P
PrintablesRACBOTS
Casco Moto Llavero - Motorcycle Helmet Keychain
Llavero de casco de moto para decorar tus llaves o accesorios. Tamaño: 21.92 mm x 31.39 mm x 21.51 mm
- Downloads
- 5,693
- Likes
- 552
- Rating
- 5
Search results: otorcycle
Counting matching models…
P
Printablesboomke
motorcycle helmet holder
Did find this model on thingiverse very handy for placing ur helmet niceley on the wall. Gcode provided is with Amazon Petg ! be care full. printed with 6 perimeters and adaptive cubic infill or Gyroid 60% more models for this hook in…
- Downloads
- 4,837
- Likes
- 571
- Rating
- 5
P
PrintablesBootjevaarder
Motorcycle Roller Chain Key Ring
General Another keyring for gearheads! Pick your motorcycle brand and engine configuration. Print the roller chain, the sprocket holder and the name plate/configuration plate in your favourite color(s). Printing I printed the model on a…
- Downloads
- 4,614
- Likes
- 1,735
- Rating
- 4.88
P
PrintablesBootjevaarder
Motorcycle Key Ring
Pick your motorcycle brand and engine configuration. Then print the two key ring halves and dowels of your choise in your favourite color(s). Glue the dowels in one halve, and glue the two halves together. Ride safely! Related Model…
- Downloads
- 3,786
- Likes
- 894
- Rating
- 4.87
P
PrintablesTmpx64
Motorcycle / Motorbike / Scooter / Moped Keyring / Bike Keyring/Keychain - Key Charm - Gift idea - Gift inspiration - Klíčenka skůtru
One for every kind. Simple and fast to print. Just attach it through one of the wheels as shown in the picture. This is a very quick and easy print and a great way to use up the last meters of your filament. If you are looking for a…
- Downloads
- 3,344
- Likes
- 444
- Rating
- 5
P
Printables3Diocrity
Motorcycle Throttle Stop (Cruise Control)
Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…
- Downloads
- 2,786
- Likes
- 321
- Rating
- 4.94
P
PrintablesNiffels
motorcycle chain lube thing for 520 chains
Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…
- Downloads
- 2,610
- Likes
- 630
- Rating
- 4.91
P
PrintablesMolodos
Parametric car/motorcycle license plate keychain (Nummernschild/Kennzeichen)
A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…
- Downloads
- 2,506
- Likes
- 451
- Rating
- 5
P
PrintablesZbysekz
Motorcycle helmet holder
Design from https://www.thingiverse.com/thing:2504368 I have added supports - download slicer project in files. Printed in PLA - 0,2mm with 10% infill. It is very sturdy.
- Downloads
- 2,209
- Likes
- 306
- Rating
- 4.88
P
PrintablesPugwash
Dummy 13 Motorcycle Helmet with Posable Visor
A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…
- Downloads
- 2,108
- Likes
- 470
- Rating
- 5
P
PrintablesBostra
Motorcycle helmet hook.
Tisk je velmi jednoduchý. Pevnost je dostatečná z PLA, ale můžete klidně použít PETG. Tisk vrstvy 0,2-0,28. Tyto dva soubory jsou rozdílné pouze v otvorech na vruty, kde jeden je na plochou hlavu vrutu a druhý na zkosenou hlavu vrutu.
- Downloads
- 1,897
- Likes
- 295
- Rating
- 4.94
P
Printablesvicesat
Body Air Intake (Riding a Motorcycle)
No Supports > 35% Best in TPU (more confortable)
- Downloads
- 1,744
- Likes
- 1,653
- Rating
- 3.67
P
PrintablesDr Operator
MINI 13: Motorcycle
I wanted to do more to show the potential of the Mini 13 frame and how you can use it to make more than just awesome 3.5" action figures so I made a motorcycle for Lucky/Mini 13 that is built on the Mini 13 frame. On top of downloading…
- Downloads
- 1,604
- Likes
- 588
- Rating
- 5
P
PrintablesMrBone66
Motorcycle Helmet Hanger
Hang your helmet on the wall for easy storage. Securely holds in either direction. Print in any material with 3 perimeters and 15% infill with supports.
