Counting matching models…
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…
Print info Nozzle: 0.4 mm Infill: 0% Supports: I use Snug supports, need to be painted like on the picture below Model Overview Two versions of Cats: Normal (white one) , Fluffy face (black one). Made bumps on face and paws so its easy to…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Inspired by Sneaks awesome vise model I designed this miniature holder for painting. This mechanical concept makes so easy to attach and release miniatures with different base diameter or shape (square, oval…) although is best for round…
A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…
This petite paint palette was thrown together when I ran out of 3D rubble to use as a palette. Designed to shorten the distance between paint and a held item, it has worked great for all my acrylic mini painting. It’s a quick print that…
Use 3 walls, 25% infill. A simple drill-powered mixing attachment designed for stirring paint, coatings, resin, pigments, adhesives, and similar liquids directly inside cans or containers. The mixer attaches to a standard drill and helps…
This is a two part stirrer, the stirrer itself and the shaft. You'll need an m5 bolt (40mm or so) to screw the stirrer into the shaft. You can customize the shaft length by non-uniformly scaling the X axis longer. I printed the shaft…
🇪🇸 Benvinguts a Barcelona! Welcome to Barcelona! One of MiniWorld3D's most popular models is now on Printables! Our Sagrada Familia model has been printed by makers all around the world for more than 5 years. This model comes in two…
The original model needed support in the eye holes in my experience, so I made the eye holes the bare minimum depth. I also have included the multicolor painted file for Bambu Studio in case you want to print it with different colored…
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
The following sizes are currently available for download: Width Height 3 2, 3 5 2, 4 7 4, 5, 6 9 5, 6 I recommend to fill the bottom with plaster, which makes it much more stable (that's why there is a hole 😉. And some small rubber feet…
Supports are not required! You have to mirror the given stl in order to get both halves. Do not print it the same way twice. You can print them in an interlocking formation to save room on the build plate. (see picture)
A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 20mm strap 25mm…
You can find @ericd545's original design here: https://www.thingiverse.com/thing:3855571 Used PrusaSlicer's organic supports on this print to keep the points nice and pointy. TBH I'm not sure if they're necessary, but I'm very happy with…
Body hinge requires widening the hole to 10mm. Door hinge to 8mm. The screw spacing in the door plate is 45mm, and the offset relative to the box axis is 9mm. The screw spacing in the body plate is 32mm. The thickness of the tiles is…
Rose – Paint-It-Yourself Figurine A blank, matte-white model of a classic rose, designed for personal painting and decoration. This DIY collectible blends timeless elegance with a minimal, smooth form—perfect for creative projects, gifts,…
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
I transformed Hello Kitty into a paint brush holder for my roommate. Supports needed. Pictures show 100% scale with general paintbrushes. I printed her sitting up. Please message if you have any issues :) This model was inspired by the…
Painters triangle (or painters pyramid) for holding work off a surface while applying paint or finish. Can fit at least 8 on a prusa mini at a time. They print quickly and easily. Triangles are also stackable for easy storage.
The X01 Power armor from here: https://www.thingiverse.com/thing:1284097 Repaired using MeshLab and Microsofts Repair service. Category: Creatures
Here's my take on the painter's pyramid. I've designed it in three sizes, measured by the long edge of the triangle. The design is meant to be 3D printer friendly such that you should not need supports to print this. Update: I printed 6…
I wasn't satisfied with other existing paint storage designs - either they took too long to print, or seemed more appropriate for laser cutting. I designed my own with a goal of making it simple and quick to print. Fits Vallejo 17ml…
Just a really quick stackable paint cup - no fuss . From LINSLABS, great for airbrush paint or otherwise. Please do not re-upload this model, it's already available on every platform. This is my original model 😇✌If you'd like to support…
I reworked my office recently and added a couple IKEA Skadis pegboards. I've been using and loving CSD_Salzburg's Skadis set and decided to make some more custom pieces for specific needs I have. One of which is to hold my mini paints in…
Intro I couldn't find a suitable hand vise/clamp for painting D&D/DnD miniatures and other resin prints so I designed this one from scratch. It works very well, especially for terrain and odd-sized prints, plus it's a great PCB clamp for…
UPDATE : 08/02/2024 - Fixed the closed rails on Vallejo 1x5 module and removed holes on bottom part of the vallejo modules I wasn't happy with the models available to organizer my paint bottles, I decided to create my own design with this…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I don't always need a complete set, but just individual pieces because I need to replace parts or want to print parts…
