Search results: p22

Pardini SP22 Rapid Fire Pistol

WALTHER P22 RMR and RIS Mount

Walther P22 or similar air pistol RMR or RIS mount. This part is based on the general concept for the Walther Brand bridge mount giving the user the ability to mount parts above the slide by mounting a bridge to a support under the rails…

Wall mount bracket for TP-Link Omada EAP225-Outdoor/EAP110-Outdoor

After receiving a second hand TP-Link EAP225-Outdoor access point, I discovered that the original wall mount bracket was missing. The design has a low profile and no locking mechanism. Print wall-side down, no supports required.

Eufy Camera wall Bracket for Solo Indoor Cam P24 / P22 Pan & Tilt 2k and 1080p By Ripe3D

Eufy Camera wall Bracket for Indoor Cam Pan & Tilt 2k and 1080p Simple bracket to attach your Pan and Tilt camera to a wall. Bracket works by fixing the mounting plate that comes with the eufy camera to the bracket using the two m3 6mm…

Airsoft-Pistol Stands for 1911, SSP1 (Hi-Capa), HK USP 45, SigSauer P226

Pistol stand for Novritsch SSP1, M1911A1, and HK USP45 ________________________________________________________________________________________________________ If you want, you can buy me a beer :)…

Casio CDP220R Digital Piano Sheet Music Stand

Simple stand to fit in the slot on the digital piano. Step file is included for modification to fit your specific piano as necessary. Supports are required for the insert tab that goes into the piano as it hangs in free air.

WE P226/F226 RMR adapter, base plate

Adapter plate to mount aliexpress style RMR on your WE Sig P226/F226. I recommend printing at 0.1mm layer height, 4-5 perimeters and high infill. For assembling the plate to your pistol, you use two M2x16 screws and two M2 nuts . To put…

Walther P22 - ASA

Pouzdro na pistoli WaltherP22 - ASA

Airsoft P226 Carbine kit "Firefly"

Carbine kit for the Airsoft P226 AEP

Touch wall switch for TTP223 touch sensor module

This model is not difficult to print, but it is rather difficult to use. First, you need a TTP223 touch sensor (very cheap on Amazon) that will fit nicely in the center of the switch. Then you need to solder a 28awg wire to the sensor in…

Wall Spacer for TP Link EAP615, EAP225, EAP235

This adapter gives you more room to mount a TP Link EAP615 to a wall outlet. It is designed for M3 brass inserts. You need 2x m3 inserts and M3 screws, to mount the bracket from the Accesspoint. The Screws to screw it on the wall outlet…

Dell AC511 P2219H monitor mount

This is a VESA mount for the Dell AC511 soundbar, intended to be used with the Dell P2219H LCD monitor. The adapter was inspired by sunny_raven's design but is a complete redesign from scratch made to fit the smaller Dell monitor. This…

Mounting plate for TP-Link EAP EAP225-Wall / EAP235-Wall

I've lost one of my mounting plates during moving houses. Unfortunately TP-Link doesn't sell these as a seperate products nor were the able/willing to send a spere one. (I've read that TP-Link US does ship spare parts, TP-Link Spain…

Touch sensor TTP223 for fischertechnik

Enclosure for TP223 mini touch sensor modules with a 5mm fischertechnik building block form factor. For assembly, simply solder a male or female 3 pin header in a horizontal position to the module and slide it into the enclosure's slot…

Sig P220 Legion gas pedal

Gas pedal I designed for my Sig Sauer P220 Legion 10mm pistol. Mounts to the picatinny rail with 6-24 x 1-1/4 screws. Also a pic rail that can mount to the bottom, I use for my MantisX sensor. Category: Sport & Outdoors

Abdeckung für Philips Kaffeevollautomat EP2200

Der Deckel passt auch den Philips Kaffeevollautomat Serie EP2200

Wall Spacer or Corner Mount for TP-Link EAP615, EAP225, EAP235

printing works with nozzle size up to 0.6mm and layer height 0.32mm spacer can be fixed to wall with screws or double sided tape using the flat area flat wall model does not need supports for wall corner models the use of automatic…

