75 models
Remixed from Prusa printable parts for Prusa i3 MK3. I'm using the steel frame from Orballo Printing and I have not been able to find a compatible X motor mount so I made this. I just edited the scad files in order to be able to use the…
Remixed from Prusa printable parts for Prusa i3 MK3. I'm using the steel frame from Orballo Printing, I just edited the scad files in order to be able to use the stock LCD from the Anet A8. Uploaded both clean and personalized versions.
This is a rework of prusa i3 x axis. The distance between leadscrew and rod is 17mm The base for the extruder is for titan, i"m working on a bowden setup but is not ready yet There is also an arm for a switch for simple bed levelling and…
Screen support suitable for the P3STEEL chassis from Orballo Printing, with mention “Original P3STEEL” on the front (Helvetica Bold font).
Y axis endstop remix from the one in the "Anet A8 to P3Steel" conversion by karete. Adapted for stock Anet A8 endstop.
This is a remix from "Y Bar Stopper P3 Steel XL" by Hobsie. Y bar stopper for P3STEEL using stock 380mm Anet A8 smooth rods. Add a washer for better stability. My PRUSA I3 STEEL frame is from Orballo Printing.
Esta es una modificación del modelo "Universal BTT SKR V1.3, V1.4 y V2" con insertos roscados de Juan Puchol, manteniendo todas las ventajas y propiedades de su modelo original, como módulo para Raspberry, compatibilidad con Caribou…
Raspberry pi Zero (W) case with camera. Holes for 2 x usb, hdmi and SD card. I also added another bottom cover (V3) with additional parts which can be mounted on a P3STEEL prusa printer. You can use a combination of the parts you like. I…
This is a remix of toolsons mk2 Y idler mount, now working with 3mm gt2 idlers. Made for p3steel v4.2 by Makergal Print instructions Unassociated tags: P3steel v4.2, toolson mk2 Category: 3D Printer Parts
Designed for 8x22x7 bearings and the Orballo frame. I've created two version, one with a 12mm and one with a 10mm thread shaft. 8x22x7 bearings: http://s.click.aliexpress.com/e/Dlk7ligu Print instructions Rafts: Doesn't Matter Supports:…
The Motor Mount is designed to damp the vibration of the Nema17 Y-Motor. It is designed to be printed in PETG. Print instructions Print with a linewithin of 0,5mm in PETG with Support. Ther are two versions. With one you can mount the…
Strain relief for RepRap PCB Heatbed on a p3steel frame.
Irobri's P3Steel v2.01 redesigned by Paciente8159 (v2.2) This a redesign of irobri's near perfect P3Steel 3mm steel laser cut v2.01 3D printer I actually have one ( and I love it ) an these changes reflect some of the things I would like…
P3steel electronics box. Print Settings Printer: P3steel Rafts: Yes Supports: Yes Resolution: 0.3 Infill: 25% Filament: i don't know abs Black Category: 3D Printer Parts
This is a Y Axis P3Steel V4.2 MakerGal Motor Mount that secures the motor against bending because of tensioning the Y belt. Print instructions Unassociated tags: p3steel v4.2 Category: 3D Printer Parts
You need two of those + two M3 Screws. The upper one is going to be mounted upright and the lower one the other way around. Print Settings Printer: Kodama Trinus Rafts: No Supports: No Resolution: 0.2 mm Infill: 20 % Category: 3D Printer…
These are plastic parts to hold up the T8 trapezoidal screws centered thanks to a 608ZZ ball bearing. These parts are suitable for version 2.01 of the p3steel frame and others if identical. Make sure of the shape of the metal parts.…
Hi, I am building i3 printer and I am a huge fan of Orginal Prusa i3 design. I created the electronic enclosure for my Orballo p3steel v4 frame base on Prusa Ensi enclosure. About enclosure: It is created for Printrboard Rev. D electronic…
This is A Sinterbronze bushing mount for 10mm rods, made for makergal p3steel v4.2. Idea based in the toolson mk2 Y sinterbronze bushing mounts Print instructions Unassociated tags: toolson mk2 Category: 3D Printer Parts
Final version of my MKS TFT28 case. I'm building a P3steel from orballo printing with a MKS sbase v1.3 (smoothieboard clone) and a MKS TFT28. BTW great MKS TFT28 design from majurca https://github.com/majurca/MKS-TFT28-NEW-PICTURES MKS…
simple bolt on spool holder for the p3steel. Print Settings Printer Brand: RepRap Printer: P3Steel Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 50% Category: 3D Printing
Optical endstop mount Y axis for p3steel 4.2 by makergal Print instructions Unassociated tags: p3steel 4.2 Category: 3D Printer Parts
Case for MKS Base board on P3Steel printer. Mounts on the left (as seen from the front) PETG or ABS recommended. OpenSCAD source included Category: 3D Printer Parts
I was in need to replace my weared off 3D-printed idler pulleys, the ones i got for replacement have Ø5mm bearings and are a bit wide for Toolson's idler so I've remixed it. First of all, I've widened the pulley receptacle to accomodate…
Toolbox / sidebox for the P3Steel
