Counting matching models…
Paris, Louvre Museum, France. These twenty five 3D scans models were generated for the short movie Gloria Victis ( https://vimeo.com/182609342 ) More images here: https://www.artstation.com/artwork/A6doN In this movie, the Cour Marly was…
This is a cover for 120mm PC cooling fans with an angular louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous…
Make your own Low Poly 3D models using my 3D Low Poly Generator ! Check out my Amazon Page to see what kind of gear I use to make these models. This is a remix of 'Venus de Milo at The Louvre, Paris' , found on MyMiniFactory .
This is a cover for 120mm PC cooling fans with a louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous though, you can…
Here is a decoration for the front of your dock with storage for your game cartridges. Context: I was looking for a dock cover, with the Zelda logo (I'm a fan of the serie), which would allow me to store game cartridges. Surprisingly, I…
---- Update 15 03 2022 I had downloaded the wrong file (opens pot - part1.stl). It was not the final version and it was not functional (thanks JB for picture). I just put the right stl file. (the Gcode was correct) ---- Hello, Here is a…
A remix of The3Designer 's 120mm Angular Louvre Fan Grill to fit the 140mm fans. Scaled to 140mm size and added appropriate screw hole locations. If you like the model, support the original creator using his affiliate link.
Ce couvre canette est prévu pour les canettes alu de 50cl et 33cl. Monster energy, coca-cola, pepsi, icetea etc… Pour les canette de pepsi de 33cl il faut utiliser le couvre canette de 50 cl car le cerclage du dessus est le même que les…
Continuing with the scenic tour through Paris, here's the glass pyramid in front of the Louvre Museum. Note that this model is a bit underwhelming in regards to size, but it's still an important part of Paris. There are 2 options for…
A/C Vent Louvre Tab - Toyota Corolla 2016 Print with tabs facing up with tree supports if possible
UPDATE: Added another brace that prints and works well with the flex in PLA, clips in very nicely. Looks about the same from the outside but the original didnt print well for me so i thickened the insides of the slats, added locator pins…
Let your Louvre Light shine. While mapping out Paris on my daughters ceiling, with the main landmarks printed in white to sit on the street map, I decided it needed a proper light. One that is as close to the real thing as I could make…
- Use TPU filament - Shimano Cleat Covers are easy to use and can help you protect your cleats and improve your grip - To install them, simply slip them over your cleats and make sure they fit snugly - You can remove them by pulling them…
This is a cover for 240mm PC cooling fans with an angular louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous…
This work is based on "Artemis" (https://sketchfab.com/3d-models/artemis-c143bc34131c404a9c01a160b641299f) by Grégoire Desrousseaux (https://sketchfab.com/g.desrx) licensed under CC-BY-NC-4.0…
This is a cover for 240mm PC cooling fans with a louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous though, you can…
Pirámide del Louvre: modelo 3D sencillo para impresión 3D en cualquier impresora 3D
Howdy, I wanted to increase ventilation in my office without the risk of rain damaging any electronics as my server and printer are right beside the window. My solution was to print a few ventilation panels that simply slot in together. I…
Couvre Silencieux Suppressor Cover Diamètre Intérieur +0.15 Diamètre Extérieur sur toutes les versions = 57.1mm
The AC vents on my '95 defender were broken and had missing pieces, so I created some spare parts to repair them. It is quite fiddly to dismantle them, and same goes for putting them together. make sure to drill out all the holes to 2,5…
Introducing the PC Case Fan Grill, a fantastic addition to enhance the appearance of your gaming rig! This model is designed specifically to cover the extra holes around the fans in your case, allowing for 140mm fan options. It is…
I've got a few landscape spotlights that produce an annoying glare when walking by them. Searching a bit, I found the solution to the problem was to place a louver (or louvre) between the bulb and the lens of the spotlight housing. Many…
J'ai modifié le couvre MMU3 pour que ce soit plus esthétique et que le Spool Tank puisse s'ouvrir.
atelier-louvre-head-of-aphrodite repost of https://www.myminifactory.com/object/3d-print-head-of-aphrodite-at-the-runion-des-muses-nationaux-paris-14386 Category: Sculptures
Pour cacher les connecteurs de l'alimentation. Avec connecteur secteur mâle C14 250v 10A à visser Avec Interrupteur à bascule - 2 positions ON / OFF - 250V 6A 21X15mm 2 emplacements prédécoupée pour ajouter des interrupteurs. Nécessité 1…
Honeycombe Louvre filter for Philips Hue outdoor Lily.
Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch Bring one of the world's most iconic museums to your collection with this detailed 3D model of the Louvre Museum in Paris. This printable model…
A fully parametric, user-customizeable louvred vent to keep you cool (and well ventilated)! Most design parameters are fully user customizable using the OpenSCAD customizer (Window > Customizer). Almost any design parameter including the…
These parts are designed for the FreeWing Fa-18C 90mm EDF. These are scale parts to replicate the forward fuselage vents, louvered vents and antennae. You MUST preform ‘foam surgery’ for many of these parts which will violate MotionRC and…
My gift to you this Halloween season. Haven't thought about what you want to dress up as? Need a last minute costume? I got you covered. Throw on a black hoodie, black pants, and a construction vest. Then just print out this necklace, put…
Découvrez cet ouvre-bouteille au design unique inspiré d'une gâchette. Sa forme ergonomique permet une excellente prise en main et un effet de levier optimal pour décapsuler vos bouteilles sans effort. C'est un objet à la fois…
My air conditioner was blowing not enough air into my room, and what air it was blowing was blowing at either a cupboard or straight out the door. The air conditioner vent is an Advantage Air with the vent itself having outer dimensions…
Plaque de recouvrement pour boîte électrique murale 4 trous pour la fixation, carré de 11 cm de côté 3 mm d'épaisseur
Fait en PLA Gyroïde 25% 4 murs verticaux
The Death of Saint Innocent at the Louvre
Petite pince imprimée en 2 matériaux. PETG et FLEX Convient pour les bouchons de diamètre 30mm Les températures de fonctionnement étant différentes, pince en PETG et anneau de préhension en FLEX, l'impression se fait en 2 temps. Un point…
Print Notes: No support needed. Layer Height All bar the flaps, 0.2 mm Flaps, 0.1 mm (0.2 works, but 0.1 give better outcome) Extrusion width Set to 0.4 on all, otherwise the mesh will not be generated., also watch out for elephant foots…
I designed this louvre vent cover for a 60mm fan, as I needed one to fit on the underside of a vehicle mounted Starlink pod. Can be used for any opening that fits a 60mm cover. Recommend using some mesh to make it critter proof. Designed…
Protection des mords d'un étau Dolex 57-150 , dont les mords sont durs et très … mordants. Ces protections plastiques protègent les pièces et les usagers, par les mords très durs. ;-) Les mords d'origine font 151 mm de large, les…
Putting this here for other people to use. Solidworks part included if you wish to make modifications. I printed with 3 wall loops and 25% infill. I have noticed no sag with reasonably full bins, but be cautious.
Allows easy opening of 30ml and 60ml ALCLAD paint bottles when the cap is stuck. Permet d'ouvrir facilement les bouteilles de peinture ALCLAD de 30ml et 60ml quand le bouchon est coller. Print Settings Printer Brand: Creality Printer:…
Replacement A/C Vent Louvre Tab for a 2011 Toyota Corolla. Installs in place. Printed in PETG, with tabs down and organic tree supports.
atelier-louvre-relief-cut-2 Category: Sculptures
If you like my work, don't hesitate to support me by paying me a ☕ https://ko-fi.com/fred2u
Ensures the sensor is kept away from radiated heat while providing plenty of airflow to ensure the temperature and humidity readings are accurate. Mount suits Pimorony BME280/BMP280 (or similar breakout boards). The enclosure is held…
Drucken M5 Gewinde schneiden Passende schrauben länge raus kramen Anschrauben Fertig Print Settings Printer: Self Made Rafts: No Supports: No Resolution: 0,2 Infill: 100% Filament: keine Ahnung Billig halt... PLA grey Notes: If you have…
This is a printable louvred intake vent kit for adding passive airflow to an outdoor storage box, garden cabinet, tool chest, shed panel or DIY enclosure. The outer vent uses angled louvres to help reduce direct rain entry while still…
Infill: 20% Material: PLA/PETG wont matter maybe i should've used a new vent instead of old :)
Pour les enfants, ce petit outil facilitera l'ouverture de certaines bouteilles d'eau minérale. PLA ou PETG Résolution : 0.3 Infill : 30% Sans support Category: Kitchen & Dining
This is a parts storage box to fit onto a louvered panel. I print them in multiple colors on my XL, but you could paint the model to indicate the contents.
This is a scale model of the Louvre area of Paris, France, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
Remix for 120mm_fan_grill_louvre_angular with extra margin(circular, normal)
I wanted to mount some part bins to a wall but all the mounts you can buy are for several bins in one big panel. This is a single bin mount for when you only want one or a handful of part bins.