TP-Link Omada EAP225-Outdoor 1/4" Mount

This is a custom mount for the TP-Link EAP225-Outdoor to mount it to camera screws (1/4") It uses a brass insert for the thread, I am using these and a solder iron to melt those in: https://de.aliexpress.com/item/1005002616584183.html…

IKEA TRIXIG P2201 mount for SKÅDIS

Beschreibung Diese 3D-gedruckte Akkuschrauber-Halterung ist die ideale Lösung für Heimwerker und Profis, die ihren IKEA TRIXIG P2201 Akkuschrauber sicher und griffbereit verstauen möchten. Mit einer präzisen Passform und einem stabilen…

PHILIPS EP2231 Anti Vibration Feet

Anti Vibration Feet for PHILIPS EP2231 Coffee-machine. Makes it a lot more quiet. Printed with PLA. Supports recommended.

PCI bracket for Quadro M2000 P2000 P2200

Full height PCI bracket for the Nvidia Quadro M2000, Quadro P2000, Quadro P2200 and likely some other Quadro based cards like PNY Quadro cards with 4 ports Related part numbers: 846379 844223-001 I needed this part because my card was…

Philips EP2220 (EP3243) Kaffemaschine_Verschlusszapfen

Der Bohnenbehälter verstopft immer die Schraube des Shredders. Für die Demontage bei Problemen immer ein Gefussel.

SIG P220 / P75 Speedloader

A simple speedloader for the Swiss military 9mm pistol P220 / P75 with single stack magazines. Possibly works for P210 as well. Print as is standing on the cross without support.

Walter P22 Magazine loader helper

just something to help load magazines

Speed loader SIG P220

Speed loader SIG P220 Print on the back without support. After the print remove the pseudo support under the pin with a pliers or a cutter.

stand for P226

Hier mal ein einfacher ständer für die P226. Der Ständer wird in die Grundplatte geleimt.

TP-Link EAP615, EAP225, EAP235 Wall Spacer for "outdoor" and optionally with mounting for a security camera.

I wanted to put this AP outdoor, even though it's not outdoor rated (do it at your own risk, of course), the place where it's mounted already has a roof, to it will not rain on it, but this mount will protect it even more. I've also…

LED Lenser P220 Bicycle Lamp Holder

I designed a handlebar holder for a LED Lenser P220 lamp. I used M4 nuts for mounting. For customizing I also added the Freedcad file Update 22.11.23: I updated the upper part of the barholder and the Freecadfile.

KWA P226 Magazine Follower (Airsoft)

A follower for a KWA-style P226/M226 magazine. I used PLA, but PETG would be a better choice. Recommended Print Settings Material Nozzle Layer Height Strength Supports PETG 0.4mm 0.1mm 100% infill Yes

Euro Module faceplate for BG Storm WP22 IP66 Waterproof box

I had the need to install a waterproof (IP66) RJ45 outlet outside, there was not a lot available that was easily affordable. I found BG Storm IP66 outlets (see https://www.tlc-direct.co.uk/Products/BGWP22.html) for a reasonable price. For…

FMAG P226 FOR FROG ENGINEERING GBB PISTOLS

Brand new model of magazine for Frog Engineering P226 (TM system) HPA converted GBB pistols!!! Details can be found here:

TTP229 Keyboard overlay

Found its a bit tricky to touch the tiny pads on the TTP229 without mashing adjacent ones so knocked up this little overlay to help. Might make some different ones yet. Added the rsdoc for designspark mechanical if you want to edit it,…

Keyguard for Dell Chromebook 11 P22T

The Dell Chromebook P22T has a keyboard design that is different from most other Chromebooks in that the keys don't sit down in a surrounding well. The upper tabs are thicker to accommodate the design. The perimeter is also thicker and…

Airsoft P226 TM Stand

Expositor para pistolas de Airsoft modelo P226 de la marca Tokyo Marui

p229 SIG TRIG - AIRSOFT

This will directly fit, may need slight modification to front corner edges for dual action to catch while releasing, can be done easy by sanding prior to install or hot razor knife while installed. enjoy. printed PETG on its side even PLA…

