370 models
Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Why 0.3 Nm? source: The right Torque for your Prusa XL Nextruder Nozzle by INVESTEGATE Printing open the PrusaSlicer file as project print the objects using PETG (DON'T throw the purge, may it is needed later). Object torque-case-B is…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
This is a razor stand for the Henson Shaving AL13 safety razor. Includes a torque center that makes blades changes safer. Instead of holding on to the razor head with wet fingers, simple put the head of the razor in the torque center and…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
REMEMBER: do not leave torque wrench in preload state. Always unscrew cap to 0 position or below when not in use. It is usual practice using torque wrenches. UPDATE 2020-04-19 added more constant and variable thicknes springs. As most of…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Disposable Grip designed to fit the CRITICAL TORQUE PEN MACHINE . See article below for sanitization recommendations: https://help.prusa3d.com/article/prusa-face-shield-disinfection_125457 Recommended Print Settings: PETG 0.2mm layers 3…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
I designed this tool to calibrate the genial "Torque Wrench Handles from 1.0Nm up to 3.0Nm" There is such a tool showed on the fotos, but no file for it added.…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Wallmount for HAZET Torquetool / Wandhalterung für Drehmomentschlüssel Parametric design
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
This knob replaces the bed cleats, adjustable torque knob. This is only the model for the knob itself not the torque spring. Compatible with Toyota Tacoma 2005-2021 models.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Gridfinity bin to hold a nozzle torque wrench and extra sockets. The torque wrench I used is from Triangle Engineering. Although it is a pretty generic tool and I’m sure there are similar ones out there that would fit as well. This model…
Print approx. €3.53–€4.32 excl. taxPreliminary estimate for one variant
A thumbnut for M5 nuts. I desegned it in order to be used for broken magic arm. The magic arm is used in cinematography for mounting camera, light and sound gear to complicated positions. It is common for the fixing nut to brake. This is…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
You can print the bottom part with PLA, but the top part with PETG. The supports are only needed for the top part. I made this model: https://grabcad.com/library/nozzle-preset-torque-wrench-1 For this product:…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
ATTENTION!! Always keep in mind that the generate torque will slightly varies depending on the used filament brand. The original piece was printed with Prusament PETG Galaxy Black, so a filament with similar or better quality should…
Vague for the next week im leaving for the outback in a few hrs. Requires a 65mm length .3mm thick brass strip 12mm wide and a way to drill a 3mm hole in it. Build Guide WIP sorry, but at least its here this time! Im back the 25th at the…
Insert your standard hex nut or screw, press-fit ⭐ Fits standard hex nuts from M6 to M12 -Designed with deep finger grooves and certain shape for maximum torque and grip -Optimized for hand tightening in tool-free applications Print…
29T pinion compatible with the Kyosho Fazer FZ02 RC touring car. Provides additional torque/acceleration over stock 32T pinion, at the expense of some top speed. Pitch is 48DP (48 teeth per inch of diameter) and should be compatible with…
3D Printed Ratcheting Wrench with 30Nm max. torque A couple of years ago NASA released a 3D Printable wrench that they sent to the ISS and printed there. I have seen this model quite a few times floating around the internets and got…
Hello Makers, This is a fully 3D-printable torque wrench for the Prusa XL Nextruder. No extra hardware required. This is a Remix. The Original is from @ Perinski <3 I created this remix because I didn't have any magnets on hand, and…
This is a 3D printed torque wrench for tightening your nozzle and prevent overtightening, stripping the thread or damaging the head break. The torque at which the wrench slips depends on the the material of the rotor so it is recommend to…
Hello Makers, I've remixed a 3D-printable torque wrench. There are many different inserts with varying torque levels. 100% printable. No hardware required. The Original is from @ Perinski <3 I created this remix because I didn't have any…
Simple torque wrench holder for a hazet 5122-2 CT and others. The inner diameter is 23mm. The holder has a deepening on the back to make the wrench fit better and lies flat. I printed my holder with 4 perimeters and a little support on…
Pretty much a straight-up copy of the Newmen TC adapter because that's the simplest, most elegant solution that I've seen. In fact, the Newmen adapter is inexpensive and such a nice fix I'd suggest you just buy it from them and give them…
Rugged thumbnut that I used to repair my roof bike rack. It can be useful for other applications as well. Updates 2025-7-7 Release 2: M4 version added. Variants for standard nuts added. Print instructions You will need to pause the print…
This little adapter fits snugly against the three flats of the iFixit precision screwdriver handles (Polymer and Aluminum Bit Drivers and Marlin Fixed-Blade). By providing extra wings, higher torque can be achieved for really stubborn…
Using this rotor in G.design's model you can reach 2.5Nm of torque For the maximum accuracy use Prusament ASA (possibly galaxy black) and the provided 3mf files There's also a more conservative version (2.3Nm) usable with stiffer…
Tunable torque wrench There are many good printable fixed torque wrench design for nozzle changing but most of them depend on the characteristics of the filament used to print the parts. This version is my attempt to solve that problem.…
High-Torque T-Handle Pin Vise & Hand Drill (Modular System) Expand your 3D-printed tool collection with this heavy-duty, high-torque T-handle! This model is the latest addition to my Modular Tool ecosystem, designed specifically for tasks…
If your RockShox fork has the cutout for the “Torque Cap” hubs, but you have standard hubs, it can be tough to line up the front wheel with the thru-axle. Originally this could be fixed with the original design which had to be glued in…
Please support Hoopers channel if you have found it useful.
