123 models
Inspired by the "Sisyphus Auto-Rewind Spool Holder" made by Vincent Groenhuis I thought it would be much better to replace the original spoolholder with one that works based on gravity as well. The main issue this spool holder solves is…
Filamentguide für Prusa MK3S+, obwohl es schon jede Menge davon gibt, habe ich meinen eigenen konstruiert. Er ist von vorn zu befüllen, ohne das Filament entladen zu müssen. Die Löcher dienen zur Fixierung von Filamentenden einer zweiten…
Only Filamentguide
This "remix" is based on the design by Ben: https://www.printables.com/de/social/198819-ben/about I needed the holder for the right side so I mirrored it. Maybe someone can use this as well :)
The following parts are required for assembly: 1x M4x10 countersunk screw 1x M3x10 countersunk screw 1x M3 nut (forMK3.5 Tubeholder_Bottom) 1x M4 threaded insert (for MK3.5 Tubeholder_Bottom)…
Oni Cyber Punk Mask by SeanAranda From Thingiverse. Posted here due to Thingiverse losing popularity and Creator being MIA for over a year. I have also added the remixed version that is preassembled. A brilliant design i wanted to share…
Link to connectors https://www.printables.com/pl/model/488665-joints-for-fnaf-figures/files
The Deburr Tool is about 19mm in diameter in the front, and the handle itself is about 22mm in diameter. Remix from : 67961-deburr-tool-holder-entgrater-halter thanks to Sango
Has your Gaggia Classic ever splashed water up out of the drip tray? It's a pretty common problem. Common enough that on the original Gaggia Classics a splash guard plate was placed above the drip tray, below the grate. Its job was to…
Frontgewicht zum Anstecken an Bruder Traktoren.
Aufbewahrung Box für ein Entgratungs Tool. (MEISTERGRIFF) 2xM3x30mm 2xM3x40mm Magnet 10x3mm / 10x2mm
Model requested by u/Maximum-Difficulty17 on reddit - https://redd.it/175spq0 SVG converted from original wallpaper by u/CopperAtol095 on reddit - https://redd.it/s75n2s
Hier ist ein Halter für den Parkside Handentgrater zur Montage an der Werkzeugwand. Here is a holder for the Parkside hand deburrer for mounting on the tool wall.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These are modular containers that fit in Tactix/Montgomery/Keji brand 12 compartment storage boxes. The containers can be easily moved between boxes and rearranged to make any combination of storage sizes. They are designed to fit within…
Watch out! Monty has broken out of his green room and is ready to shred! This is a detailed, fan-art figurine of Montgomery Gator from FNAF: Security Breach . This model is provided as a single-color STL, designed to be a perfect project…
I created this model in Tinker CAD for a replacement divider for a friend's lunchbox. It is the first model I have shared.
Keep your plants growing strong and upright with PlantGrip Stem Support Clips . Designed to gently secure young stems to support stakes, these lightweight clips provide stability while allowing natural growth and movement. The flexible…
Fits these cheap deburr tools from ebay. It has a lip, so it won't fall through. The Deburr Tool is about 19mm in diameter in the front, and the handle itself is about 22mm in diameter. Simple print. Printed in das filament blue pearl.…
Ich habe hier einen Adapter konstruiert für das Zusatzgewicht von dem Claas Disco 8550 C Plus Mähwerk. Eigtl ist dieses Gewicht für den kleinen Claas jaguar 900. Im Internet werden diese teilweise kostenlos verschenkt. Das Gewicht passt…
Falls bei euch auch der Entgrater gern mal ins Material tief rein drückt, habe ich diesen Adapter entworfen. Die Fase wird ca. 0,5mm. Eure Klinge sollte 3,15mm im Durchmesser haben. Es Passt bei Noga Klingen und nicht namenhaften Amazon…
Who doesn't know it, you have exactly one deburrer with replacement blades, the blades are where they should be, but the deburrer itself is nowhere to be found. I recently discovered a nice pocket screwdriver while browsing here on…
A figure holder is recommended if the figure is to stand
Deutsch: Der Filamentguide wird mit zwei M3x20 Schrauben am Druckkopf befestigt. Es stehen verschiedene Versionen des Filamentguide zur Verfügung: Die Standardversion ermöglicht das Einkleben eines 4mm PTFE-Schlauchs. Eine Version mit…
Durchmesser für Entgrater:19mm Taschenmaß für Ersatzklingen:65x12mm
I wanted to attach the beginning of a PTFE tube onto a 17mm thick storage-shelf. Specifically for the purpose of an open-loop MMU buffer. I used this part together with my own design of a horizontal-filament guide for the…
IKEA Skadis Holder / Halter for Ruko deburring tool / Entgrater
Top stands for the new Universal Auto-Rewind Spool Holder by VincentGroenhuis to use with Prusa i3 Mk3. You only need to print the two stands, all the other pieces are used from the original design!. Feel free to make comments and…