- Downloads
- 1,585
- Likes
- 277
- Rating
- 4.93
P
Printablesreddadsteve
AKIRA motorcycle
Kaneda’s bike - Akira motorcycle. Akira is a 1988 Japanese animated post-apocalyptic cyberpunk action film directed by Katsuhiro Otomo, produced by Ryōhei Suzuki and Shunzō Katō, and written by Otomo and Izo Hashimoto, based on Otomo's…
- Downloads
- 1,565
- Likes
- 604
- Rating
- 4.94
P
Printablesrichmitch
Hubless print in place motorcycle
I liked the idea of a hubless motorcycle, so this is what I came up with... of course there are no handlebars to steer... erm that would ruin the look :-) The wheels do spin though and it is print-in-place, so no supports required :-)…
- Downloads
- 1,435
- Likes
- 214
- Rating
- 4.8
P
PrintablesCADScott
Motorcycle Chain Oiler Block - 520, 525 & 530 Size
This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.…
- Downloads
- 1,425
- Likes
- 192
- Rating
- 5
P
Printablesmelkon09
Self Balancing Motorcycle Cup Holder
I have printed this holder with PETG and it's been working great for months now. Every file is to be printed once, with the exception of the spacers , which you will need 4. Apart from the printed files, you will also need: For the cup…
- Downloads
- 1,309
- Likes
- 257
- Rating
- 5
P
PrintablesJahn Roux
Motorcycle Helmet Hanger
A simple hook to hang your motorcycle helmet on with a hook that fits a plastic coat hanger for a jacket.
- Downloads
- 1,293
- Likes
- 161
- Rating
- 5
P
PrintablesMartin Prager
Motorcycle Throttle Wrist Lever with teeth
I added teeth because original design was slipping on my handles. Category: 3D Printing
- Downloads
- 1,225
- Likes
- 196
- Rating
- 5
P
PrintablesEd van der Heijden
Harley Davidson motorcycle Designer Ed van der Heijden
Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Bolt 3 times M2 x 20mm, 2 times M2 x10mm Rems do not use support!!!! only rems: Speed 60mm/s
- Downloads
- 1,178
- Likes
- 262
- Rating
- 5
P
PrintablesEd van der Heijden
BMW R60/2 motorcycle 1964 scale 1:6 Designer Ed van der Heijden.
BMW R60/2 1964 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s
- Downloads
- 1,167
- Likes
- 367
- Rating
- 4.75
P
PrintablesMinds Eye Miniatures
Wall Mounted Motorcycle Helmet Hanger
There are plenty of helmet mounts out there, but I didn't love any of them so I went ahead and made my own. Easily prints on its side with no supports necessary. I made mine out of PLA-CF with 4 layer wall width and 20% infill, and its…
- Downloads
- 1,142
- Likes
- 141
- Rating
- 5
P
PrintablesVize3Dtisku
50+ Keychains of moped, scooter, veteran and motorcycle
Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student.…
- Downloads
- 1,139
- Likes
- 175
- Rating
- 4.6
P
PrintablesGorby
Motorcycle Helmet Hanger with Hook
This remixed hanger for motorcycle helmet includes a large hook that can fit an MC jacket and pants.
