Counting matching models…
I don't like to throw all of my utensils into one big container, so I've designed this internal divider for the Ikea ORDNING utensils holder. It's designed to snap into place (the upper part has a lip that grips the edge). There's also a…
Ein Trenner für den Ikea Ordning Besteckständer mit 13,5cm Höhe in 3 Ausführungen. Unterteilung in 2, 3 oder 4 Fächer. Inspiriert wurde ich durch: https://www.printables.com/de/model/10226-divider-for-ikea-ordning-utensils-holder Ich habe…
Update V4: mise à jour pour tenir en une seule pièce, il n'y a plus besoin des clips pour tenir l'égouttoir vertical. Les crochets ont été agrandis pour mieux tenir accrochés. Imprimé en PETG avec buse 0,8mm, hauteur de couche 0,4mm,…
I was sick of having cutlery soaking in water so I made this riser. It's meant to work with ORDNING Stainless Steel Cutlery Stand and the EKIPERA plate. It prevents drying cutlery to come into contact with excess drain water. Edit feb…
This is one of my IKEA ORDNING collection models, take a look at the others below: IKEA ORDNING water collector base. Reuse the water ! Utensil cutlery drainer clamp hook for dish drainer. IKEA ORDNING. Folding dish drainer clamp hook,…
2 holes on edge are for thicker blades - 3mm . Others are the same - 2mm. Ikea link: https://www.ikea.com/us/en/p/ordning-utensil-holder-stainless-steel-30011832/ Put 3 layers on bottom. You can skip top layers to save some filament.…
Printed object in the pictures is a previous model with all the holes with the same size. Uploaded model has different sizes as shown in 4th picture. 0.3 layer height in the pictures.
Gives you 5 slots to separate your utensils/stuff. Snug fit.
Divided remix of Divider for Ikea ORDNING utensils holder with more (6) compartments instead of original model with 3 compartments.
I have an IKEA ORDNING utensil holder at home to dry the utensils, however, the included foot is way too short and there is always some water trapped under the holder, which over time becomes disgusting. So I made this simple foot for it,…
This is one of my IKEA ORDNING collection models, take a look at the others below: Utensil cutlery drainer clamp hook for dish drainer. IKEA ORDNING. Folding dish drainer clamp hook, for big pots - IKEA ORDNING ORDNING Dish drainer feet…
This is one of my IKEA ORDNING collection models, take a look at the others below: IKEA ORDNING water collector base. Reuse the water ! Folding dish drainer clamp hook, for big pots - IKEA ORDNING ORDNING Dish drainer feet for VALVARDAD…
I made a wider base to improve stability with heavier cutlery, than it has a draining pound and a side opening where you can drain water without removing it every time and you can easily check the water level.
A quite simple but nevertheless usefull item. At least for me and hopefully for others as well. I'm surely not the first one using the IKEA ORDNING Utensil Holder as a garbage can in my bathroom. The problem was, that the garbage bags I…
This is an upgrade for the well known (and sold) Ikea Ordning. The bottom part is to collect the dripping water, so you can place it beside your sink to free space for other things on water protected areas. The other 2 parts should…
Sé parte de la revolución IKEA hack y comparte tus proyectos con el mundo. ¡Maximiza tu ORDNING con este diseño 3D todo en uno! Di adiós a los charcos y a los estropajos desparramados. Este soporte y escurridor personalizado para el…
Hook for a kitchen stick for ikea Ordning Print instructions Category: Kitchen & Dining Summary Hook for a kitchen stick for ikea Ordning
I have a couple of these around my kitchen (who doesn't?), and one of them is used for silverware. I got tired of poking around forks and knives to find a teaspoon, so I made this. It has four sections. The center section is raised so you…
A small little but stable hook for the IKEA Ordning cutlery dryer. Print with supports and the hook nose facing the built plate. Category: Kitchen & Dining
Print instruction same as original I remixed from. Remix was done via Fusion360. Pictures are from v2, v3 has been widened further.
This is one of my IKEA ORDNING collection models, take a look at the others below: IKEA ORDNING water collector base. Reuse the water ! Utensil cutlery drainer clamp hook for dish drainer. IKEA ORDNING. ORDNING Dish drainer feet for…
Print in two parpartst mirrored and attached with zip-tie.
