the shoulders and biceps. The biceps pieces from Smooth were good, but it needed better shoulders. I had to tighten them up, and make them smaller and more fitting.…
Cozy Canine Sculpture 3D model ready to print.
I couldn't find any commercially licensed dummy 13 chests with breasts, so I sculpted some in Blender. 3 bust sizes available. Printable without supports by placing the shoulders on the build plate. For best results, use the corresponding…
A Flexible Sock to go over the Scooter's side stand. Reduces chance of damage to floors and ankles and shins. I used: Filaform RED90A 0.8mm Solex Nozzle 100% infill If you place the closed end on the build plate, no supports are required.…
full twist throttle for your ninebot scooter
My cousin saw those dopamine and seratonine earrings on 9gag and wanted me to make some for her - i accepted the challan
infill:30-100 supports: yes brim: optional walls: 2-4
Just a variant from soozafone's feminine torso, without the numbers, I couldn't find one so I made it
The Crew: The Quest for Planet Nine is an addictive collaborative trick-taking game. There are a couple of other nice organizers available but this one was designed to support a few "improvements": Sleeved cards Token cases to protect the…
"Concerning the number nine: the Baháʼís reverence this for two reasons, first because it is considered by those interested in numbers as the sign of perfection. The second consideration, which is the more important one, is that it is the…
JREV Floor Extension
I redesigned this hook to both improve the general look and feel to more seamlessly blend in with the general design of the Segway Ninebot Scooter and I also wanted to make it stronger and more effort to remove. This hook can easily…
I scanned my Gothic chessmen by Ganine in salon size. These were seen in a few star trek episodes on the famous tridimensional chess board. These should be prinatble with any fdm printer with a minimum of supports. You need for each color…
3d-printable blue mug from Star Trek
This model features a fox in a dynamic, graceful pose with nine flowing tails that swirl upwards like smoke. I designed it to capture a mythical kitsune vibe, focusing on smooth curves and a sense of movement throughout the piece. The…
Et voilà, I present you a box for your chess set and checkers tokens that comes with a chess and nine men's morris board integrated into the lid! But that's not all, it also comes with a checkers token. (No chess set included as of now,…
This is a simple, fully 3D-printable charging port for the Ninebot G30/G2, designed with flexibility in mind. You can choose between versions that accommodate an XT60 connector with or without a button, depending on the file you select.…
Deep Space 9 , unofficially known as DS9 , and originally known as Terok Nor , was one of the most historically , politically, and strategically important space stations in the Alpha Quadrant during the latter half of the 24th century .…
Taschenhalter für Segway Ninebot Max G30D II Die Tasche wird normal Innen befestigt. Ich bin jedes Mal beim Auf oder Absteigen daran hängen geblieben. Wenn man sie Vorne und am Lenker befestigt, wird das Licht verdeckt und man kommt…
Ninebot G30 Spacer is used to install a bigger battery in the battery compartment. This is my version with 7mm walls. If needed you can grind down the top siderails where the spacer is mounted for even more space. Perfect for…
Rear Axle Bracket as reinforcement and for 125mm axle drop out motor brake disc mount adapter
Nine Inch Nails NIN Logo - 3 files included. One is just the outline, the other two are "signs" with backing layer as well, 4mm and 10mm high. 180mm x 80mm x (4 or 10)mm. Color change at (2 or 5)mm on for the sign STLs. Pictured print is…
BMW Part No.: 34527664098
DO NOT REPOST ANY PART OF THIS MODEL WITHOUT PROPER ATTRIBUTION! FOLLOW THE CREATIVE COMMONS ATTRIBUTION NON-COMMERCIAL SHARE-ALIKE LICENSE TERMS! USE THE REMIX BUTTON! This was more of an experiment to see if I could create such a thing,…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Arcanine, Tabletop DnD miniature 50 mm Large base which can be used for DnD and other Tabletops.
These are cases to protect the cardboard tokens in The Crew: The Quest for Planet Nine. They were designed using my custom cases OpenSCAD Customizer script: https://www.thingiverse.com/thing:4160162 . I usually print them in…
The parts "Clip", "main-short" and "crew" are from the original model of the author PlasticBarista I designed a new "jaw" part because I had already broken the original model several times. It has two holes for 6mm aluminum rods. Hardware…
These models extend the handlebars of a G30P 25mm for better control. For use with stock grips. This update vastly improves rideability of the scooter. Snug fit, will require a rubber mallet and finesse. I suggest printing more than two.…
Base holder is made out of two parts, front and back. Update 20240806: There is now a V2 with mountable threads also for front and back, can be combined with old V1 for left, back and right or left, front and right mounting. Screws and…
A practical modification for your e-scooter
From thumb throttle to hand throttle
Simple test to find out if your bed is level. This STL contains nine squares of 30x30mm each, 0,2mm high. Notice: Slice with 0,20 resolution Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0,2mm…
For Ninebot Es1 Es2 Es3 Es4 kickscooters.
