30 models
This is a fitable remake of the Box for the Clas Ohlson article 69-9116, which is labeled with "Elko RS utenpåliggende nettverksuttak Cat 6". I've lost mine somewhere and didn't want to buy the whole product again, just to have the cover.…
Description This is a replacement for the handles of the Clas Ohlson kake carrier 44-4779. These handles easily brake and usually cannot be replaced - unless you have a 3d printer, of course. It's worth considering printing this in PETG…
Simple but AMS and dry-box friendly filament-clip for Clas Ohlson 1kg filament rolls. As shown in the pictures, they fit in those slots that are arranged along the outer perimeter of the roll. The picture with it on the outside is only to…
This is a replacement cap for the Clas Ohlson Exibel screen wall mount. The hook is on the underside of the arm and often breaks - ask me how I know. This model is almost a 100% replica of this part. Just remove the screw, remove the…
A filament shelf that uses the expandable rods and screws from Clas Ohlsons "Justerbar Skohylle I Metall" (44-3949) or Skohylla ställbar, metall if you are in Sweden. At 250 NOK/200 SEK it is a relatively cheap and quick way to get hold…
Simple and effective holder for your screwdrivers. Saves material but does use more screws than other designs might, but this also allows for the best customizability, as everyone will have a slightly differing set of drivers ;) Designed…
The Clas Ohlson ice stick mold ( https://www.clasohlson.com/fi/Jaapalamuotti-silikonia,-5-puikkoa,-noin-20-cm/p/44-5538-2 ) is handy but way too floppy. It's annoying, you get water all over the floor trying to fill it. So I made a tray…
Separator walls for drawers in the Clas Ohlson / Raaco parts cabinet / organizer cabinet, part no 31-2376, 31-2375 and others. Parametric, your own choice of colour and far cheaper than getting them from Clas Ohlson (currently about €5.50…
Different inserts for Clas Ohlson Cocraft line / system of assortment boxes and bins. They're really good value for the money, and the quality of the boxes are good. But the compartments in them are a bit big for smaller objects.…
This component is a new or updated version of a model for my “Skadis charge-wall project.” Some models now come in two versions - one with and one without engraved text - and, for models that need it, with or without a front split to make…
Few simple drawers for empty Clas Ohlson spools. Might also fit other spools, dimensions are as follows: - Inner diameter 100mm - Outter diameter 200mm - Spool inner “height” ~62mm You'll need 2pcs of M3 bolts (choose lenght as you…
This is a fitable remake of the Box for the Clas Ohlson article 69-9116, which is labeled with "Elko RS utenpåliggende nettverksuttak Cat 6". I've lost mine somewhere and didn't want to buy the whole product again, just to have the cover.…
Replacement base for a LED lamp bought at Clas Ohlson. It's probably just a rebrand, so similar lamps exist. The base hole is 12.5mm. Print instructions I printed with 4 perimeters, 20% cubic infill and it seems to work so far.
A simple desk mount that snaps onto [this]( https://www.clasohlson.com/no/6-veis-overspenningsvern-USB/p/36-7827 ) surge protector from Clas Ohlson. Apologies for the bad cable management, this is the first step towards getting it under…
Needed a tape holder for my clas ohlson pegboard so I adapted this great design: https://www.thingiverse.com/thing:3152263 Uses 8mm dowels but I uplodaded .step and .f3d files for easy editing too! https://ko-fi.com/aasikki
Link to the 3D model http://a360.co/2pal1MS Made for roles that has a rim of 3.8 mm. Category: 3D Printer Accessories
Needed a pegboard holder for my tape measure so I designed one. I uplodaded .step and .f3d files for easy editing too! https://ko-fi.com/aasikki
I created this to fix a misalignment issue due to the shape of my wardrobe doors when I installed a set of magnetic latches ( https://www.clasohlson.com/se/Magnetlås-10-pack/p/Pr211690000 ). They simply lower the piece that goes in…
Wall mount for Clas Ohlson laser measurement tool (HD400-2)
These two clips (one for the 5L box, article number 44-3000-5, and one for both 10L and 20L, articles 44-3000-10, 44-3000-20) make sure the boxes stay closed.
Wanted to make a dry box where everything could be sourced from Clas Ohlson. I included all of the files i designed myself in fusion360, but i did not really want to design a nipple for letting filament through, so i just grabbed one off…
A desktop screen holder and sensor holder for mounting to Clas Ohlson Coltech weather station, 36-7904.
Holds nozzles on a Clas Ohlson pegboard (12mm spaced holes, https://www.clasohlson.com/no/Verktoytavle-med-kroker/p/40-7251 ). The FreeCad file is parametric, so you can alter the number of holes (and thus holder width), the size and…
I have found this to be more accurate than the round or rectangle hygrometers you can get from Amazon. After a while I got tired of having to constantly search the bottom of my drybox for it and designed a proper holder based on a good…
No support needed. Make it food safe PETG if you place food in it (nuts, crisp or whatever.)
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
Joiner/connector to connect multiple Clas Ohlson curtain rods together. For Clas Ohlson product: 41-4145-1. It's a tight fit and the model can be printed standing up on a smooth sheet.
The case came with just a few small compartments. As I use one of these for small electronics I needed more of the smallest case. This is for the size 45x45 mm, but the actual size of the box is a bit different. Bottom is 45x45mm and the…
Repwinder spacer and end cap for the 1kg spools with open sides of PLA from Clas Ohlson. Se picture for details.
Repwinder spacer and end cap for the 1kg spools with closed sides of PLA from Clas Ohlson. Se picture for details.