Fits 18s2p 21700 and 19s2p 21700 packs for the XR frame. Fits 21.7mm and 24mm Gland Hex Nuts Buy one here: https://www.atlowshop.com/product/vexr-19s-battery-box/ Use with our Bombproof Lid:…
This is a replacement for the plastic springs in the KiMe kinetic sculpture with constant force springs found in tape measure. All parts were printed in PLA 0.6mm nozzle and 0.36mm layer height. The Spring holder and Bottom part were…
Angle degree torque gauge for 1/2 inch spanner extension usually used to tighten cylinder head stretching bolts. It's a snug fit onto the ½ extension and the dial is sandwiched between the bottom ring pressed onto the upper hand piece. To…
As written above, I cut a straight ¼" hex slot in order to have the possibility of using the tool with a ¼" adaptor. I also cut a small hole on the scale side, so it can be used with a scale that pulls a thread, like a luggage scale,…
Multiboard Torque Wrench holder in two sizes. I removed the holes from the original model and added the multiboard pegs to the rear. Original model is 23mm internal width and fits my Craftsman 3/8" micro click torque wrench perfectly. I…
A tool to help you tighten your nozzle just enough to prevent leaks when changing nozzles. Original design: https://www.printables.com/model/242447-nozzle-torque-wrench This is a sleeker version of G.design's nozzle wrench. Includes a…
Propeller for RC fishing or normal RC boat, the propeller is high torque and also silent. The model is designed to be printed with ASA/ABS. Print with as many walls as possible. NO SUPPORTS. For 4mm driveshaft. Also have propeller guard…
Impression en PETG recommandé, remplissage 20%, pas de support
My hastily modeled version of the torque pro from hoopers beta. The real one is way better but 80$ is insane. Needs supports around the pulley.
Many parts of the motor are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS). Assembly steps and details are shown in the video. Any settings not specified are standard slicer settings. 0.2…
Prints fine upside down without any supports Tested in PLA but probably longer lasting in PETG because it snaps in This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of…
Same great internals with an extended handle for better grip
Gridfinity modules to hold a 3/8" torque wrench from Harbor Freight. Swap colors where the text starts for readable labels https://www.harborfreight.com/38-in-drive-5-80-ft-lb-click-torque-wrench-63880.html
Edit: while this mod makes the Olsson's wrench better, I found the usefulness of the Olsson's wrench questionable. It doesn't seem to apply enough torque when tightening the nozzle and since I started using it I experience a few filament…
This is a remix, because i did not have 9x5 magnets but 6x3. Also i changed the housing of the rotor to click in. This way it just hold in place, but can rotate as need. The 6x3 neodinium magnet hold the tool just fine. Print Settings…
This gridfinity bin, with the dimensions of 4 x 1 x 7U, stores the Canyon (german bicycle company) supplied torque wrench tool, and the supplied bit holder. The fit is more on the tight side. (For reference, the torque wrench was…
Support Fiche 7 broches pour remorque, j'ai créé cette pièce afin que la fiche de ma remorque ne traine plus par terre et je l'ai fixé sous la remorque pour qu'elle soit protégé des intempéries Imprimé en PETG sans supports
Prints fine upside down without any supports Tested in PLA but probably longer lasting in PETG because it snaps in This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of…
There are two versions of this model, normal and tight fit. The tight fit is extremely tight to the point I had to use pliers to get the socket out. The version shown in the photos is the tight fit.
