53 models
Nokomisig Aabijijiwan / Grandmothers Little River. Loosley Based on Ojibwe Regalia * translation: feel free to correct my Ojibwe conjugation.
Print approx. €13.82–€16.89 excl. taxPreliminary estimate for one variant
Replacement knob for KORG nanoKONTROL2 Print instructions I recommend to print it in PETG with elephant foot compensation on. Infill 100% prints in about 15 minutes. No supports are needed but you might have to clean up the ceiling inside…
Repairs. added .4 offset to entire model. Solidified, sculpting on distorted fixed mesh. New eyes. Kind of a last minute add. Not really satisfied with look as I was unable to add the uv details for some reason. Put some time into it so I…
This is a quick little stand to hold up a Korg nanoKONTROL 2 up off the desktop. I use mine as an extended control surface for desktop stuff (volume, screen brightness, etc), so I wanted to have this right behind my keyboard. In case…
I started from the nanokontrol2 fader Cap uploaded by xantharian and I made a couple of simple changes. Be reassured, these fader caps work interchangeably on either version of the korg nanokontrol (1 or 2) Print instructions Category:…
I saw geodesign's grid and canals for Takenoko and really liked the models (maybe because just the day before we'd managed to accidentally knock over our elaborate tile layout ☹). However, I really wanted single tile holders, not triples.…
Probably the first upload of Nokotan's antlers on this website, all parts are included and correctly scaled in the shikanoko.3mf file. I recommend printing the headband with 4 wall loops or 100% concentric infill You can either glue the…
Wanted a phonecase for my cyberpynk halloween costume. Case is made for a galaxy S20 FE, but f3d file is included for remixes. 15xm3 sqrews were used with 2xm5 heatinsert for antenna cable fitting. i also used two magnets to make the…
This is a clone of the nanoKORG's knobs. Attention: A 0.25mm nozzle is required to slice and print properly. Tolerance has been adjusted for printing with PETG black. Print at default orientation (as is). Print Settings Printer Brand:…
Dock to house the Nanokontrol2. I used this with MidiMixer and the WaveLink plugin to control the Wavelink sofrtware from Elgato. I've modified the model slightly since I printed it but not tested it due to having a new setup now.…
The original box insert for Takenoko is actually really nice and functional. However, there are reasons I designed a custom insert: A) I use sleeved cards. I've seen some discussion on what size fits but in my hands the Mayday mini size…
EN: Hello gardener, or panda..? I wasn't happy with the original insert so I decided to make my own. Also, I couldn't find a variant anywhere on the internet that would support a portrait box (the components didn't spill out and 50% of…
Two bamboo-themed inserts for Takenoko. One (print it 3 times) for bamboo sections, one for blue watering pipes. Version 5 of the tray is easier to print, yet less cute, than V4. Deux boîtes style bambou à insérer dans la boîte de…
The 3rd edition of Nokosu Dice (designed by Yusuke Matsumoto , artwork by Sai Beppu , and plublished by Engames ) introduced additional components. These files are for owners for the 2nd edition who would like to add the additional…
Templo Japones divido en partes para impresión en colores y montaje Figura complementaria para el juego de mesa Takenoko https://modding-maab.blogspot.com/2023/01/takenoko.html
The "nanokontrol2 stand" is specifically crafted to enhance the user experience of the Korg nanoKONTROL 2, a compact and versatile MIDI controller. This stand raises the controller to a more ergonomic angle, improving accessibility and…
Tsuchinoko = real! Tsuchinoko are a cryptid from Japan, a snake-like creature few have claimed to seen, but are still fun to think about! Regular files have a flat bottom for FDM printers; files ending in SLA are rounded underneath for…
An edit for Josh Myer's stand with holes so they can be wall-mounted. I mount mine above my secondary keyboard for controlling voicemeeter on my steam setup. .blend included if you want to adjust the size of the holes using the cylinders…
Model by AJade uploaded from thingverse.com
This is a stand i designed to angle and fix my KORG nanoKONTROL2 to wooden desktop stand. It is now easily accessible and doesn't move around while using it. The stand is designed to be screwed into the wood (see pictures).