- Downloads
- 1,113
- Likes
- 93
- Rating
- 5
P
Printableswagnerjack228
Motorcycle Helmet GoPro Mount
This motorcycle helmet GoPro mount was designed for the Scorpion EXO-T510 Full Face Helmet. The part can be heated with a heat gun to match the profile of the helmet more closely. If this helped you out, tips are welcome on PayPal or…
- Downloads
- 1,062
- Likes
- 191
- Rating
- 5
P
PrintablesFabrizio
UPDATED American Touring Motorcycle Oil Filter drain pan
drain pan to avoid the oil from filter messing up the engine front. the new version with an enlarged hose fitting an better coverage under filter's housing
- Downloads
- 1,043
- Likes
- 79
- Rating
- 4.67
P
Printablestuny
Dummy 13 Motorcycle Helmet
Dummy 13 Motorcycle Helmet You gotta be safe when you're out riding in the wilderness. Get your helmet here and protect that precious, plastic head! :P (Pictured below with the Dummy 13 Dirt Bike and the Light Kit I designed for it!)…
- Downloads
- 1,038
- Likes
- 303
- Rating
- 5
P
Printablesnouc
Motorcycle chain "slack ruler"
Hardware required: socket head screw: M5, length: 15-35mm
- Downloads
- 977
- Likes
- 152
- Rating
- 5
P
Printablesklimoma
Ducati motorcycle - wall art
Ducati motorcycle - wall art, easy to print
- Downloads
- 961
- Likes
- 136
- Rating
- 5
P
PrintablesDavid Šilpoch
Motorcycle Handguards
handguards for your motorcycle frinted from petg
- Downloads
- 934
- Likes
- 87
- Rating
- 0
P
PrintablesOld Machinist
KTM Husqvarna Gas Gas Motorcycle TPI 2-Stroke Oil Fill Cap Sleeve
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
- Downloads
- 902
- Likes
- 44
- Rating
- 5
P
PrintablesAlbatrog
Clamp - Universal motorcycle phone holder
Since all the phone holders I found online were either expensive or just bad, I decided to make my own. Note: This was designed for metric standard elements and 23mm handlebar diameter. Contact me if you want me to redesign it for…
- Downloads
- 860
- Likes
- 190
- Rating
- 5
P
Printablesthall72
Lego Compatible (4480c01.dat) Bike 2 Wheel Motorcycle Frame 3 x 6 x 3 (Complete)
This model is compatible with the lego system.
- Downloads
- 839
- Likes
- 135
- Rating
- 5
P
PrintablesHekMaker
Wall mounted motorcycle helmet holder
I have made a new design based on the Thingiverse model: https://www.thingiverse.com/thing:1647126 I have made the design with the same appearance and measurements, but adapted only to one hole at the top. I have printed it with PETG at 3…
- Downloads
- 832
- Likes
- 61
- Rating
- 4.67
P
PrintablesNorfus
Detachable Devil Horns for Motorcycle Helmet
Detachable devil horns for motorcycle helmets. Can be detached from a base on the helmet. Mounted using a twist lock / screw mechanism. I recommend printing it in PETG and printing screw_in_mount and screw_insert slower for better print…
- Downloads
- 823
- Likes
- 101
- Rating
- 0
P
Printableszwoolf
Motorcycle Helmet Wall Hanger
I needed somewhere to store my motorcycle helmet, and thought this simple wall hanger might do the trick. I printed this in PA-CF with the Bambu Lab X1 Carbon. Layer Height 0.2mm Filament - PA-CF Orientation - Print on Side (better…
- Downloads
- 778
- Likes
- 111
- Rating
- 5
P
Printablesanonimowy891
Motorcycle helmet hanger
Simply hanger for moto hemlet.
- Downloads
- 757
- Likes
- 175
- Rating
- 4.86
P
PrintablesIulian Lupescu
Motorcycle Chain Oiler
Angled Motorcycle Chain Oiler. You can use zip ties or tape to fix it on the spray tube.
- Downloads
- 756
- Likes
- 162
- Rating
- 5
P
PrintablesEd van der Heijden
BMW R32 motorcycle year 1925 scale 1:6,5 Designer Ed van der Heijden.
BMW R32 year 1925 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s All axles are equipped with m3. Likewise the fork pin is m3.