Hate when your teaspoons get stuck between your cutlery in the IKEA ORDNING drying tool? Not anymore! Spoon Saver will protect your loved and neglected teaspoons and treat them the way they always deserved. designed on 12 cm diameter IKEA…
I made at divider for utensilies holder IKEA Ordning 18 cm. https://www.ikea.com/dk/da/p/ordning-stativ-til-kokkenredskaber
Fit in place using glue gun - this will help with sound dampening Printing instructions: PETG will last longer recommended layer height max. 0,20mm print with orientation as shown in pictures, brim/supports not needed
Little Drain Design for the Ordning utensil Holder. Keeps your Counter from getting all moist
This addon for the IKEA ORDNING Cutlery Stand is designed to help organize your silverware, There are two sections of different heights for smaller cutlery, like coffee spoons (see photo for reference), but please note the following:…
Base for Ikea Ordning colander. You can save some money instead of buying the original base. ---- Please leave a rating or comment if you like the print! Want to sell my prints? Commercial License is available here:…
*This was made by my brother. This elevates your ORDNING utensil holder off the ground and allows water to drain better. You can use the plate underneath to collect the water if you need.
A top cap for the IKEA ORDNING that will allow it to hold knifes.
Today’s design makes the classic IKEA ORDNING utensil holder even better! I created a two-part separator system that interlocks to form a cross inside the container. The result: smaller sections that keep your utensils neatly divided and…
适配ikea ordning(老款--锥形结构)的挂墙配件，使其可以垂直固定在墙面。 Adapted to ikea ordning (old style - tapered structure) wall-mounting accessories, so that it can be fixed vertically on the wall.
Tea/coffee spoon holder for Ikea ORDNING for easier reach of shorter cutlery. Printed using PETG with a 0.4mm nozzle.
Because spoons always get lost in the dish drying rack, I created mix of the original midel but with room for spoons
This dish rack is nice to look at, but it has the flaw that all the water that drips from it just goes straight to the countertop. Even cheaper dishracks will have some sort of water pan to catch the drippings. This mod raises the…
We used this divider printed from PLA for more then a year, but it accidentally ended up in the dishwasher and got deformed a lot. My only issue with it was the lack of a drainage hole in the centre, so I've added that before re printing…
I made this stand for the IKEA Ordning Utensil rack, because I find when its just sitting directly on the bench, water pools up underneath and backs up into the utensils in the rack. This stand lifts it up and will allow water to fully…
I printed in white PETG 0.6mm nozzle and variable layer height.
Print this model with supports enabled. I've printed it upright with a 0.6mm nozzle. It might print upside down, too, After removing the supports, you can place the holder on the dish drainer and turn it 90 degrees (Z) to secure it…
I made this top latch for ikea ORDNING so that my knives dont get dull when put in there to dry and so that I dont have to fish out small spoons out of the bottom of the basket anymore. And neither do you! Works with ikea spoons and…
Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30 Filament brand: Add-North E-PLA Filament color: Yellow Filament material: PLA
A simple 3D-printable insert for the IKEA ORDNING stainless steel utensil holder, designed to keep cutlery separated and organized. IKEA ORDNING Cutlery Separator Make better use of your IKEA ORDNING stainless steel utensil holder with…
Base for ordning recipient, ekipera tray fits under.
Today’s design makes the classic IKEA ORDNING utensil holder even better! I created a two-part separator system that interlocks to form a cross inside the container. The result: smaller sections that keep your utensils neatly divided and…
Tea/coffee spoon holder for Ikea ORDNING for easier reach of shorter cutlery. Printed using PETG with a 0.4mm nozzle.
I have 6 knives and 2 scissors in the kitchen and have been struggling to use and store them functionally and in a compact way. I designed a custom lid for Ikea ORDNING utensil rack to keep all of those organized, functional, and compact.…
From beginning to make a model for 4-section divider for IKEA ORDNING Utensil Holder , I ended up to made 4 different types of dividers ranging from 2-section to 4-section configurations. These could accommodate different types of cutlery…