Designed to hold small humidity/temp sensor (in my case the si7021) with louvered front to protect them from direct sun etc whilst still allowing air flow. The back is friction fit, use a little glue to secure. I haven't added any holes…
Replacement part for a louvre, fitted for the side with the chain. Print with lots of perimeters, many solid top and bottom layers and a lot of infill. Tested are: 4 Perimeters, 8 top and bottom layers @0.15mm layer height, with 40%…
Pour les enfants, ce petit outil facilitera l'ouverture de certaines bouteilles d'eau minérale. PLA ou PETG Résolution : 0.3 Infill : 30% Sans support Category: Kitchen & Dining
Cache en 2 éléments D et G pour aérateurs FALDES 39cm Imprimer sans support en PLA ou PETG. Les petits crochets en encorbellement provoquent de petites bavures facile à retirer. NB sur 2 photos les caches en place sont noir (PLA) les…
A clip that can be combined to create lamellar fencing between posts. Created to build a fence that was both light, easy to assemble, modular and easy to maintain. This kind of fence provides privacy and allows wind to pass through, even…
cord weight easy to print WITHOUT ROLE/WHEEL! you need: 2x m6 screws 2x m6 nuts Print: 100% infill without support
louvre abudhabi coaster
Needed a shim to make these shims from Amazon to work with a normal fence board without sticking out.
Aerogarden cap with louvres to allow water vapor to rise for plants that prefer higher humidity. The purpose of having louvres instead of an empty hole is stop algae growth on parts of the grow deck that are hard to clean. Some algae may…
Cette poignée permet une ouverture facilitée des briquettes de crème et épargne vos dents ! Imaginée pour des personnes ayant des difficultés motrices (préhension ou faible force) imprime en PLA, sans support, remplissage 15%
Cette poignée est adaptée pour faciliter l'ouverture des briquettes de crème pour des personnes présentant des difficultés de préhension et de force. imprimée en PLA, sans support, remplissage 15%
Cette aide technique facilite l'ouverture de boucle d'oreille huggie pour des personne limité dans leur préhension.
The cover of our louvre / jalousie has yellowed over time. I've created an additional cover without replacing the old one. It will be mounted on top of the old cover. The cover is available in two different lengths. You're able to add…
THC_w0134_radRightShutrNoFeedbk and THC_w0130_radLeftShutrNoFeedbk error messages on Tesla Model S. Usually the error is caused by the flaps being broken due to the flimsy original design. This is a 1:1 copy, but with an improved center.…
Constitué de deux parties, ce modèle s'imprime avec quasiment aucun support. La partie centrale reçoit les 4 fixations à chaque angle. Dimensions extérieures: Largeur 70 mm Longueur 220 mm Hauteur 50 mm
To minimize falling dust/particles a set of skirts with louvre vents
Similar to my other model, but now with louvres. This should prevent direct solar radiation on the sensor and hides the electronics inside. For best results, I had to add some supports like on the picture below, the rest prints ok (on…
Protection de la bobine de filament pour les imprimantes Elegoo Centauri. Prévient de la poussière et de l'humidité sans avoir à décharger le filament. A ne positionner que lorsque l'imprimante est à l'arrêt.
FR La micro griffe est un ouvre colis de dépannage Rapide, facile, ultraléger, économique. Il n'est pas fait pour ouvrir des dizaines de colis à la suite, pour ça il est préférable de le faire en métal. Il est là pour vous dépanner quand…
Pirámide del Louvre: modelo 3D sencillo para impresión 3D en cualquier impresora 3D
Louvre air vent used - https://www.screwfix.com/p/map-vent-gas-louvre-vent-white-229mm-x-76mm/4548d Fans used - https://www.amazon.co.uk/dp/B0C8CPZJ11 Printed in PLA with 0.6mm nozzle at 0.3mm layers, but any settings or material should…
Print Notes: No support needed. Layer Height All bar the flaps, 0.2 mm Flaps, 0.1 mm (0.2 works, but 0.1 give better outcome) Extrusion width Set to 0.4 on all, otherwise the mesh will not be generated., also watch out for elephant foots…
This is a parts storage box to fit onto a louvered panel. I print them in multiple colors on my XL, but you could paint the model to indicate the contents.
Découvrez cet ouvre-bouteille au design unique inspiré d'une gâchette. Sa forme ergonomique permet une excellente prise en main et un effet de levier optimal pour décapsuler vos bouteilles sans effort. C'est un objet à la fois…
A clip that can be combined to create lamellar fencing between posts. Created to build a fence that was both light, easy to assemble, modular and easy to maintain. This kind of fence provides privacy and allows wind to pass through, even…
Ce couvre canette est prévu pour les canettes alu de 50cl et 33cl. Monster energy, coca-cola, pepsi, icetea etc… Pour les canette de pepsi de 33cl il faut utiliser le couvre canette de 50 cl car le cerclage du dessus est le même que les…
3D printable topographic miniature of Paris, Louvre and Tuileries - 🇫🇷 France Capture the beauty of Paris, Louvre and Tuileries 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
Louvre air vent used - https://www.screwfix.com/p/map-vent-gas-louvre-vent-white-229mm-x-76mm/4548d Fans used - https://www.amazon.co.uk/dp/B0C8CPZJ11 Printed in PLA with 0.6mm nozzle at 0.3mm layers, but any settings or material should…
this is my first model so the gcode is printed in 0.05 but I think you can try in 0.10 to print faster size is about 20 cm x 2cm
