Torque measuring tool (AKA newtonmeter-tester AKA Torque-bar)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I just cut a 1/4" hex slot and a small hole at 200mm, for more possibilities
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 179
- Makes
- 6
- Views
- 1,552
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As written above, I cut a straight ¼" hex slot in order to have the possibility of using the tool with a ¼" adaptor. I also cut a small hole on the scale side, so it can be used with a scale that pulls a thread, like a luggage scale, instead of a kitchen scale. Note that a kitchen scale can still be used with this remix, same as for the ¾" nut.
Last but not least, thanks much to A_R_B for a great torque wrench and bar designs, with tolerances that print right on the spot with my setup (all parts printed in PLA).
Update : re-drawn on Jan 15th 2023