Numatic Henry Hoover Vacuum Hose Collar Nut
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.20 – €1.46 net (excluding VAT)
For file: Henry Hose Collar Inner v0.3_0.4n_0.2mm_PLA_MK3S_1h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.33 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.36 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Both inner and outer parts to fit the range of Numatic vacuum cleaners with 32mm hoses.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 416
- Makes
- 4
- Views
- 1,757
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 2025:
38mm hoses are now supported, but I have released here on Cults3D
I am still using the same part printed in PETG in 2023! This has stood the test of time but now my nozzle has failed, so here is a new model to repair the other end!
--
If you've experienced the annoyance of your Henry vacuum hose pulling off of the body of the machine, you'll know what it's like to have a split collar nut!
This design replaces both the inner and the outer part, but both are designed to work with OEM parts, so you can just print whichever part you need. Both do work together very well with less friction than the original.
I have tried with both PLA and PETG, but it was my first time with PETG so I had some fine stringing. PLA does work great though for both parts!
Print either .20 or .30 layer height, and don't enable supports. Print with threaded sides down.
The hose should be put through the outer first, then threaded backwards (left-threaded) into the inner until it stops. Then attach the outer nut to the body of the vacuum.
Enjoy your repaired machine!