I needed a phone mount for my printer so I could stream the video to anywhere in the world, so I made one! This is designed for a Prusa i3 P3steel, with a LG L5 mount. Customize this for your own phone or video recording device! of…
This is a remix of http://www.thingiverse.com/thing:532424 My part touching the ground of the P3Steel front and back plate was a little bit smaller (about 25mm). Also the original one could move freely. I made it more tight, so it won't…
This is a small Clip that Holds the Y Rods in place and prevents them sliding back and forth. PETG or ABS recommend Print them hot and with 100% infill, 0.4 nozzle @ 0.48 extrusion width = 1,5mm / 3 outlines/Perimetershells Solid top and…
Reduce vibration/resonance passed through to your table. Print Settings Printer: P3Steel Rafts: No Supports: No Resolution: 0.3mm Infill: 10 Notes: Rotate it 90 degrees before printing of course ; ) How I Designed This ===================…
long and short version prusa i3/p3steel x axis endstop holder Print Settings Printer: big printer Rafts: No Supports: No Resolution: 0.26 Infill: 40% Category: 3D Printer Parts
I've downloaded & printed the great and simple "P3Steel - E3d V6 bowden dual extruder mount" by outcastrc. The problem I found is that the air wash, that flows though cold-end, go downwards after getting trapped between the X-carriage and…
This is my remix of the P3Steel X and Z axis parts that originally came with my with my printer. The main goal is to eliminate z-wobble effect that I was suffering after 7~8mm of printing height. The printing quality is now insanely…
He creado estos dos soportes para sujetar la bobina de filamento usando una varilla de 8mm Aquí el adaptador para la bobina de PLA ESUN http://www.thingiverse.com/thing:1316430 Category: 3D Printer Accessories
Simple mount for proximity sensor target. It was designed to be light weight and secure. After printing all that's needed is to find circular piece of metal 1-2mm thickness and glue it or friction fit it on top of the mount. It should be…
Piezas de la SteelV4 diseñada por Alvaro Rey y Daniel Torres Estas son las piezas del diseño original Podréis encontrar el marco a la venta aquí: http://www.makergal.es/product-page/marco-p3steelv4 P3steel V4 pieces designed by Alvaro Rey…
I just liked the simplicity of the original design of AnthonyQ so i made it screwdable to a p3steel chasis, also, i dont like "barriers" on the fans, so i remove that part for a better airflow and less noise. Category: 3D Printer Parts
J'ai conçu un diffuseur led RGB Neopixels ainsi que la coque arrière qui accueille le pcb Adafruit Jewel pour s'insérer dans les triangles du châssis de la P3steel (orballo version - 3mm d'épaisseur). J'ignore si c'est compatible avec…
I needed a solution to mount my Einsy Rambo board to my p3steel frame and this is what I came up with. You will need to print 4 of the board mount standoffs to offset far enough. Hardware I used to mount: M3x20 (Qty 4) For mounting…
This is a remix of the " P3steel 2.x - RAMPS offset mount " by Toolson for a RAMPS/MEGA board, but specifically for a 2.5 DXL laser cut frame which seems to have it's electronics mounting holes in a slightly different configuration than…
You are better off using the original design, and getting the shoulder bearings that Toolson used! I see I posted photos of the original design I used meshmixer to fill the 6mm holes in the X-axis belt tensioner from toolson. I used the…
This is a simple mount for the Bigtreetech TFT24 v1.1 Case by Jinhyuk. Whith this mount it can be easily attached to the front a P3Steel Frame. Print Settings Printer: A8Steel 32x Custom Rafts: Doesn't Matter Supports: Doesn't Matter…
This was the solution I designed to prevent bed shaking during acceleration movements and also get a fixed auto level solution (no need for software auto level) while still keep the spring suspension protection that was originally…
This is basically a modification of the DeltaPanel by scottmayson to mount the Smart Controller ( http://reprap.org/wiki/RepRapDiscount_Smart_Controller ) board to the front of the P3Steel chassis. The knob included here is exactly the…
This is an alternative for centering the top of the Z axis threaded rod tor the P3Steel frame. My frame is from Orballo, and it has a hole on the top for passing the threaded rod through, it is 12mm in diameter. My threaded rod is 5mm. I…
A simple spool holder for a p3steel style frame. I used some all-thread and miscellaneous hardware to assemble it.
simple filament guide for the p3steel Print Settings Printer Brand: RepRap Printer: P3Steel Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 30% Category: 3D Printer Parts
This is a case/cover I made to mount my mosfet on the wall of P3Steel printer. This way the electronics are somewhat protected against things. Case made in OpenSCAD, thus it is configurable. Category: 3D Printer Parts
Z axis endstop for fixing to Z axis rod.