This is a gear based off of and compatible with the standard K'nex gear. The mating surfaces of the gear are wider than the standard gear and the hub features reinforcing lugs that prevent the tan clip that acts as a key from slipping or…
UPDATE 2: two new stronger spring files added, to be tested spring v2.1 and v2.2 UPDATE 1: tested with a scale and with spring v2.0 I got 3kgf with a lever of 6.9cm which is about 2Nm torque, not as strong as I thought but the spring can…
Bracket for car trailer 7 PIN plug (Support pour prise de remorque) Grey PETG I used two M8 inox A2 bolts (Tube 50x50 mm) (Feu Vert B1 51 / Erde)
Heres a set of hooks to hold your torque wrench. Mine is Riderace which measures 16mm and 23mm. Printed on a side with PETG
Search Part No. at JLCMC : CXKK Inner diameter:5-20mm Outer diameter:26-36mm jlcmc.com is an automation mechanical platform. We specialize in mechanical parts and industrial automation, with over 600,000 products and a 100,000 m²…
The CUDA DPV has a fair amount of the torque caused by the prop rotation. These fins are to counter most of this prop torque. The two files are for one cowl strut. I use PETG for the print. It has good heat and UV resistance and a little…
First of all, If intrested in torque wrenches please visit: https://www.prusaprinters.org/prints/24539-torque-wrench-handles-from-10nm-up-to-30nm When I first saw the A_R_B toque wrenches design it was very inspiring to me. This design…
This model is designed to be printed laying sideways. Use supports for the CV inner race slots. Do not use 100% infill as it will be too stiff and ruin the rest of the drivetrain.
This is an adjustable torque limiting Hex driver. It uses clutch plates and a spring to limit the maximum torque on fasteners. Any hex bit can be used. It is best for low torque applications as it has not been tested with higher force…
This tool enables the installation and removal of a Tri-Lug muzzle device using a 1/2-inch torque wrench or ratchet. It fits over the Tri-Lug muzzle device and can be used with either tool to install the device to the manufacturer's…
Just a very simple Socket to Bit adapter for G.design's Torque Nozzle Tool. I recommend printing it on its side for the most strength. I used Inland PETG+. G.design's Ratcheting Nozzle Tool…
Revision V2 I found a stiffer spring that can be used alone and is easier to adjust. It was labeled #7 Compression 1-38 L x 5/16 OD x .041 AWG. With the stiffer spring I managed to break a leg off the handle so I revised the handle,…
I bought a torque insert to stiffen up engine movement for my GR Corolla. I decided to model it before install since the shape didn't look too complicated. Test print was done with PETG using a 0.8mm nozzle and was cancelled midway…
Screw this print directly to the wall making sure the drive square is level. Snap in your Ratchet, Torque Wrench or Breaker bar
This is a replacement part for servo support in a "Biglift" towing plane wing. 3 parts to print, glue the two plates and screw the servo lock. Support de servo de remplacement dans l'aile d'un remorqueur "Biglift ". 3 parties à imprimer.…
This is a 2.5 Nm rotor for the original model from Patrick Harrer . The rest of the tool models can be downloaded there. This rotor was printed and tested with white eSun PLA+. The FreeCad model is included should you need to adjust the…
This is a simple torque arm which I designed for my DIY e-bike powered by a 500W direct drive hub motor since the other design I ordered didn't fit. You will need to adjust axle angle matching to your bike. I suggest to print out in PLA…
This is a 2x2x6U gridfinity-compatible storage bin designed for a Slice Engineering nozzle torque wrench. The bin lets you store the wrench (and the 7mm adapter) horizontally, and is stackable.
Designed for these five tools: 1x Drehmoment-Schraubendreher TorqueVario®-S electric variabel einstellbare Drehmomentbegrenzung 0.8 - 5 (26626) 1x Einstellwerkzeug für Drehmoment-Schraubendreher mit Längsgriff 90 mm (26864) 1x…
well, if you use heat, the gear can be removed with pliers, so do that instead. Most HRS-550 DC Motors come with a gear on its shaft, in most cases you just want a simple shaft that you can attach a coupling or similar to it, this part…
J'ai réalisé ce support de prise pour remorque de diamètre 36 mm, sur la photo il est fixé sur un tube carré de 60x60mm. Fixé à l'aide de deux vis autoforantes, les trous de la pièce font 5mm de diamètre et l'épaisseur de la pièce à ce…
more stable version; printed in TPU, as hot as possible; layer hight 0,2; use 10 wall thickness; no infill
The stock setup typically uses a 15-tooth drive pulley & 31 tooth driven pulley, providing a gear ratio of 2.067 . By switching to this 12-tooth pulley, the ratio increases to 2.583 , delivering approximately 25% more torque to the driven…
Gridfinity modules to hold a 1/4" torque wrench from Harbor Freight. Swap colors where the text starts for readable labels. Includes spots for the extensions that come in the blow-molded case.…
Remix of Nozzle Torque Wrench & Bit Holder Gridfinity by crealitycheck. Lowered bin height and added nozzle holder(s).