These are replacement clips to fix broken ethernet cable clips. The clips attach to the Ethernet cable and replace the broken clip so that the cable stays locked into an Ethernet port. EDIT - For some reason Simplify3d doesn't like this…
Added a corner piece that will work for both the left and right corners, no supports needed. hollowed for less material
Space efficient Skadis paint bottle holders that create honeycomb layout on the wall and perfectly tessellate. They are made for four groups of paint bottles: Paint dropper bottles as produced by Vallejo, Army Painter, AK, Reaper, etc.…
This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…
Petite Palette – Deep Dish is an upgrade to my old Petite Paint Palette. They sit comfortably on your hand and come with 1, 3 or 5 deep dishes for big globs of paint. Left and right-handed versions are available. A slip fit lid is also…
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
These painter’s props (also called painter’s pyramids) let you elevate your workpiece while painting, staining, or finishing. The small pointed tips minimise surface contact, allowing you to work on both sides without sticking or marking.…
After printing out some miniatures on my printer I remembered how much of a pain in the ass it was to hold them while painting. So When I was searching for miniature painting handles I found https://www.thingiverse.com/thing:2669896 and…
Cleaning your rain gutter can be difficult if your ladder is too short to reach the roof. Therefore I created a little scoop (or shovel) that can be mounted on a (telescopic) Gardena stick. The angle can be changed in two directions…
The attached 3MF file includes a model painted in Prusa Slicer 2.4 that requires a multi-material printer with support for at least five filaments at once (it's designed for the Prusa MK3S with the MMU2S upgrade). There are four ganged-up…
A small Paint Mixing Tray for modelling complete with Brush Rest/Holder. Size 105mm x 50mm. The one in the picture is scaled 20% bigger in the slicer and printed with 10% infill. Addition 27 Oct 2023. added a larger version (130 x 80mm)…
Finger painter badge designed with the paint separated for printing with colours, dab of glue on each finger for a perfect finish If you want the silver colour change make sure to setup a filament swap
Update 10-1-2024: Added “offset” tiers, to stagger the location of bottles (as suggested by @Xellixor on Thingiverse). New version 3 with screw-based, more robust locking mechanism is now available on the Prusa Store . Version 2 is and…
There is a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers! patreon.com/dakkadakkastore myminifactory.com/users/DakkaDakkaStore?show=tribe Battle Brother consists of 4 parts. 2 versions of files are…
An improved version of the 3D printed spray paint can handle. Optimized specifically for Behr Premium spray paint cans, may be compatible with others. Similar to other improved versions, it uses screws to clamp onto the rim of the can,…
Lots of different tip sizes to meet your Diamond painting needs. The 1x7 tip is my personal favorite. The 2 wide tips will need a custom tray, not sure how practical they are, but experimenting with them.
Original Pair of owls comes with the anycubic i3 mega s
Modular Vertical Paint Rack This paint rack system is targeted at those who are looking for something customizable that can be changed down the line by swapping shelves out and removing or adding tiers. It was designed for ease of…
You can put them on the handlebars in the normal position and turn the bicycle afterwards. They are designed for the handlebar with a diameter of 23 mm . I printed them with 4 perimeters, 15% honeycomb infill, without top and bottom…
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…
A simple tetrahedron which can be used as a paiting cone / painting stand. All four sides are equal, so they can be used in any direction. I would recommend to sand the contact points perfectly flat to avoid any imprints into the wood /…
4 Color HueForge model. Han Solo Carbonite filament painting made using Sunlu PLA+ colours. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Filaments Used: Sunlu PLA+ Black Transmission Distance: 0.6 Sunlu…
Hi, after looking through the available miniature painting handles I decided to design my own. I tried to make it as minimalistic and with as few parts as possible yet still providing a firm grip on the miniature base. The internal thread…
A blank, matte-white model inspired by the timeless art of bonsai. This DIY collectible distills the quiet beauty and meditative balance of miniature trees into a smooth, minimal form—perfect for slow, intentional painting and peaceful…
SKADIS Citadel Paint storage solution Two versions, one with 6 bottles and one with 7 bottles. Combined they fill a full row on a SKADIS board supports required, see 3mf file
This is the official Ultracryl paints bottle rack. Ultracryl paints are still available on Kickstarter through our “Mail for late pledge registration” button. Its modular and can be built in many ways, also it's LED-Strip capable with a…