Gem art (a.k.a. diamond painting) is a new hobby similar to paint-by-numbers that uses shiny faceted "gems" to create the artwork. My girlfriend recently got into this hobby in a big way, but finding a frame that works well for the gem…
This practical 3D-printed holder is designed to securely store a deburring tool along with up to 10 replacement blades. It fits perfectly onto the IKEA Skådis pegboard system, helping you keep your workspace tidy and your tools easily…
This filamentguide works with a spoolholder placed at the left side of the printer. I needed to reduce the height of the system to plaace it in a rack
Hack job of https://www.thingiverse.com/thing:6658722 latch mechanism and https://www.printables.com/model/685785-filament-rack-for-400kg-rack-it-shelf-bunnings shelf for 16mm rods. Fits both Pinnacle/Montgomery shelves Category:…
Die Ersatzkappen entsprechen nicht genau den orig. Kappen der Fa. Kettler. Jedoch haben sie eine hervorragende Passform. Leider sind die “Füße” vorn und hinten unterschiedlich, so, dass 2 Dateien erstellt und gedruckt werden müssen.…
Ein einfacher Halter für das allseits beliebte Deburring/Entgrater-Werkzeug. Für die Aufhängung verwendet man am besten den hier: https://www.printables.com/de/model/323748-skadis-universal-hook
This parts are detail for FCX18 K10 frontgrill. Look at picture of the positioning. Parts will be print with a 0.2 mm nozzle. Parts must be glued in the original grill.
Dies ist eine Kappe für den SILVERLINE Handentgrater. In der Werkzeugkiste könnte man sich ansonsten an der Klinge verletzen. An die Linkshänder (wie ich): Leider ist das entgraten nur schön, wenn man den Handentgrater auch in die rechte…
avantgardey Japanese Doll ningyo [アバンギャルディ人形] Best to print upside to use less support and use a brim. Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: No Supports: Yes Resolution: 200 Filament: Esun PLA…
Skadis Entgrater Halterung für Durchmesser bis 24mm
Adaptation of Prusa'sFilament Guide accessory, adjusted to fit the 2kg-Spoolholder
WHY? WHAT? This is the divider for the Bentgo Box Kids Lunchbox. There is another model for the non-kids version of the BentGo Box, on this site, but it will not fit the kids version. Our original is lost. So, I designed this one and…
You need to drill a 7mm hole for the Filamentguide to passthrough.
Halterung für den Entgrater Meistergriff am IKEA Skadis System. Es gib schon einige aber die halten den Entgrater alle senkrecht. Deshalb neigt sich bei dieser Halterung der Entgrater leicht nach vorne. So kann er besser entnommen und…
I wanted to use the original Prusa MK4 Filamentguide as a standalone version since i detached the spools from the printer. This adapter allows you to simply connect the original filamentguide. Technical Data: for using the original prusa…
Rain Collector / Downpipe Diverter for Biohort AvantGarde Garden Sheds & Garantia Rain Barrel Hose I modified the excellent design from varnerrants https://www.thingiverse.com/thing:2965677 to fit the Biohort Avantgarde downspout and can…
The Montgomery 15 sailboat mast has a pre-feeder gate for inserting the mainsail slugs into the mast slot. When the mainsail is dropped, without a mast slot stopper or a mast gate, the slugs will fall out of the pre-feeder slot. If you…
Bottom picatinny rail mod for the barrel shroud + frontgrip (Boom Grip) for the bolt-action Multi-Tool Barrel clamps (for 16mm aluminium barrels) to install the barrel picatinny rail from the top, again at the bottom of the barrel shroud,…
Sony cameras feature a larger mic holder than most shotgun microphones, so an adapter is needed to keep your mic securely in place. Material options: PLA or PETG, with TPU recommended for the best fit and grip Two versions included: RODE…
Bring sophisticated style and plush comfort to your miniature interiors with this 3D printable STL model of the Roche Bobois MONTGOLFIERE Armchair. This luxury furniture replica is perfect for high-end dollhouses, dioramas, or any display…
Hole designed for 12mm x 2mm magnet. PLA printing and hand painting Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 Infill: 20% Category: Office
it is a wonderful thing when you wanna put more paint in the tank of the gun, and when your not useing it, it also look little more nice on the table. I made it with PLA / 10%infill . I made it solid in the cylinder
German: (english below) Diese 3D-gedruckte HSW-Halterung wurde zur Aufnahme eines Handentgraters mit einem Griffdurchmesser von 13 mm entwickelt. Zusätzlich verfügt sie über ein integriertes Aufbewahrungsfach für bis zu 10 Ersatzklingen.…