- Downloads
- 712
- Likes
- 214
- Rating
- 5
P
PrintablesEd van der Heijden
Harley Davidson motorcycle year 1910 by Ed van der Heijden
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s
- Downloads
- 708
- Likes
- 172
- Rating
- 5
P
PrintablesStawiamKlocki.pl
GoPro Quick Release mount for Bike Motorcycle Helmet LS2 FF327 CHALLENGER
This is custom GoPro mount for my friend's special order. The idea was to mount GoPro base in front center. It works fine and get a best possible camera angle. I will post better pictures of real print soon ;) Skechup file included - feel…
- Downloads
- 706
- Likes
- 110
- Rating
- 5
P
PrintablesContraptor Lab
<BRB> Motocross | Motorcycle - Keychain
<BRB> Motocross | Motorcycle - Keychain
- Downloads
- 670
- Likes
- 66
- Rating
- 5
P
PrintablesEd van der Heijden
Indian Chief motorcycle year 1947 designer Ed van der Heijden.
Indian Chief year 1947 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
- Downloads
- 652
- Likes
- 146
- Rating
- 5
P
Printablesrevoxsvko
Speedway motorcycle wall deco
Simple, "classic" speedway motorcycle wall decoration. The gcodes are for 0.6mm nozzle. Stl/3mf may be added later.
- Downloads
- 649
- Likes
- 88
- Rating
- 5
P
Printableserickgull
ghost rider + motorcycle (chibi version)
Figure designed in a chibi version of GhostRider model articulated with his motorcycle printed in pla and resin joined.
- Downloads
- 616
- Likes
- 159
- Rating
- 5
P
PrintablesGreenhat
Indian Motorcycle Light Box
Light box with Indian Motorcycle Logo. Print instructions 2 Files. one is the case and the other is the face. Face: Size is designed to be 162x162x3 I sliced it to do white for the first MM and black for the last 2 mm. GCode is already…
- Downloads
- 610
- Likes
- 113
- Rating
- 4.86
P
PrintablesFilip
Triumph Motorcycles Logo
Made to be glued on two sides of motorcycle, but there's much other ways it can be used. I recommend printing this with 0.2mm or 0.25mm nozzle as the embossed part is quite thin.
- Downloads
- 609
- Likes
- 51
- Rating
- 5
P
Printablesgrumpy_scrambler
Motorcycle ToolBox
A Tool box for the bag carrier of my scrambler. I uploaded the files without the mounting holes, so it should fit other bikes too. Opening for the lock is suitable for a "Burg-Wächter ZS 84 SB", others may fit too. Depending on the lock…
- Downloads
- 581
- Likes
- 200
- Rating
- 0
P
PrintablesFranky 71
Porte clé moto - motorcycle key holder
Porte clé moto, prêt pour la saison… Bonne impression et surtout bonne route, soyez prudent! ✅ 5 Johann ZARCO ✅ 20 Fabio QUARTARARO ✅ 46 Valentino ROSSI ✅ 63 Francesco BAGNAIA ✅ 93 Marc MARQUEZ Si vous aimeriez un autre pilote dites-le…
- Downloads
- 563
- Likes
- 51
- Rating
- 5
P
PrintablesORDEEP
Honda Motorcycles Magnet
Refrigerator magnet. Requires 2 x 20x6x2mm magnet. It has two versions, one with cutouts for magnets and the other without so that it can be modified for other magnet sizes.