Magazine limiter for 10 cartridges SIG SAUER P226 TK-Pro

Фиксация ограничителя на подавателе предполагается с помощью гужонов (необходимо по 2 шт. на 1 ограничитель, D=3мм, L=3мм ) Для предотвращения прорезывания резьбы рекомендуется печатать из угле- или стеклонаполненных пластиков. Можно…

P224-229 12 round mag sleeve

Best printed in TPU90-95A or nylon pa12. the tpu fits better but the nylon feels a bit better. Should fit P224-229 Mags that are 12 rounds might fit 15 round with a little playing

Philips EP2220 Espresso dampers

I made these dampers for the Philips EP2220 espresso machine. I did not like the look of other models on this platform. They mute the vibrations of the machine to the worktop. I have a wooden worktop and it helps a lot. The dampers might…

TTP229 mount

Requires Brass inserts

Refrigerator drip tray replacement for WP2206670B (Maytag, KitchenAid, Whirlpool)

Inspired by https://www.thingiverse.com/thing:4682298 OEM Part: https://www.whirlpoolparts.com/PartDetail/Dispenser-Tray/WP2206670B/826974 Our refrigerator's drip tray was starting to show its age, and had calcium deposits that were…

Samsung SyncMaster P2250 Monitor Extension/Riser 30mm

German: Eine einfaches Zwischenstück für den Samsung SyncMaster P2250, damitt er die gleiche Höhe wie ein 24" Monitor hat. Der Monitor kommt so um 30mm höher. Benötigt wird eine Schraube M4x40. English: A simple adapter for the Samsung…

Batteryholder for Car Key SIP22 (FIAT Citroen Peugeot Iveco Lancia)

I made a simple replacement for the batteryholder of a SIP22 car key.

FMAG P229 FOR FROG ENGINEERING GBB PISTOLS

Details can be found here:

FE P226 228 229 TOKYO MARUI SYSTEM CONVERSION REPLACEMENT PARTS

Replacement parts for Frog Engineering P226 228 229 Tokyo Marui system conversion,all brands. TM version - WE, DE, TM, KJW version - KJW only Details can be found here: https://youtu.be/gbfvtSGgRUw

Monitor holder MSI MP223

Укороченная оригинальная ножка монитора MSI MP223. Используется для уменьшения высоты расположения монитора относительно стола. На фото слева оригинальная ножка в комплекте с монитором. Напечатанная ножка на 60мм короче оригинальной.…

UpLULA Spacer for Sig P229 magazine

This is just a remix of the UpLULA Spacer made by RockyMtnMark, to fit the p229, p224, and similar Sig mags, since the original double stack mag was too thick-walled for these mags to fit.

Maytag Performa Washer Water Spout Replacement (Water Inlet WP22001304)

The original from Maytag is a flimsy two piece design. Mine was ripped off during an oversized load. This model is one solid piece with extra reinforcement. It's not pretty but I needed something fast and this works just as good, if not,…

HPE Networking Instant On AP21 AP22 AP25 AP27 AP32 Mounts

Hi Everyone! *8/31/2026 UPDATE Vastly improved down facing mount with wall mount and pole mount option. Pole mount is also compatible with AP27 outdoor AP. I've created some additional mounts for HPE Networking Instant On access points to…

Ceiling mount for TP-Link Omada EAP225 and EAP245

I printed Mlotz' design https://www.thingiverse.com/thing:5499650 and loved the simplicity and effectiveness of it. I created this remix by adding 2 opposing screw holes at 60 mm. This way you can attach the mount directly to standardized…

M4 Mag Pouch Adapter for G18 / SIG P226 AEP

This adapter fits in your M4 mag pouch and allows to carry two Pistol magazines instead. Originally designed for the Cyma 131, it should fit most G18/SIG P226 AEP's. Printed with 25% infill, 3 walls, in PLA-CF

SKADIS TRIXIG P2212 Mount

This is a custom mount designed for the IKEA Trixig P2212 screwdriver set that attaches directly to an IKEA Skådis pegboard . It keeps the set neatly organized and easy to reach, making it a great addition to any workshop or tool wall.…

Proxxon HKP220 gluegun triggerarm

other triggerarms for glueguns did not fit on my proxxon hkp220. so i made my own. printed with 70% infill. its a snug fit but works so far!

