11 models
Print this and it's mirror and bolt together using Tronxy's original hardware plus 2 m3 screws and nuts. Get the other parts from https://www.thingiverse.com/thing:2149867 Print instructions Category: 3D Printer Parts Print Settings…
Frame braces I made for my Tronxy P802E that got rid of most of the wiggles. I made some revisions to a few parts after making the ones that are on my printer so some will look a bit different then in the photos. The braces on the front…
Having the bed shift on the wobbly springs mid print is very annoying so here is my answer. A cup part on one end and a post on the inside on the other. This tightly constrains the spring while still allowing plenty of adjustment range.…
I needed replacements for my mounts that were slowly deforming in my heated enclosure(40C) due to them being made from pla. Also, as is standard for Tronxy, the mounts came with warping by the threaded bushings that required me to shim. I…
For the S-240-12 model psu. Printed at 100% infill and .3mm layer height. Recommend to print upright with 10% support. There are different power supplies that come with these printers so look at the pics and make sure you have the same…
The parts that came with the printer to hold the smooth rod were pretty mickey mouse and couldn't be tightened neatly without shimming due to the rods sticking above the frame quite a ways. I left extra room above the rod and added…
When the extruder is mounted on the left side, the lever interferes with the x motor at the top of the print range. This plate shifts it away just enough. Print instructions Category: 3D Printer Parts Print Settings Rafts: No Supports: No…
I needed an easy way to mount the e3d v6 clone I purchased for my p802e so I made this. I used this cooling fan adapter https://www.thingiverse.com/thing:506958 , however the blue one that comes with the e3d v6 might also work but is…
Replacement part I made for Tronxy p802e extruder plate copying the dimensions from the original. Hasn't been tested yet, but if you make one post a pic and let me know how it works! Category: 3D Printer Parts
I modified the corner bracket of pheneeny's AM8 to be able to mount the extruder like it was mounted on my Tronxy p802e. After a year of loading filament into it, i didn't want to change my technique, lol. Enjoy! Category: 3D Printer…
Extended the mount to allow room for my cooling fan. Update: split the model to make it easier to print, then it can be glued together for use. Category: 3D Printer Parts
