44 models
A stylish fidget spinner designed for performing tricks by spinning it around your fingers—an engaging way to entertain even your most imaginative companion! Simply print a chain to your desired length, attach the Ring and End pieces, and…
this is a pair of nunchucks i made about 7 months before i posted this but has some over hang but with the well tested printer it will be fine if you dont want over hang you can find a newer version on my profile
i was bored so i designed this
## Design Concept The palm nunchucks are designed for stress relief and casual fidgeting. The compact size allows for easy handling and is suitable for quick routines while multitasking or relaxing. ## Uses This fidget toy is perfect for…
Nunchucks for event costumes like Halloween. For stronger chains and handles use a higher infill density. I used a 50% and my print is strong enough to smash cardboard boxes without taking damage. Model starts off large. Change sizing to…
Here's my version of Lego Ninjago Nunchucks of Lightning that's. They're scaled to fit a persons hand. On version is solid, one version has holes for batteries and leds. Be sure to post a make and check out my other models If you like my…
Here's my version of Mikey' nunchucks from TMNT. Print out two of the handles and 3 of the chain links. files split and fit a .5 in rod. Category: Props
This is a very basic print-in-place design for a pair of nunchucks. Please feel free to remix and improve on it! Would love to see what people come up with.
Collapsible Nunchucks! The collapsible handles thread into the chain part. The chain prints flat with the flats own, and the handles print upright with the threads up.
Ya'll wanted it (alot) so here it is GUNCHUCKS!! Print with supports at least. With good bed adhesion, you won't need a brim. POST YOUR MAKES!! Be sure to leave a like so I can feel better about myself and make the front page! Print…
This is a three part retractable nunchuck. It was made to be printed from the beginner printer that I got which has limited print space (10cmx12cmx10cm). The chains are remixed from RobSoundtrack's Working Nunchaku…
Simple Chain Nunchucks Thanks for your support! We need your support as fresh air.
Prop nunchucks I made for my kid's Halloween costume. I printed these with lots of infill to give just a bit of heft and keep them from splitting along the layer lines. String them with paracord. This how-to video was the best I found:…
This is a Modular Nunchuck. Print any size attachments and adjust the Nunchuck size. NOTE: First time screwing on the attachments could be a bit stiff. After some time it will get easier to screw on. This print is pre-sliced with…
I am waiting for filament to arrive so I haven't tried to print these yet. If you make one please post the make and let me know what you think! I will add my print when my supplies arrive.
TAKES A 1/2 IN ROD SPLIT FOR PRINTING. BASED OFF THE ONES THAT COME WITH JAY ZX LEGACY. JUMP UP, KICK BACK, WHIP AROUND AND SPIN Category: Props
This 3D model represents a set of prop nunchucks , created specifically for display, cosplay, photography, or decorative purposes . The design captures the traditional look of nunchucks while remaining static and non-functional for safe…
Printed in three pieces, and no need for supports. You will need to print two of the nunchuck sticks. There is a dowel so you can put them together. You may need to use a mallet and probably won't need glue. These were made by my brother…
This model is compatible with the lego system.
Do you have to fight ninjas? Do you also need to sign legal documents? Well this model is for you. There is a long and short version. The pen holder is the same size on both. These are the Pens I used. You can also find them at dollar…
Allows you to mount 4 Wii Remotes and 4 Nunchucks on a Skadis board while saving more space than the individual modular version. I printed with 0.4mm nozzle at 0.2 layer height 15% infill with tree supports which went well.
Zwei schöne NunChuks, bei der Punisher Version kann auch eine Schraube eingeführt werden und mit eine Ringmutter außerhalb abschließen.
Inspired by the WiiMotes of days past. This is my design entry in to the Printables: Remote Holders competition. I present to you the TV Remote Nunchucks. A super practical self defense tool (not really) and a great way to never lose your…
Print with brim and supports, once supports are removed they will be a pair of functioning nunchucks.
You might need to rotate the print, if you scale it up 120%
I made this little wall mount for my Nintendo Wii Nunchucks. The original version can be mounted with VHB tape, and there's also a version with holes for the kind of screws that usually come with drywall anchors! Also included is just the…
Custom Foam Nunchuck Grips – Extended Comfort & Control If your foam nunchucks don’t have full coverage at the top, these custom 3D-printed grips are the perfect solution! Designed to seamlessly extend the foam grip, they improve…
Basic nunchucks that i made in onshape how to assemble (v2) only print the two models v2 part one and part two screw them together until snug now you have some nunchucks!!! (note v2 is made in favor of a smaller print area, that is why it…
This project was designed by Mark Li in collaboration with Casey Stengel. Link to Casey's page with our other office supply: https://www.printables.com/@CaseyStengel_2542632 About this project: Each nunchuck has a height of 10 cm and a…
Nunchucks that are split into 3 parts: the handles, the pins to connect the chain to the handles, and the chain.
Funchucks is a multi-purpose toy, it can be anything from nunchucks or a skipping rope to a dog toy! It's easy to print and can be done in less than a day, all you have to do is print two handles and two caps and connect them with a…
The wall mount is entirely my creation. I designed and printed it myself. The nunchucks are meant to be sized up to fit in the mount. The diameter of the handle is "2.4225" inches ON THE SHORT SIDE. The handle is NOT perfectly circular.…
A nuncheckulukmahuc for you're dummy 13. Whith three grips.
there are a few instructions for it to work properly: a nozzle >0.5 mm supports touching build plate scale to around 4x or more must be sliced
A model of the nunchucks of lightning based upon the design from the lego ninjago tv show. The download includes the original blender file, stl and obj files as well as an stl file of the nunchucks seperated into parts for 3D printing…
there are a few instructions for it to work properly: a nozzle >0.5 mm supports touching build plate scale to around 4x or more must be sliced
Basic nunchucks that i made in onshape how to assemble (v2) only print the two models v2 part one and part two screw them together until snug now you have some nunchucks!!! (note v2 is made in favor of a smaller print area, that is why it…
## Design Concept The palm nunchucks are designed for stress relief and casual fidgeting. The compact size allows for easy handling and is suitable for quick routines while multitasking or relaxing. ## Uses This fidget toy is perfect for…
This is a simple yet fun and cool model that I designed for fun. It is very fun and can provide countless hours of entertainment. It takes less than 8 grams of filament and takes about 30 minutes for the shorter version and an hour on the…