I got tired of the spool unwinding whenever the gantry moved to the top for homing, and having to wind it manually to stop the filament from despooling down the side. I created this filament guide to make sure it doesn't happen - so far…
Bunnings have excellent 12 compartment containers for low cost, however small things can slide underneath the removable inserts. This quick to print insert prevents this from occurring and allows easy removal of the parts. Fits into these…
Hab mir für meine Weithalsflaschen Adapterringe gemacht um sie als Trommeln zum Entgraten verwenden zu können. Octopus 5X 2500 ml Weithalsflaschen mit Schraubverschluß, Chemiekalienflaschen, Laborflaschen mit Deckel als…
the filament guide is simply attached to the frame with the existing screws the recording is for an M10 push fitting
Halter für Besen Schaufel oder ähnlichem am Frontgewicht
Halterung für Noga Handentgrater, Noga Dreikantschaber Schaber, Noga Senker, Automatik Körner, Rico-Marker HM-Reissnadel Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix…
Joseph Lefevre Wetumpka High School Team 0625 Montgomery HUB - South’s BEST I first looked at how a real heart looks and how the heart functions. I also looked at bridge to transplant hearts that are already made and I used them to give…
Deburrer/Entgrater Case whit 2 slots for Blades
NEW: Version 3.0 The new version fixes an issue that randomly might happen, that while the 3d-printhead travels the z-axis the filament guide crane+hook flip back behind the spool. This usually only happens at the beginning of a print if…
I have created a holder for the runout sensor from creality which is attached to the extruder. In addition, a filament guide is attached in front of the sensor, which requires a 608 ZZ ball bearing. The holder has been in use on my Ender…
IKEA Skadis Halter für Entgratet
Rear handles can be adjusted in height. But they can be broken because there's thin connection inside. This is a simple replacement part. You need M6 bolt 25 mm. If you have longer bolt, you should cut it or update model in .scad file.…
original 5015-Fan holder https://www.thingiverse.com/thing:5035579 I remixed the fan-holder to have better cooling because my bltouch was in the way. So I redesigned a new Cover with a filament guide and a bltouch-holder. I am happy with…
English: Since I have mounted the spool of my prusa i3 clone to the wooden plate, the filament has to be guided upwards to the extruder. Thats why I designed this movable filament guide. sure it looks a little bit exaggerated, but I like…
Classic "X-Ray Vision" Magic Trick (Röntgendose) This is a simple, 3D-printable set of containers to perform the classic "X-Ray Vision" magic trick. With these props and a standard game die (up to 16mm) you can perform a fun mind-reading…
Sometimes you need to guide the filamentpath or the reverse bowden - print some normal and some mirrored and you can guide the filemant or reverse bowden as you want, .3 is perfectly enough and a real quick print
Holder for Orbiter 1.5 with integrated FS. Courtesy of : https://github.com/VoronDesign/VoronUsers/blob/master/printer_mods/spacelab2021/Orbiter-Clockwork/ and…
Handheld Adaptor for RODE VideoMic GO II/NTG - 40 mm diameter Needed: 3.5mm Male to 3.5mm Male Straight to Angle flat Cable (Ex.: https://www.alza.cz/ugreen-3-5mm-male-to-3-5mm-male-straight-to-angle-flat-cable-1m-black-d6632529.htm )
ein weiterer nicht schöner aber nützlicher Remix für den Ender 2 Pro
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Hi, there Since my printer got a nice and huge housing, I needed a filament guide. The search on Thingiverse gave a thousands of versions, but all of them were for a specific printer, a specific case or just over engineered. So I use my…
Print Prusametne Pla 0,4n 0,28mm draft fast printing in 13 minutes 5% infill
Wheelchair cupholder for foldable Ottobock Avantgarde from 2024. Keeping clear of the footrest mount was the major challenge on this one. This print is in diamond red Overture ASA, 50% infill, connected with M3x16 bolts and locking nuts.…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Ein einfachjer Halter z.B. für Handentgrater von Gratec Typ EL1200
Bunnings have excellent 8 compartment containers for low cost, however sometimes each compartment is just a little too large. These inserts allow you to easily remove pieces from the container and also increase the number of compartments…
Additional Parts 5x V6 Heatsink Collets 4x Threaded Inserts M3 x 3,5 2x Screws M3 x 6 for filamentguide 1-2 and 3-4 2x Screws M3 x 8 for filamenguide 5 Changing the Installation Location of the Advanced Filtration System. The PTFE tube is…
Le cadre ainsi que le panier sont à coller ensemble. Le ballon et ses 123 coté aussi. Ne coller pas le ballon au cadre gris sinon vous ne pouvez plus sortir la base à visser!
