29 models
UPDATE 2025: 38mm hoses are now supported, but I have released here on Cults3D I am still using the same part printed in PETG in 2023! This has stood the test of time but now my nozzle has failed, so here is a new model to repair the…
A retaining clip that allows the hose to be neatly held in place when wrapped around the machine. Suitable for Henry, Hetty, George, Charles, Harry and James, and similar members of the numatic family.
I created the Henry replacement nut (see here) out of necessity, and now I am doing the same with the other end of the hose! This is designed to work with the standard hoses Numatic supply (32mm), and standard poles and accessories. In…
The nozzle of my Numatic Hetty had a tear in it and was on its way to become unusable. I couldn't find a replacement part on Thingiverse, and Numatic only sells the whole hose. I designed this replacement part and it is a drop in…
Numatic Henry Vacuum Cleaner Tool Holder which clips to the rim around the top of the vacuum cleaner. Designed using Blender, printed using 0.28mm Layer Height, 25% infill using PETG. No supports needed.
This 32mm Ø and 150mm long tube acts as a connector for the different Numatic tools, to directly connect to Henry's hose. One is part of the package, but I needed a second one, so upholstry tool and soft dust brush each have one, making a…
cap for Numatic Henry 100mm hose adapter. Designed with 0.5mm tolerance - please let me know if this thing prints and works ok and what printer you have used. Category: DIY
This is a very simple, easy-print smooth floor nozzle I put together for my Numatic “Henry” vacuum cleaner. I was unhappy with the original nozzle because it had a tendency for my wife's long hair to become tangled in the brush, and on…
Attach a Numatic Henry 32mm vacuum hose to your dust extractor's 100mm inlet. Instructions 100mm piece develops a lot of tension - my bent a bit out of shape during printing. Could be improved by adding cut-outs, but it's working ok, so I…
A replica Henry Numatic hose connector 31mm ends with a 32 mm centre. Perfect for fitting the extra tools. I printed it at an angle for extra strength with minimal supports.
A Thinner nozze to attach to your numatic, henry, hetty hoover.
Adaptor to connect a Numatic Henry Vacuum Cleaner Hose to the vacuum cleaner port on a Mac Allister ¼ Sheet Sander (MSSS220).
Very basic Numatic Henry vacuum tube adapter to use Miele Floorheads, print with 3 wall loops and gyroid 15% for best results.
An adapter I designed to fit my Numatic vacuum to my Bosch saw. My print was a bit too tight so I added two slight tapers. May still require a bit of sanding, but a tight fit is desirable of course. Make sure to print it vertically and…
If your Numatic vacuum cleaner has a tube clip, you can print this to have the tube always stand upright against the wall. Prints flat against the bed with no supports. I coupled this with a gardening tool handle grip at the top of the…
Sometimes the easiest designs just do wonder :-) Our Numatic Henry mostly equipped with the flat “Freeflo Floor Brush”; however, the small rolls wore down. These exchange rolls are: slightly wider and larger, but still fit perfectly in…
A small adapter that clips onto the Bosch dust collection tube. I have increased the degrees of revolution since my own print. Your print should clip on tighter. The bypass is intentional because the hole in the original tube is so small…
Replacement Part for Henry Numatic fits perfectly, original brush Supports 4 walls infill default outer brim
This is a clip on counter part to support the following clamp on tube parking bracket: https://www.thingiverse.com/thing:5324156
I wanted to put the Henry Vacuum cleaner on a shelf in the garage, and was concerned that when moving items about there would be a possibility of it landing on the floor (or a car)! I created these "wheel-cuffs" for the front two caster…
Henry hoover handle. Prints well with Abs or Pla on a 0.4mm nozzle. Support : Yes Layer Height : 0.2mm Infill : 100% Walls : 3mm Fits the standard red Henry and pink Henrietta. May fit others.
After a while the high efficient floor nozzles (also called free-flow) floor nozzles of the Numatic Henry (HRV-160, HRV-170 and so on) fall off. The wheel itself is pretty fine, but there is a little shim inside which wears down easily. I…
Replacement clips for asco numatics 651/652/653 Series wall mountable system no supports needed Print with 3 walls and 25%+ infill, Use a durable plastic such as PETG or ABS
Clip-on wire guide for the Numatic NVH180-2 and other P180 James models that do not have this feature yet. You have to unscrew the handle to mount (clip-on) the guide(s). printer settings: - Layer height: 0.1 - Infill: 25% - Speed: 50mm/s
Henry hoover handle. Prints well with Abs or Pla on a 0.4mm nozzle. Support : Yes Layer Height : 0.2mm Infill : 100% Walls : 3mm Fits the standard red Henry and pink Henrietta. May fit others.
I used openscad to import the model and cut of some of the edge, made a new shape to fit it to my hose. It printed well without supports You can print the stl file, but if you want to modify it for a different type of hose, you will need…
I have printed another with ABS and that is the one on my printer since 2017. This was one of my first prints.
is a pneumatic ball valve engine like the ones on old airhogs planes