- Downloads
- 551
- Likes
- 69
- Rating
- 5
P
PrintablesLayerShare
Oukitel RT3 Motorcycle mount
THIS IS EXPLICITLY NOT FOR COMMERCIAL USE A motorcycle mount for an Oukitel RT3 rugged tablet against a 22mm bar. The design is intended to be modular and allow different mounting points. The intent is to use the rugged Oukitel RT3 for…
- Downloads
- 550
- Likes
- 36
- Rating
- 5
P
PrintablesMonkeys3DP
Motorcycle Throttle Tube
Throttle tube for motorcycles fits my Honda CG125 BR-J Printed mine in PETG and has lasted perfectly with minimal wear Regular grip fits well and holds well due to natural layer lines from print Print with supports, i recommend paint-on…
- Downloads
- 547
- Likes
- 83
- Rating
- 4
P
PrintablesJesse
Motorcycle keychain
Will add a photo of my print once its complete 0.4 Nozzel 0.14 - 0.20 Layer height 2 Walls 2 Bot layers 2-3 Top Layer 7-15% Infill These are my settings may not work for everyone, I use PLA don't see why it wouldn't work with PETG
- Downloads
- 545
- Likes
- 46
- Rating
- 5
P
PrintablesJohn
Motorcycle kickstand extender
A simple card to throw down and put your kickstand on when parking on soft ground. Much cheaper than an a fancy bolt on. If you lose or forget it, you can just print another one. This one has a Honda logo.
- Downloads
- 542
- Likes
- 152
- Rating
- 5
P
PrintablesJakub Jurczyk
1:15 | 2025 Honda CB650R | Motorcycle Model
Please don’t forget to like the model here on printables if you enjoy it! This is a 1:15 scale model of the 2025 Honda CB650R, meant to be printed in pieces and assembled without using glue (With the exception of second color for the…
- Downloads
- 529
- Likes
- 172
- Rating
- 5
P
PrintablesMarkus Skjot
Motorcycle parking brake
A handy tool to secure the brake handle of your bike in braking position. Printed in PETG with layer height 0.2mm, other filaments should work just fine.
- Downloads
- 522
- Likes
- 100
- Rating
- 4.5
P
PrintablesJeremy Hughes
Motorcycle helmet wall hook
A hook for hanging a motorcycle helmet on a wall. Designed for countersunk screws with 7mm head and 3.5mm threads. Print instructions Category: Automotive
- Downloads
- 521
- Likes
- 107
- Rating
- 5
P
PrintablesT3CHKOMMIE
Motorcycle Hand Guards and Mounts for Vstrom 650 (and others)
I was looking for a simple set of hand guards to take the wind off my hands in the winter and maybe handle a few bugs/rocks/rain in the summer. I couldn't find anything else online that I could remix, so I spent MANY hours with FreeCAD…
- Downloads
- 516
- Likes
- 84
- Rating
- 5
P
PrintablesFuganater
Modern Key Hanger Fobs (Scooter/Tuk Tuk/Minivan/Motorcycle/House)
I imported the fob into Fusion 360 and added some simple designs to easily identify what each key was for. For me this was an electric scooter, minivan and a tuk tuk. I have included a .f3d file so you can more easily make your own!…
- Downloads
- 508
- Likes
- 258
- Rating
- 0
P
PrintablesIulian Lupescu
Motorcycle Helmet Hanger
This is not my model! I just took it from Thingiverse and uploaded here. All the credits goes to SergiLorenzo. Just the photos are mine. I needed a wall mount hanger for my motorcycle helmet, so I decided to print this one. Settings that…
- Downloads
- 498
- Likes
- 99
- Rating
- 5
P
PrintablesEd van der Heijden
Indian motorcycle single cilinder 1910 designer Ed van der Heijden
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s Certainly! Here's a brief overview of the history of the 1910 Indian Single motorcycle: The…
- Downloads
- 497
- Likes
- 90
- Rating
- 5
P
PrintablesJulio
Motorcycle 525 Chain Oiler
Chain Oiler for 525 motorcycle chain for optimal oring lubrification 0.1mm 15% in fill
- Downloads
- 494
- Likes
- 57
- Rating
- 4
P
PrintablesKen226
Indian Motorcycle Kickstand Pad
Keep this under the seat of your Indian. Next time you park on dirt, this could save you from dumping your bike. Print with plenty of infill, and switch filaments at the appropriate layer to get the nice logo infill.