Looked around and couldn't find any files for these series of interlocking bases from Bunnings (https://www.bunnings.com.au/montgomery-grey-interlocking-60-drawer-organiser_p0338283 or…
If you want to attach additional stuff on the cable- and filamentguide, you need additional clips. Here you can now easily create your own clips. I used them to attach an additional cable for an LED light gantry.
This coupling part is used to safely guide the filament for the MMU2S from one level to the next, where the printer is located. The holes are 9.5mm in diameter and so PC4 M10 couplings fit perfectly. The part is intended for a material…
Beinauflagehaken um diese am Stuhl aufzuhängen, sofern man an der Hecktüre eine Halterung für den Stuhl selbst hat. Man kann dann wenn der Stuhl zusammengeklappt aufgehängt ist die Beinauflage in den Querprofilen des Stuhls aufhängen.…
Es handelt sich um einen Stand für einen Rundentgrater mit Aufbewahrung für Ersatzklingen
Remix'd this to fit my Back Forty charger. My charger was slightly larger than the original Dr. Dabber from FunctionalPrintGuy's case. Used Blender to widen the area for charging storage area to fit Back Forty brand. Print with the…
Filamentguide for Anycubic I3 Mega S
This is a 3d rendering of the Clan Montgomery crest. A lady dressed in ancient apparel Azure holding in her dexter hand an anchor and in her sinister hand the head of a savage couped suspended by the hair all Proper. Print Settings…
Wie auf den Bildern zu sehen ist, habe ich den MK4 in einem IKEA-Schrank untergebracht. Da die Höhe nicht für den originalen Filamenthalter ausreicht, habe ich zwei Halterungen an den Seiten angebracht. Vorher war das der Platz des MKS3+,…
Just to horse around. Real weapon disclaimer: Please adhear to your local laws when printing this. Do not use it with the short, normal or long version of the VP9/SFP9. Only the Match variant is long enough to not put your fingers in real…
Alternatively, I have created another grip “H&K 416 - Angled Fore Grip” https://www.printables.com/model/1395377-hk-416-angled-fore-grip Material: ABS (Enclosure might help) Layer thickness: 0.3mm Nozzle Temp.: 240-250 °C Heatbed: 90-100…
A Roller for the use with dryboxes or similar wich are placed behind the printer. i used a 40/30/7 mm bearing. The roller has an outer diameter of 50 mm, 7mm thick. alter it according to the bearings available
passend für: https://www.amazon.de/gp/product/B00200DNNO/ref=oh\_aui\_detailpage\_o06\_s00?ie=UTF8&psc=1 Category: Other
Die Halterung kann aus jedem beliebigen Filament gedruckt werden und sollte große genug für die gängigsten Handentgrater und Senker sein. Ihr braucht nur eine DIN ISO 4762 M6x12 Schraube und einen Nutenstein um es an einem 3030 Alu-Profil…
It is very hard to remove broken bearings from the front wheel coupler. Original aluminum part is hard to get fast. This is printable body of the connection. You cannot set wheel's angle like in original one. You need 8x50 mm bolt and two…
Simple filamentguide. The hole fits a 4mm ptfe-tube (verry snug!) or can be used without the tube.
Filamentguid with runoutsensor. Remix from: https://www.thingiverse.com/fatihmazi I elavetd Filamenttunnel to match the hight of my extruder: https://www.amazon.de/gp/product/B07WV653KW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Now…
This a simple filament guide for MK3(S) printers. It has been designed with OpenSCAD using the NopSCADlib . This design is maintained at GitHub .
Otto Bock break handle replacement. Print in TPU/TPE with 10% rectilinear infill.
100% infill use a brim for security 0.2 layer height filament: Hatchbox PLA black
![avantgardey Japanese Doll ningyo [アバンギャルディ人形]](https://media.printables.com/media/prints/842106/images/6484120_de7444b0-c5b4-44ba-a65d-25f224cbf78d_d8b1b5fc-09b3-4885-9694-2a96d27590c7/large_display_c5546ada-4418-4a90-b253-9659051415a7_842106.png)
![Standalone-Adapter [for original MK4 Filamentguide]](https://media.printables.com/media/prints/641003/images/5579511_a746e681-aaa3-4c09-a41c-c48c3bb88147_fe52aa42-c279-4cc5-b09a-a44f3d38129f/20240107_182324.jpg)