Nut knob/thumb nut Nice leverage and grip for higher torque finger tightening and loosening. -Right now for M6,M8,M10,M12 nuts fits both nylon and normal nuts nicely and tight and has slim slick profile for purposes. Ask for other nut…
Screws will be necessary for the placement of the motor, first you have to install the adapter on the motor and then place the motor on the machine fixing it with the cover https://www.printables.com/es/model/356919-pet-filament-machine…
yo use pet g de dos colores para destacar rejilla y logo
Wera 7515 Kraftform Safe-Torque Speed holder gridfinity tray.
Many higher end Trek bikes used to come with the Bontrager Torqkey (Trek part number 414046) - a fixed torque wrench set to 5Nm with a glued-in 4mm hex bit. This is a nice little tool which has many uses on bikes, so it's handy to keep it…
Gridfinity ¼ cheap torque ratchet holder, will probably fit almost every similar one. 20x10 magnets in the base to keep it steady in a metal tool box.
Inspired by this model , but completely remade to reduce gear size 2x to give more torque, as well as strengthen mount to drive heavier blinds. Onshape link
About half the height of the model this is remixed from
maybe not useable for most of the common plastic filament. pls lemme know if your filament works for this model tighten your brake hose for the hand shifter more securely but be sure that using smaller torque setting . the distance to the…
Tool to get that lid tight. For Nozzle Torque Wrench thingiverse.com/thing:4738816 Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Notes: Cylinder modifiers to make pins…
Original Model: Torque Wrench Handles from 1.0Nm up to 3.0Nm by A_R_B https://www.printables.com/model/24539-torque-wrench-handles-from-10nm-up-to-30nm This is a simple remix of it. Just erased the fixed number to make space for you to…
This mini ratchet is sold by Topeak and O'Reilly Auto (branded Power Torque). This 5 hex bit holder is printed from TPU and clips onto the handle of the ratchet. If you use short bits, two holders with a total of 10 bits clip onto the…
Nothing's wrong with the original design, it's just that the original case is somewhat costly to reprint just to closely match with the measured torque of the rotor. And that can create unnecessary waste. This model enables you to closely…
This is a print in place torque wrench for ¼" hexbits. The torque values are confirmed using a torque wrench. These values are affected by material used, I designed these using Eryone White PLA. The print has decent tolerances, so should…
I think A_R_B 's fixed torque wrench is one of the best things on Thingiverse. I've got a couple and needed another and thought that it would be nice to not have to dig out a socket when I was working with them. Pretty simple design,…
.STL for UV3 and UV3XL torque ring. 3mm, 4mm and 5mm cups for different sight pictures. Models for both UV3 and UV3XL Best printed in PETG Infil 100% Layer Height .10 for best results
Casquillo de Reemplazo para Enrutamiento Interno – Canyon Torque y Otras Bicicletas Canyon ¿Cansado de que el casquillo original de tu Canyon Torque se rompa después de descensos intensos o grandes saltos? Nuestro casquillo de reemplazo…
This torque wrench is printed from PETG. PLA can be used for some parts but the Rotors must be PETG. Six rotors provide torques of 0.5, 0.75, 1.0, 1.5, 2.0, and 2.5 Nm. The 0.25 inch square bar that connects the rotor to the socket can be…
Holder for the Torque Wrench Handle . Uses CSD_Salzburg 's universal hook.
Gridfinity storage bin for Red Cycling Products Torque Wrench Toolset (sold by several other companies under their own Brand) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution:…
Hollowed to waste less resin. Designed to slot into the end of your dental slow speed handpiece - when you turn it, it can be used to remove healing abutments, TADs etc. Don't come crying to me if it brakes within the handpiece!
Torque Blocks for Downhill Longboard. Width 7.75" to 9.5". This “Spoon” version is advanced design made with cutout specialy for standup slides. Print in TPU 95a. 0.2 Layer Height 6 Top Layers 3 Bottom Layers 3 Perimeters 12% Gyroid…
This is a replacement torque bushing for The Ibanez Edge series pop-in tremolo bar. Instructions I printed @ 0 fill 3 walls 100 micron. Caveats: These have an outward draft, be sure to insert the thinnest feature tword bottom of the bar…
Torque wrench attachment that allows you to screw it to the wall. I used an insert mount for the Honeycomb storage wall. Printed with Spectrum PCTG Pure Orange.
![Nut Knob High-Torque [Slim version] (M6, M8, M10, M12)](https://media.printables.com/media/prints/9e7307aa-3acc-481d-977e-597837b06608/images/10984505_1609b1a4-bce7-4210-9096-e212ca078628_2a734f27-ee6c-4840-9b0a-df3aa84a521c/image_1761250603116089.jpg)
