Magnetic clip mount compatible with OSRAM LEDstixx
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Unofficial magnetic clip mount compatible with OSRAM LEDstixx LED stick lights.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A simple magnetic clip mount compatible with OSRAM LEDstixx LED stick lights, designed for quick installation using two 5×5 mm magnets.
Features
Magnetic attachment
No supports required
Fast print
Simple installation
Low material usage
No glue required during testing
Print settings
Material: PLA
Layer height: 0.2 mm
Infill: 5-20%
Supports: Not required
Hardware
2 × 5×5 mm cube magnets
Notes
Magnet fit may vary slightly depending on printer calibration and magnet tolerances.
Example magnets used for this project:
5x5x5mm Magnet
If you appreciate my work and want to support me, please leave a Like.
I you appreciate it even more, you can buy me a coffee
Happy printing.
This is an unofficial accessory and is not affiliated with, sponsored by, or endorsed by OSRAM. OSRAM and LEDstixx are trademarks of their respective owners.
Some links are affiliate links. I may earn a small commission at no extra cost to you.