- Downloads
- 487
- Likes
- 50
- Rating
- 5
P
PrintablesJunorion
80s TONKA Motorbike / Little Red Motorcycle Dirtbike Toy
I loved this little toy when I was a kid. I recently got one and really wanted to try a 3DP version so here it is. The model is split into left and right sides and uses 4 materials (PLA Red, Blue, Silver,Black @ .020mm SOLID layers) .…
- Downloads
- 480
- Likes
- 55
- Rating
- 4
P
PrintablesHennie
Motorcycle puzzle
This Motorcycle puzzle was originally a woodworking project of my brother in law (as shown in the picture with the red details). I took the original and made a drawing as an SVG file. With Fusion 360 I created a 3D model. The black parts…
- Downloads
- 479
- Likes
- 100
- Rating
- 4.75
P
PrintablesMoto
Motorcycle Glove Rack
Print on flat side, no supports, 100% infill Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Infill: 100% Filament: Spool3D PETG Category: Other
- Downloads
- 468
- Likes
- 77
- Rating
- 5
P
PrintablesSutnaarPRINTS
Motorcycle helmet chin mount!
Motorcycle helmet chin mount! It fits most of integral helmets! Print it! Fit your GoPro and record awesome moments! Printer brand: Creality Printer: Ender 3 PRO Rafts: No Supports: yes Resolution: .16mm Infill: Bets is 100% but you can…
- Downloads
- 456
- Likes
- 92
- Rating
- 5
P
PrintablesZneuzity
Motorcycle helmet hook wall mount with key holder
Simple wall mount holder for motorcycle helmet Simple helmet holder wall mounted can be print PLA. It can fit in any type of helmet brand include additional hook design for the keys to hang. recommended 4 perimeters = % infill doesn't…
- Downloads
- 456
- Likes
- 30
- Rating
- 5
P
PrintablesJohnM
Roadlok motorcycle disc lock pin carrier
The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…
- Downloads
- 454
- Likes
- 15
- Rating
- 5
P
PrintablesRi3del
moPad (Motorcycle Side Stand Pad)
The original pad was a bit too big and didn't fit to the flat protruding side stands like those of a chopper. V3 is even smaler. Das ursprüngliche Pad war etwas zu groß und passte nicht zu den flach abstehenden Seitenständern wie das…
- Downloads
- 433
- Likes
- 81
- Rating
- 5
P
PrintablesJaneo
Motorcycle helmet hanger
Wall mount designed for hanging a motorcycle helmet and gear. It features a simple yet attractive design that works well for organizing items at home or in the garage. The simple design allows for easy printing on any printer without…
- Downloads
- 421
- Likes
- 73
- Rating
- 5
P
PrintablesPauly
Motorcycle M10 Mirror Screw Plug
A screw for the standard mirror mount on your bike if u drive mirrors on the end of the handle bar.