Philips EP2223 ground coffee cover door

Philips EP2223 ground coffee cover door, without holes, step file included. printed in petg

Philips EP2231, Part No CP0989

ChatGPT says (without my warranty) this should also work for following machines: Series 2200 EP2220 / EP2221 / EP2223 / EP2224 EP2230 / EP2231 / EP2235 / EP2236 Series 1200 EP1220 / EP1221 / EP1222 / EP1223 / EP1224 Series 2300 / 3200…

Multiboard Vessel P220 and bit holder

Mounts on 2-3 multiboard "Fix points" (I was calling them multipoints until this morning, guess they've been renamed). Standard 0.2mm 15% should be perfectly fine, I used 0.12 in the pictured print. Elephants foot in the original photo…

TP223 Wled Wave Lamp

Adding a touch button on top of the lamp with no drilling

Range Rover Classic RRC ZF4hp22 inspection cover

This is the bottom inspection cover for the zf 4hp22 transmission found in most NAS LR products, the trucks ive owned have usually had them missing. Recommend printing in something oil and heat resistant.

TTI TP22 Vector optics Frenzy Mounting plate

Wasn't quite happy with the mounting plate that is included with the TP22, so I made my own specifically for a Vector Optics Frenzy

Halter Blende für hager univers Z - ZP22S

Ersatzteil Halter Verblendung für Verteilerschrank hager univers Z - ZP22S. Basiert auf Originalteil. Funktion wurde getestet. Empfohlene Druckeinstellungen: Filament: PETG V0 empfohlen, PLA (auf eigenes Risiko) Ausrichtung: wie…

Multiboard Vessel P220 and bit holder

Mounts on 2-3 multiboard "Fix points" (I was calling them multipoints until this morning, guess they've been renamed). Standard 0.2mm 15% should be perfectly fine, I used 0.12 in the pictured print. Elephants foot in the original photo…

Sig Sauer P229 22LR Slide Storage Case

I made this storage box to transport my P229 22lr slide to the range. Then I figured maybe someone wants to store a standard P229 slide so I made a shorter box as well. I printed it in PLA, standing straight up with supports (for the…

vp22 picatinny adapter(alpha)

Update. I did a test print and unexpectedly the fitment and thickness is really bad. The front can be sanded, drilled and cut to force a fit but the design really needs to be refined. The rear is even worse. I wouldnt waste filament…

DRŽÁK SICK WTV4-3P2241

Držák senzoru SICK WTV4-3P2241

Range Rover Classic RRC ZF4hp22 inspection cover

This is the bottom inspection cover for the zf 4hp22 transmission found in most NAS LR products, the trucks ive owned have usually had them missing. Recommend printing in something oil and heat resistant.

Aruba AP22 WiFi Access Point Waterproof Box (Aruba 500)

I have 6 of these AP22's scattered around my house indoors. They're amazing and give me perfect internet everywhere. The signal never quite reached the hot tub / pool area. I ran a Cat8 outdoor ethernet cable with power-over-ethernet to…

Sig Sauer P220

There are 2-3 options here and some that still need quite a bit of work as in the individual parts, but sorry no P220ST. Print instructions Category: 3D Printing

P226 mag base

0.4mm nozzle print on the back with supports for the radius top

fischertechnik stone for TTP223 Touch Switch Sensor

Basic fischertechnik stone for TTP223 Touch Switch Sensor. My color code is red for ‘normal’ touch behaviour, and black for the modules with solder-jumper ‘B’ closed (T-flipflop On/Off behaviour). I've made two models. One has the PCB in…

Dell P2210 Stand VESA 100 Adapter

My old DELL P2210 came with a proprietary monitor stand. This adapter converts it for use with standard VESA 100 monitors. There is a standard (5 mm) and extra thick version (10 mm) attached - I only printed the standard version as it is…

Sig Sauer P226 / P228 / P229 One Piece Grip Removal Tool

This tool inserts into the magazine well of a Sig P226, P228 or P229 pistol to ease in the removal of the 1-piece (E2) grips. Just insert until the tip of the tool touches the bottom of the slide and twist to pop the grips out enough to…