I modeled this handle to carry this scooter more easily by one hand, if mounted as in photo, its quite balanced. If you want, you can print one piece of “Handle clamp hole” so you can carry your allen key here as in photo. I've been using…
I created a clip for a Ninebot G30P electric scooter to attach a cup holder. I used one of the Rivian Cup Holder cups and added a custom flower. The flower petals and center are each separate bodies so they can be colored independently…
This is a version of the well known “Mühlespiel” or “Nine men's morris”. This game is easily transportable and can be played in a car, train or plane while traveling. The lid has been designed in such way that it is easily taken off to…
Handlebar Bracket for 31.8mm handlebars
10cm vysoká Liška
Here is a 20s6p 21700 cell holder designed for the Ninebot G30. V1 460mm (L) x 117mm (W) x 23mm (H) V2 460mm (L) x 117mm (W) x 13mm (H) making it an ideal fit between the two weld seams in the frame. It also provides sufficient space on…
Here we come again! Second design on the thematic diorama series for each Warhammer Underworlds band. Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing : 0.4mm Nozzle 0.08 to 0.12mm Layer Height…
AJED Rear Axle Brake Bracket for Ninebot MAX G30 This bracket is to mount a rear brake system + increasing the maximum torque transmission (It acts like a huge torque washer) Please use maximum 2mm washers on the inside, otherwise a 125mm…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). Ventilation holes were added for better heat-exchange. The lower jaw is movable. The model is scaled for costume size - rescale it if…
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
It is a minimal fursuit head-base, that can be attached to a balaclava. A simple to make dog costume head with a movable jaw. Category: Costume
Safety for the Ninebot folder mechanism. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Notes: I used archimedean chords infill to have more flexibility.
i made my own rear fender for the Monorim rear suspension, the one they supply is a 2 part fender that is just horrible in my opinion. I broke min within 1 week, so i designs my own. when you print is you need to slice it in half and if…
ideal for covering with minky or fleece. not so ideal for painting or using as is
Ninebot G30 Stealth Spacer Here we offer a few free spacers which can be 3D printed by everyone. Please note the license agreements before downloading or using these files. These spacers are NOT compatible with our aluminum floor system.…
Case used: https://de.aliexpress.com/item/1005009165100557.html?spm=a2g0o.order_list.order_list_main.40.30d95c5fX0qWQt&gatewayAdapt=glo2deu
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…
Transform your vanity into a charming beauty space with this elegant Coquette Makeup Brush Holder STL . Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit my Patreon for reseller options and…
I've included the STEP and STL files. And there's a frameless version for easy color swaps. Rock on.
One of our exciting releases of a headphone or headset stand featuring a favourite Pokemon of ours.. This headphone stand comes in 2 parts, the actual stand with the figure and then the headphones holder to slide onto it and can be glued…
This is a boardgame optimised for a prusa mini Print settings: Board: Standard settings 2 filament changes PLA Stones: Standard settings Grid of 3x3 stones PLA Happy playing! :)
Print with at least 40% cubic infill Fits in and replaces the original fender
The plastic hook on my Ninebot ES4 had cracked and broken off a few times too many, so I designed and printed a replacement. You will need two socket head screws M4x16mm. My personal hook is printed in 17-4PH Stainless Steel on a…
Domino sets include a Double-Six & double-Nine Domino Set. Holders designed for 6 Dominoes and include vertical and angled versions.
Moving the taillight. a closed mud wing.
Floorextension 20mm
I searched for the Nine Men's Morris board game to print, but couldn't find one. So I created myself one with Fusion360. Board size is 175x175mm, it can be printed on the Prusa Mini. There are two versions available (both use the same…
The thing that this thing is based off is so flimsy! I accidentally dropped my e-bike and it broke off. So I started to look for replacement parts. I know this thing can be found easily on Alliexpress on the cheap but my problem is it…
Mounted with M3x5 screws + nuts
DISCLAIMER: I DO NOT ENCORUAGE STEALING OR (AND) THE USE OF THIS MODEL IN ILLEGAL WAYS, IT IS CREATED FOR RIGHTFULL OWNERS OF NINEBOT SNSC SCOOTERS THAT HAVE BEEN OFFICIALLY BOUGHT. Ninebot SNSC battery latch release key, features 2…
This is kinda ugly TBH but maybe someone can use it as a base for modding lol
This is the world's hardest 9-piece puzzle . Based off the original puzzle “One Tough Puzzle” with 48,216,320,409,600 (over 48 trillion) possible combinations, this seemingly simple puzzle is incredibly complex. Challenge your friends to…
Low poly Ninetales, the majestic Fire-type evolution of Vulpix. A legendary fox spirit in low poly style.
Baha'i nine-pointed star with inlay. Attached SVG file can be used to cut the inlay with a cricut cutter or similar. Category: Decor
Archive of all Ninebot G2 Scans
small video preview gland TC 16х30х4,5 example: https://ozon.by/product/manzheta-armirovannaya-salnik-tc-16h30h4-5-1281241717/?__rr=1 https://youtube.com/shorts/HhOks5Je0Po Category: 3D Printing
Numberplate holder, needed in certain countries together with JREV Rear Fender
Complete collection of G30 scans