- Downloads
- 414
- Likes
- 30
- Rating
- 5
P
PrintablesMars3d
Llaveros Indian Motorcycles
Llaveros del logo de "Indian Motorcycles", famosa marca de fabricación de motos. Los diseños de estos llaveros son con un del logo principal de la marca. Están diseñados para imprimirlos con cambio de color, de 2 colores o de 3 colores.…
- Downloads
- 413
- Likes
- 46
- Rating
- 5
P
PrintablesWhiskey
Motorcycle Clip-on angle finder
Update:I have a V2 files uploaded. Should be a little more stable. All the slide nuts and fork tube adapters should still work. This is a work in progress as i refine the tool ill upload new versions. Saw a similar tool online but could…
- Downloads
- 412
- Likes
- 23
- Rating
- 5
P
PrintablesStuart
Yamaha Logo Motorcycle Tank Badge
This is a Yamaha tank badge that I designed and printed for my KZ650SR tank. The holes centre to centre are 123mm, and accept 3mm countersunk screws. I printed this in PETG at 100% on an Ender 3 and the size fit my tank perfect. The print…
- Downloads
- 408
- Likes
- 55
- Rating
- 5
P
PrintablesJordanBurghoff
Motorcycle ID Card Holder
ID card holder to mount a CAC or ID badge on the handlebar of a motorcycle or bike. Models for 1 inch and 7/8 inch bars. The holder has a cutout to avoid covering the information on both sides of military CACs. Great for getting through…
- Downloads
- 397
- Likes
- 59
- Rating
- 5
P
PrintablesEd van der Heijden
Indian motorcycle Double cilinder 1913 Designer Ed van der Heijden
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s Here's an overview of the Indian Motorcycle Double Cylinder 1913: The Indian Motorcycle…
- Downloads
- 397
- Likes
- 87
- Rating
- 0
P
Printableswingsone
Motorcycle jacket zipper slide
Please visit the project web site for more information.
- Downloads
- 393
- Likes
- 69
- Rating
- 5
P
PrintablesPLAUK
Motorcycle Chain Lube Tool (525/530 Chain)
Motorcycle Chain Lube Tool (525/530) Tool for lubrication of a 525/530 motorcycle chain. Print text down, no supports required. Use a releasable zip-tie through the channel to secure the tool to the aerosol. Cut the straw to length, so it…
- Downloads
- 393
- Likes
- 43
- Rating
- 5
P
Printables3D-maker
Indian Motorcycle logo
this is a print with 2 colors. I removed the top and bottom layers with the modifier tool so that is has a mesh effect on the lower part. printer: Geeetech layer: 0.2 slicer: Prusaslicer
- Downloads
- 387
- Likes
- 35
- Rating
- 5
P
PrintablesThreeDeeByRusty
Motorcycle Bar End - 7/8" I.D.
These 3D Printed - Motorcycle bar ends - Fit All Standard 7/8" ID handle bar ends. They are easy to use and easy to install. The design is such that you should be able to print all of the parts without supports. I had good success…
- Downloads
- 384
- Likes
- 63
- Rating
- 5
P
PrintablesTsaro
Motorcycle chain tension guides
I find it much easier to have a measuring gauge pre-set for our various bikes. Included are models for the following bikes and measurements, check your manual for your specific bike. Kawasaki Versys 650 (25-35mm) Kawasaki Ninja 650…
- Downloads
- 384
- Likes
- 64
- Rating
- 5
P
PrintablesJernejP.
Motorcycle chain cleaner MK1
So this is the first prototype of my fully 3D printed motorcycle chain cleaner. Brushes and straps are printed in flexible materil (i use basic TPU) for the body i used Prusament PETG. I will upload new iterations as i develop them.