Korg nanoKontrol2 holder for Arturia Keystep for my perfect DAW setup. You can use the original screws for attachment. Printer: Ender 3 V2 Filament: PLA Infill: 25% Duration: 2h per part Support: not necessary
A simple stand for nanoKontrol2 Midi controller. Print 2-off stands, one at either end of the controller. I ended up using double sided tape to hold these to my table so it didnt slide around when I used the sliders on the controller. The…
Nokotan's antlers from the anime Shikanoko Nokonoko Koshitantan (a.k.a. My Deer Friend Nokotan), hollowed out so you can use them to store food, explosives, or LED strips! Slide two M12 nuts into the headband. Assemble the antler parts by…
A simple little stand, I didn't like the angle that most others put it at since I have labels on the front of the Korg that can't be read if it is angled any more. Plus using the faders at a steeper angle feels odd to me. Placement of…
Refonte complète du rangement du matériel du jeu Takenoko et de son extension Chibis. Le tout est ajusté pour être mis dans la boite du jeu original. La conception est totalement personnelle à l'exception des supports des tuiles/parcelles…
Alternative knobs and faders for the KORG nanoKontrol 2 or anything else that follows a similar dimension. You can print them in different colors to "label" each channel. For more details and building process:…
Remix of mentioned model. Optimized for print speed and filament use reduction. Chibis holder added for Panda mama and tokens. First layer is printed faster. Added covers for option of vertical storage. 5%infill, 0.3mm layer.
It is recommended to make this with supports. But you need omit the support for the middle section, if you ignore this, you might have some trouble to remove the filament in it. Print Settings: 20% infill Supports: Yes
Quick first version. Improvements may follow if I find them useful. Print two of them. One for each side. Tested with 0.3mm layer thickness on MK3S+. No supports needed.
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces. Print 2 big trays and one normal tray.
Fixed manifold using https://www.formware.co/onlinestlrepair
This is a stand designed to hold 2 KORG nanoKONTROL2s. I found the original part on thingiverse and it has worked amazing, so much so that I wanted a second one! All I did was cut off the bottom holder part, flip it around, and attach it…
I removed the wristwatch band so that it could be attached to the back of my hand. I needed to output with as soft a material as possible, and I output with TPU. Output 4 attached pins and use as follows. 2 pins for fixing the watch 2…
This model fits on standart 220x220 bed size printers when rotating the “part2” by 45 degrees I printed at .2 mm , 10% Gyroid, 3 walls and 0 top / bottom layers
Small desk stands which are used in a pair (2) to slightly raise the back of the Nanokontrol2 midi controller. This makes is easier to see and control the buttons, sliders and knobs. 2 x 4mm holes are present to create a rigid stand when…
Replacement box for Takenoko Board Game. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 5% Filament: Generic PLA RED Notes: Printing instructions: For parts cards and bamboo containers…
Takenoko + Chibies in Chibies Box Insert for game + extension v2 adjustement to fit better (larger box, ext card sep)
Custom icons for NanoKontrol2 Dock. These are a bit wider as to be centered on the faders without any gaps.
A stand/riser for the Korg NanoKontrol 2, slides snugly on to the beveled edge so it's nice and stable. 2 required. At least 10% infill, no supports required.
NanoKONTROL2 Angled Holders A simple and ergonomic stand for the Korg NanoKONTROL2 , designed to tilt the controller for better accessibility. Ideal for music production, studio setups, and live performances. Easy to print and use!
Enhance your Takenoko gameplay with this custom-made magnetic base. 3D printed for precision and durability, it securely holds game tiles in place, adding stability and a premium feel to every session.
Created this for a Mixing Station controller rig. Needed a flat mount for the controllers, as I am using the rig mobile, holding it with one hand. The iPad Air and nanoKontrol2 holder can be found here .
I'm new to the 3D modelling world so I didn't know how to download and remix their file so had to recreate this in tinkercad. I've made some adjustments from the one I have printed (In my pics), rounded off the edges a bit and made the…
Antlers: There are 2 versions of the antlers: v1 is supposed to be printed flat horizontally, it fits on a 225mm bed print with 3 perimeters and 15% infill v2 is smooth on both sides and is supposed to be printed vertically (223mm) print…
Created this for a Mixing Station controller rig. Mounting an iPad Air and a nanoKontrol2 together. The dual nanoKontrol2 flat holder can be found here .
A simple little insert for the card game Kinoko. Fits the included dice and tokens underneath the cards. the instructions fit on top. Holds everything in place and organized. There was a slight amount of pressure to push it down into the…
This model itself contains no generated geometry and no AI-based concept ideas. The basic idea behind this project started with a Creative Hideout Design Contest, which focuses on clever hidden features, and one idea simply led to another…
Templo Japones divido en partes para impresión en colores y montaje Figura complementaria para el juego de mesa Takenoko https://modding-maab.blogspot.com/2023/01/takenoko.html
Antlers: There are 2 versions of the antlers: v1 is supposed to be printed flat horizontally, it fits on a 225mm bed print with 3 perimeters and 15% infill v2 is smooth on both sides and is supposed to be printed vertically (223mm) print…
Shikanoko Nokonoko Koshitantan