I adapted Toolson's great design to accomodate the 624 bearing that matches the belt pulley more closely. The mount points are also 1.5mm closer together to match my P3Steel.
I've mounted a 60mm high torque NEMA17 motor on my P3Steel y axis. However the toolson designed lm8uu clamp hit the back of the motor, which is mounted on the right side as seen from the front. On the y carriage I threaded the left side…
I liked the design of this Duet3D Wifi Controller Box https://www.thingiverse.com/thing:2481027 but was struggling to find a suitable way to attach it to my P3steel frame (Orballo printing 2.5). This is my solution. Intended to be…
Soportes para colocar luces led en el marco de la impresora HTA3d P3Steel (Basada en la Prusa i3 Steel) o en la impresora HTA3D 3DSteel. Las luces son focos led de 58mm de diámetro por 8mm de altura. Lleva un hueco en el interior para…
This is my dual spool holder I designed in order to keep everything mounted on the frame. It is mounted using four screws M3 and a M8 threaded rod for holding the spools. I strongly recommend using PLA for the printing. Category: 3D…
Due to my setup, I prefer to have a filament spool holder on top of the printer instead of the LCD screen suggested by the original designer. This is the reason I designed this model by reusing the existing parts. If you own this printer…
.... needed to pop a few lights on the p3steel just to jazz it up a little so this is it :) im not the best at designing so i have included all files i worked on so others can change or modify them. i used the cheap strip led's that come…
Filament guide for prusa i3 steel. You have to place a m3 nut at the triangle and screw the guide in place Print Settings Printer: P3steel Rafts: Yes Supports: No Resolution: 0.25 Infill: 25% Filament: i don't know abs Black Category: 3D…
Z endstop mount, from the base of the motor to the top of the mount is 40mm, I used it for a P3Steel, printed on PETG 25% infill.
I got tired of my blades, hex wrench and tweezers lying on the table, so I whipped this up. Hope it helps you as well! Holes are 11mm and 8mm for exacto blades, with a small hole for a 2.5mm hex wrench and a utility slot for tweezers.
This is a plate that mounts to the back of my P3Steel X-carriage for securing the GT2 belt. This allows me to mount my hotend in the top slot and still keep the belts aligned correctly.
C'est un remix du corps de l'extruder l3kv2 adapté au chassis de la p3steel. L'arrière de l'extruder ou le moteur pas à pas est fixé vient cogner dans le haut du chassis lors de l'impression des pièces plus hautes. Cette version ajoute 5…
Print the same model up to 4 times to have more compartments. No screws/nuts required to assemble it. Print it with supports. TODO: Add a cover
This is my first design its just a simple remix of http://www.thingiverse.com/thing:602513 Category: 3D Printer Accessories
I moved to a new place on my own, and needed a simple, painfree and good-looking handle so I could transport my printer easily on public transport. I came up with this design, which utilizes four of the mounting holes in the top of the…
p3steel switch mount for a 13x19mm rocker switch Print Settings Printer Brand: RepRap Printer: P3Steel Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.26 Infill: 30% Category: 3D Printer Parts
Mounting bracket for mounting an extruder at the top of the Z-axis of a P3Steel. Extruder can be mounted horizontally or vertically.
This swivel mount sits at the top of the P3Steel and is designed to mate with the full graphic LCD case at http://www.thingiverse.com/thing:195369 Needs 2x M3x16 bolts and nuts
A versatile filament spool holder designed with a threaded shaft and two internally threaded cones, allowing it to fit a wide range of spool inner diameters. The design uses bearings mounted at both ends of the threaded shaft to ensure…
I remixed this design https://www.thingiverse.com/thing:1959775 as it did not quite line up how I wanted it to. Just added some slots instead of holes for the fixings and the overall length was changed. Should you wish to adapt this to…
On my p3steel I found that after a while the front and rear had started to bend due to the belt tension and the belt would move this part has worked a 100% and now there is no more bending and the printer is a little less noisy it must be…
Simple p3steel/prusa i3 anti wobble nut holder. It is designed to fit a M5 connector nut. From my quick tests it seams to work very well. Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: No Resolution: 0.28…
This swivel mount sits on the Z-motor of the P3Steel and is designed to mate with the full graphic LCD case at http://www.thingiverse.com/thing:195369 You will also need the flat half of my other swivel mount at…
This will lock the spool holder rod in place. The rod will easily fell off. Made for PS3Steel from HTA3D. It will click in place. Mirror the part with the slicer software before printing for the second one. Category: 3D Printer Accessories
P3Steel Kitprinter3d PRO XL (200x300) Front Panel
These are plastic parts to hold up the T8 trapezoidal screws centered thanks to a 608ZZ ball bearing. These parts are suitable for version 2.01 of the p3steel frame and others if identical. Make sure of the shape of the metal parts.…