- Downloads
- 382
- Likes
- 141
- Rating
- 5
P
PrintablesGoto Dengo
Motorcycle parking disc, Motorrad-Parkscheibe
After Mr. Fehse stopped producing his parking disc , I printed one for myself. I have omitted the suction cups. There are now 2 mounting holes for the padlock (attach to the mirror) and they are further from the edge, therefore more…
- Downloads
- 377
- Likes
- 37
- Rating
- 5
P
PrintablesCurly_Luke
MMU Triumph Motorcycles Keychain
Dual color Triumph Motorcycles keychain. Modern logo version. Just use split into part feature in PrusaSlicer, everything should pop up. I've printed mine in TPU without MMU using a hack :) Add MMU printer config, change toolchange gcode…
- Downloads
- 371
- Likes
- 46
- Rating
- 5
P
PrintablesBrett Norman
Maisto Model Motorcycle Stand (BMW R1250GS)
This stand is designed to not only hold the 1/12th scale model bike, but it also gives you the option to electrify the stand with connection points to the bike. This opens up the option to install LED lights in the bike and have it light…
- Downloads
- 370
- Likes
- 59
- Rating
- 5
P
PrintablesJan B
IKEA Skadis Hook for Motorcycle Helmet
A simple hook to hang your motorcycle helmets on the IKEA Skadis. Printed with PLA 0.2mm 10% Gyroid Supports: Yes
- Downloads
- 368
- Likes
- 54
- Rating
- 4.67
P
PrintablesBootjevaarder
Motorcycle Keyring Hanger
A keyring hanger for gearheads! Wall attachment by 2 screws or double adhesive tape. Printing I printed the model on a Prusa MINI, with PLA+ filament, layer height 0.15 mm, 5 perimeters. No supports needed. Slicing in PrusaSlicer. Related…
- Downloads
- 367
- Likes
- 91
- Rating
- 5
P
PrintablesSilas
Motorcycle Wheel
Work in Progress, the Spokes are not to print, i would use a String for them. It is the first part of an mini caffee racer motorcycle Category: 3D Printing
- Downloads
- 366
- Likes
- 31
- Rating
- 0
P
Printablesnicosandller
AirTag snowboard / motorcycle / bicycle watertight stick up enclosure - attach - case
The model is designed to house an apple AirTag, with a screw in top (cap) and an o-ring for water tightness. I'm also including the fusion 360 file for anyone to make an easy remix there. Printing recommendations Printing the base and top…
- Downloads
- 366
- Likes
- 68
- Rating
- 4.75
P
PrintablesEric Charles
Motorcycle wall helmet holder
I couldn't find a well-made helmet holder 3D model that I liked so I made my own. It has a hook for your keys but due to the printing orientation it's not very strong, so just be gentle with it. I designed it to be printed without…
- Downloads
- 365
- Likes
- 37
- Rating
- 5
P
PrintablesJaroslav
Motorcycle or Quad To Chain Alignment Tool
Manual Chain Aligner, fix the clamp on the rear sprocket and use the rod to observe if the chain is correctly aligned. All you need is 1pc M8 screw and 1pc M6 screw and a rod - I used 3mm aluminum wire. The M6 and M8 threads are…
- Downloads
- 362
- Likes
- 52
- Rating
- 5
P
PrintablesTuTu
Universal Valve Cap for Cars, Motorcycles & Bikes
I have designed a knurled valve cap , as shown in the image. This valve cap features a universal design and complies with the international standard ISO 9413 , ensuring compatibility with common Schrader valves . After rigorous testing,…
- Downloads
- 360
- Likes
- 59
- Rating
- 5
P
Printablesexplorigin
Razor Motorcycle SwingArm Cap
A dust/water cover for the swingarm bolt on Razor motorcycles. Tested on SX500/eFTR Jr. and MX650
- Downloads
- 359
- Likes
- 9
- Rating
- 0
P
PrintablesByMTR
GoPro mount for Bike Motorcycle Helmet LS2 FF327 CHALLENGER safety button
El Master Explica Youtube montura gopro para casco Challenguer LS2, con opcion de pegar con cinta doble cara o tornillos directamente en el casco e incluyo el boton de seguridad por si se safa se quede colgando
- Downloads
- 358
- Likes
- 47
- Rating
- 5
P
PrintablesProject34
Motorcycle Helmet Wall Hanger
Helmet Wall Hanger for displaying motorcycle and car helmets on a wall Category: Decor
- Downloads
- 353
- Likes
- 33
- Rating
- 0
P
PrintablesGoblinhan Yıkan
TR Motosiklet Plaka Anahtarlık - TR Motorcycle License Plate Keychain
Renkleri belirlemek için proje dosyasını açıp, nesneler sekmesinden rengi ayarlayabilirsiniz. aynı şekilde yazılar da nesneler sekmesinden ayarlanır. detaylı bilgi için araba plakası modelini inceleyebilirsiniz.
- Downloads
- 353
- Likes
- 29
- Rating
- 0