Counting matching models…
Dies ist die zweite Version des Outdoor Gehäuses für umgebaute Osram Smart Plugs. Dies ist die V1: https://www.thingiverse.com/thing:4070923 ACHTUNG, für den Ubau sind gute Lötkenntnisse erforderlich !!! Falls ihr nicht sicher seid das…
Dies ist ein Outdoor Gehäuse für umgebaute Osram Smart Plugs. ACHTUNG, für den Ubau sind gute Lötkenntnisse erforderlich !!! Falls ihr nicht sicher seid das ihr das könnt, lasst es bitte vom Fachmann machen! Die angewinkelte Platine…
Small adpator quarter turn mount to osram square mount. I have a prototype osram rear light and designed this adaptor for the osram seat post clamp I printed it solid and works fine.
Dieses 3D-gedruckte Gehäuse ist speziell entworfen, um eine Fotodiode (OSRAM BPW21)zu halten, die verwendet wird, um das Flimmern von Lampen mit einem Oszilloskop zu messen. Es verfügt eine Öffnung für den BNC Stecker sowie eine…
I bought two of these nice torches and both of them suffered from a broken battery holder, they simply fell apart over a short period of time. This holder is, as the original one, made out of two parts, i used the original screws to fix…
Easy to print mounting adapter for DIN Rails. Compatible with OSRAM DALI Professional Pushbutton Coupler OSRAM DALI Coupler Pushb G2 (4062172087575) inventroncs DALI Coupler PushB G2 Snap on via Screwdriver
I wasn't happy with the handle of my original lok-it key, so here is another one with better grip and easier to put on a carabiner. There is a reinforced hole on the side of the handle for you to insert a T20 torx bit, just heat it up and…
Vonoi Abdeckung für die Smarte Osram Gartenlampe. Meine Frau empfand die Lampen als zu Hell und langweilig. Kleines Überzieherli um die Optik zu verschönern. Fusion Datei, wie immer, mit dabei. Feel free to remix
Holder for remote controler (OSRAM light) hook on cot (23mm)
The Osram / Ledvance outdoor zigbee smart socket is designed to mount on a spike and be rammed into soil to keep it off the ground. There is no way to adapt this to be a wall mounted socket. This small wall holder solves this problem.…
untere (größere) Ersatzspannhülse für LED-Scheinwerfer-Stativ mit Trapezgewinde TR38x3, die originale Spannhülse war geplatzt Festigkeit ist mit PLA ausreichend, gedruckt auf einem Prusa XL
This is a Stand for the Osram Nightlux LED lights. I remixed this, because i want a "Standalone" Stand (dont want to fix it in a Wall) for vertical and normal Positioning of this Light. If you are looking for the Lights use this Link:…
A simple clip-on holder that mounts an Osram (LEDVANCE) LED Switch Batten on an IKEA SKÅDIS pegboard. Hook it into the board and snap the light in. You don't need screws, glue or tools, and you can move the light whenever your layout…
Mount it with a screw or tape
Screw a thread adapter from 1/4" to 3/8" into the printed plastic block. It is best to choose the version without a flange (it is more stable). The block is then glued to the underside of the light with 2K adhesive.
xxl-Fassung Abdeckung für Osram Vintage 1906 Spiral Filament Leuchtmittel E27 Es deckt eine klassische E27-Fassung ab um damit des zu der großen Osram Lampe optisch besser passt. kein Support PLA oder PETG
Background: Ever had an old Osram Vacublitz bulb filled with aluminum foil and thought "I want that as a bedside reading lamp!"? No? Well, I did. I got a load of old photography stuff and among them were a beautiful old TOR Flash with…
A simple magnetic clip mount compatible with OSRAM LEDstixx LED stick lights, designed for quick installation using two 5×5 mm magnets. Features Magnetic attachment No supports required Fast print Simple installation Low material usage No…
Print in anything other than PLA, since i don't expect it to hold up well in the hot summer months. Consider printing it in only perimeters, since it will not cost much extra filament.
I was annoyed by the original flaps which came lose all the time. Also I bought more adapters which needed a place for storage. Oscad Files if you want to modify it. PETG with 10% Infill, nothing special.
Mr Fox decided it was time to get rid of all his power hungry halogen ceiling spotlights and replace them with something more "umweltfreundliches". This retaining clip did the trick. It is a snug fit for the Osram MR16 GU5.3 LED bulbs.…
2 different covers to minimize the field of view of the motion sensor.
3D Scan and Model of the Osram Lightbar WL VX125-WD https://www.osram.de/ecat/Lightbar%20WL%20VX125-WD-Value%20Serie-LED
Mr Fox decided it was time to get rid of all his power hungry halogen ceiling spotlights and replace them with something more "umweltfreundliches". This retaining clip did the trick. It is a snug fit for the Osram MR16 GU5.3 LED bulbs.…
2 different covers to minimize the field of view of the motion sensor.
Screw a thread adapter from 1/4" to 3/8" into the printed plastic block. It is best to choose the version without a flange (it is more stable). The block is then glued to the underside of the light with 2K adhesive.
A magnetic holder for the OSRAM DOT-it LED light. Allows for battery change without removal of the holder. It is not a tight press fit, so you might need a drop of glue. The magnets need to be glued in place. You require four 5 mm…
UPDATE 18.01.2025 Instead of 5 round magents I use one magnet ring 25x2-10mm (eg here ). The magnet ring has click insert and doesn't need any glue. Needed to increase the strength of the magnets of my OSRAM Nightlux. I use it in my car…
Glass replacement for OSRAM AQUALED 4. Print Settings Printer Brand:Prusa Rafts: No Supports: Yes Resolution: 0,2mm Infill: 15% Filament: Geeetech PETG Transparent
I designed it so that it wouldn't put pressure on the gasket. The thread will cut itself into it. PET-G Aurapol
A simple tool designed to help remove Osram lok-it lamps from moving light like Martin Mac Vipers. There is a hole in the middle for a lanyard. Holes in the handle for a torx t20 wrench. I plan on updating this a bit more, but feel free…
The problem with the Osram Nightlux is the magnetic holder. This holds not particularly good. For this reason I have created a wall bracket, which is glued or screwed. Thus, a battery change is possible at any time. Print instructions…
Created for device: OSRAM LEDguardian® ROAD FLARE Signal V16 Magnes installed in the Osram device is not strong enough to be sure that it won't fall off during the ride - especially when mounted on ATV/SSV/UTV, a tractor, motorcycle or…
Simple wall mount for the Osram Batterycharge 904. Change the mounting holes to suit, countersunk bolts are required! Snug fit, resize if you want a loose fit.
BMW s1000r Ersatzteile LED Lichtabdeckung, Kappe, Umbau, Tuning, Anpassung. BMW-Ersatzteile für Ihr Motorrad. Ersetzen Sie beschädigte Teile oder verleihen Sie Ihrem Motorrad mit diesen Tuning- und Styling-Teilen einen einzigartigen Look.…
I wanted to create an adjustment to my light to allow me to stick a smart switch on top and yet still access the switch underneath I also wanted it to look good I didn't end up using this in the end (I've created a brick one instead which…
Dies ist eine einfach Wandhalterung für den Bewegungsmelder Osram Motion+. This is an easy wall mount for the Osram Motion+ motion detector
