Counting matching models…
Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model . For a great model to add even more drives in the optical bay, check out this model . I have created a hard drive cage…
Here's a purpose-designed bracket to interface with the spring-loaded optical drive pins to add hard drives with some cooling. The other designs were very restrictive and I didn't even try them for fear that the drives would overheat.…
*Vastly updated version: https://www.printables.com/model/725578-lenovo-thinkpad-p15-and-p52-laptops-under-deskshel *Added .STEP file for editing :) This bracket set will allow a Lenovo Thinkpad P52 laptop to mount under a desk or shelf.…
*Added .STEP file for editing, enjoy! Designed this to store away my work laptop when I'm done for the day to clear space so I can slide-out my personal keyboard+mouse. My configuration allows to keep the laptop connected to power, USB…
Shelf system for mounting a Lenovo P520 in a standard data center cabinet. The P520 will take up just under 4RU when used with these brackets. I've printed in PLA and ABS. There is slightly less deflection with ABS. Print two of each…
This is a saw blade holder for Ryobi P524 Jigsaw. While this saw has 2 blade slots in the bottom plate cover, I wish to store more blade on the saw, hence made this holder. You will need remove 4 screw to open up the bottom plate before…
Wallmount for decoder VIP5202 of Arris
This is for the Lenovo P520 Workstation drive slots for an additional two 3.5" drives, printed without supports You need to use M3 insert Brass to secure it on the case to prevent any movement. choose the insert from the like blow, the…
It has matching holes for power and thunderbolt for P52.
Lost the battery cover for one of our remotes, so I created a new one. Has reasonable parity, strong fit. I printed at an angle with the rear edge flat on the bed (hence the significant scarring), but on its side should also be good.
Vertical Stand for Thinkpad p52 with the screen close. -Improve Cooling -The P52 will not slide out to the sides. Solid stand... Printed face down, 15% infill
Wall bracket for Fiskars pruner P521 and all other with similar blade shape. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Filament: Prusament PLA Black…
Brake Caliper Adapter 'Dog Bone' To fit a AP racing CP5200 Caliper To suit a Mazda MX-5 Miata NA/NB Spacing to use a DBA 5040.1S rotor. I've included the f3d file so you can tweak/adapt to suit your need.
A wall mount for the Arris VIP5202 set-top box, known as the former (2021) set-top box of KPN, (4K version, not sure if this matters). Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The…
A container for AAA batteries and rechargeable batteries. Available in versions for 2, 3, 4, 5, 6, and 10 pieces. Super lightweight and compact. Takes up almost no space. The locking mechanism is based on the shape of the box and the lid.…
A container for AA batteries and rechargeable batteries. Available in versions for 2, 3, 4, 5, 6, and 10 pieces. Super lightweight and compact. Takes up almost no space. The locking mechanism is based on the shape of the box and the lid.…
Modification of ByteDeluxe's battery cover to work on a P52s I shifted over the connector area and removed the brackets
For Hager ZP52S univ.Z 🇬🇧 The door knob on our meter cabinet has always been defective. Since we live in a rented house, an expensive replacement was out of the question. The owner sees no point in a repair, so I have created a simple…
A 3d-model to mount the Benq GP520 projector to the ceiling
I had to redraw everything, but it's still a remix, thanks to the author for the idea.
Holder for TPLink UP525 25W 5-Port USB Charger
This design replaces the removable chip tray of this Kangaro DP520 paper punch : https://kangarokgoc.com/Home/ProductDetails?ID=40&CATID=2&CatName=Paper%20Punches I print it in hard TPU ( shore 53D), softer TPU will be fine too. Add…
This version of the lever has been altered to make the part that contacts the electric switch slightly larger because we found the original was too small to reliably start the machine. We printed in PETG, 100% infill. Supports required.
Lenovo P52 simple stand Laptop. V1 super simple V2 with holes 1--> 4 hole on the bottom for mounting on specified place (and water flow away) 2--> 4 hole on the sides to put the usb-C cabel in, if the laptop is away. Don´t hesitate to…
This is a simple, quickly-modeled holder designed to mount a ThinkPad P52 onto an IKEA Skådis
Cagiva Mito EVO / SP525 / Planet / Raptor 125 – Upper & Lower Chain Sliders 🇩🇪 Deutsch Neu konstruierte Kettenschleifer für verschiedene Cagiva-125-Modelle , vollständig in Autodesk Fusion 360 erstellt. Die Konstruktion basiert auf…
Lenovo P52 holder Laptop for 30mm diameter bar It will work like the screen vesa holder for the bar (d-30mm). Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message.…
A box for the high voltage probe. The key feature is the cutaway at the bottom. These probes have cables coming out of both ends, which makes it not a good fit for a standard box. Updated design which has holsters for probes, oscilloscope…
Adds 3x GPUs to a Lenovo P520 workstation. You need 2x of the base models. Use glue to put the part together. I use 2x 20cm riser cards. Needs power splitter.
A box for the high voltage probe. The key feature is the cutaway at the bottom. These probes have cables coming out of both ends, which makes it not a good fit for a standard box. Updated design which has holsters for probes, oscilloscope…
Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model . For a great model to add even more drives in the optical bay, check out this model . I have created a hard drive cage…
Vertical Stand for Thinkpad p52 with the screen up. Print two of them. Perfect fit on P52. Printer brand:Creality Printer:Ender 3 Pro Rafts: Doesn't Matter Supports:No Resolution:0.2 Infill:10% Filament brand:3D Solutech Filament…
This is a printable model od processor in TQFP52 case Printing times with structure - 79g : 3h26m = MK4 4h44m = MINI/+ 6h41m = MK3S/+ Printing times without structure 67g : 2h37m = MK4 2h59m = MINI/+ 4h53m = MK3S/+ Version 1: Processor…
