23 models
these MKIISD shroud models will work on the MKII platform. but it haves some upgrades from the FGC9SD. what does the MKIISD update mean? the main update and why these are called MKIISD are that I took some improvements from the FGC9 SD…
More modern style "trapezoid" bell replacement for the stock Howard bell. Print Settings Printer Brand: Printrbot Printer: Printrbot Simple Metal Rafts: No Supports: No Resolution: .1
Blank Pilot and Plow pilot for USA Trains EMD SW2. Versions for Large scale and #1 couplers. Print Settings Rafts: No Supports: Yes Resolution: .1 Infill: 100
To simulate EMD Flexicoil 2 axle trucks. These are not sprung. The springs are printed for a more prototypical look. I highly recommend getting them printed in MJF Nylon 12 for greater durability. I use JawsTec https://www.jawstec.com/
Hood mounted air reservoirs for USA Trains 1:29 scale NW2 locomotive. The tanks are 16mm polystyrene test tubes. I measured 100mm from the open end and cut off the bottom. There is a bit of a taper hence the 2 different sized caps and…
this new 2022 series will have the option of a bolt on top rail. (yes, I have gotten those requests over the years) but the real reason I made it's that this shroud will soon also have a lower rail option. that is made possible by using…
Direct replacement for the stock part.
SF bolt checked: E1 needed to be updated to make it work with the SF bolt, this can been seen by the SF mark, older versions with out this mark will not work with a SF bolt! E2 already was compatible with the SF bolt so it's the same file…
More parts to make an NW2 look more SW. Multiple parts to facilitate smoothing the print lines by painting/sanding. Lights are sized for 3mm LED. Notes: My print bed is PEI so anything I print face down (like the marker blanks) will have…
I have updated it to a V2 model this will add 1 extra bolt hole so the rail is stronger -- these MKIISD shroud models will work on the MKII platform. but it haves some upgrades from the FGC9SD. what does the MKIISD update mean? the main…
A replacement for the USA Trains NW2 front grille. You will need to enlarge the existing opening. part a goes on the outside, then a bit of mesh (I used 20x20 stainless), parts b and c press fit from the inside. Print Settings Printer…
Upgraded my USA Trains NW2 with a larger fuel tank. Direct replacement for stock one. No cutting required. Added version for Visiton FRS 7 speaker facing up into the hood (my preferred install) Print Settings Printer Brand: Printrbot…
Nicer replacements for USA Trains NW2. Used a dremel with a cutoff wheel to cut out the the molded ones. Inserts are 20x20 stainless mesh. I've included a spacer to raise them up like the Canadian SW1200RS
Added a dynamic Brake housing to my USA Trains NW2 to make it look more like the SW1200's used on some logging railroads. The fan is from a USA trains GP30 (part #R22-471) Note: You will need to cut the model for this to fit.…
FGC9 Mini 1/6 scale TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you…
this are redesigned back caps for the FGC-68 (MKI/MKII) on the image is a FGC-6 model shown. so there is still a hole the remote line in these end caps like the other FGC-68 stocks options for all the other stock options look at this…
this have been updated with a new model to fix a error that I made… TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you…
I elongated your model to fit the base of a Kato NW2.
I have updated it to a V2 model this will add 1 extra bolt hole so the rail is stronger -- this is the shroud set is based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of…
this my latest shroud design and maybe even my last for the FGC lineup. but I have thought this before so who knows. the 2 piece design makes it possible to make it less bulky then the older designs. and the M-lok gives you a lot of…
shroud made for a minimal barrel length of 265mm
shroud made for a minimal barrel length of 220mm
SF bolt checked: E1 needed to be updated to make it work with the SF bolt, this can been seen by the SF mark, older versions with out this mark will not work with a SF bolt! E2 already was compatible with the SF bolt so it's the same file…