You just need to glue the Ballbearing outer Ring into the Turntable Part and the Bottom Part into the inner Ring of the Bearing. The Turntable has multiple 3mm Holes to put some sticks with parts you want to dry after painting. Also it…
🧰 Screw Organizer Box for Repairs & Disassembly 📦 Description This 3D-printed screw organizer is designed to help you keep screws, bolts, washers, and small components neatly sorted while working on electronics, machines, or furniture.…
These are various holders for miniature / acrylic paints. 25mm (Vallejo, Army Painter, …) 33mm (Citadel / Games Workshop) If the need comes up for myself, I will add other sizes as well in the future. If you want to change them yourself,…
Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…
Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…
A sudden disappearance of 4 hours of my life. I painted the Crystal Dragon in Bambu Studio, hopefully saving you some time. I recommend printing with flushies, and also printing 2 at a time. Would not recommend scalling down. Flush model…
The great idea of the dry brush add-on for The Army Painter palette got my attention - since i was not satisfied with the provided models, i came up with my own solution. There is some headspace under the lid of the palette, which is…
Paint storage to be used with RostaP's Honeycomb Storage Wall. https://www.printables.com/model/152592-honeycomb-storage-wall Stores 15 paint bottles, I designed it to snugly fit standard Vallejo dropper bottles ( Around 24.5mm ⌀ ), but…
to assemble you have to use m3 x 10mm screws
[First, let me offer you something fantastic] I've released 22 fantastic customizer programs "Amazing STL Creator". Try them out. Create STLs that will amaze your friends. Right now is the best time to get all my programs. Get the entire…
A functional replica of the Steam Deck Repair jig seen in Valve's Steam Deck Teardown Video . Handy for keeping the Deck stable while upgrading the internal SSD or replacing drifting thumbstick modules. This is a remix of ryohazuki224's…
Swan, with a small support built in to hold the nose without any extra supports needed
This model is based based on Zack Freedman's Gridfinity storage bins, and allows you to organize, store, and stack Citadel paint pots. Source fusion360 file is also available in the download, if you want to make any custom sizes. Coming…
Tips are appreciated and go towards creating new designs A friend of mine is into wargaming and wants to organize his paints a little bit better to have them easily accessible and all stored neatly. He saw the design by Black Hussar which…
'Remix of https://www.thingiverse.com/thing:2156108/ Flattened via MeshLab, repaired and the file with "reduced" in the name is only 47,7 MB big, the other one is 137 MB and a real mess to slice Print Settings Printer Brand: Prusa…
REMIX of https://1url.cz/XKSup Thanks for great rack!!! :) Lite version, significantly reduces material cost, with same functionality :)
Just another Paint can spout. Keeps paint out of the gutter and allows more controlled pouring. Cheers Kisssys Category: Hand Tools
This is an add-on for the Army Painter Wet Palette with different forms to test the amount of paint on the drybrush before switching to your precious models. Specifically with parts and features from my fantasy ruins sets: Base set…
A painting handle for 15-25mm based models. The clips that grip the mini bases are narrow for good painting access to the underside of models. However topples over easily being so narrow, consider looking at the remix Printed at 0.2…
My new favorite design. Update to my previous painting handle but kept the bolt hole for backwards compatibility with version 2. This one doesn't require a bolt as the clip has the 3d printed thread to screw into the handle. As before the…
This mixer is designed to fit into a cordless drill and can be used to mix paint in smaller paint cans. I tested this extensively and it works great, you can nicely control that not too much air is dragged into the paint and the mixing…
Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…
These Valentine conversation heart fidgets are a ton of fun to play with! Pick a phrase or create your own with the blank version! I have tested scaled to 150% I created the smiley heart fidgets by adding text on top of the blank heart…
This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports
This holder (with the diameter of the base is 40mm) is used to attach the figure when painting.
Sea Otter – Paint-It-Yourself Figurine A blank, matte-white model inspired by the playful and peaceful sea otter. This DIY collectible captures its floating charm in a smooth, minimal form—perfect for creative painting and fans of…
Buddha – Paint-It-Yourself Figurine A blank, matte-white model inspired by the serene presence of Buddha, designed in a calm, minimal form for mindful painting. This DIY collectible invites peaceful reflection and creative…
[Update: Added another variant for "Wilton Gel Food Coloring Containers". There are now trays with these diameters: 25.5 mm (e.g. Army Painter, both standard and elevated variants), 33.5 mm (e.g. Citadel, standard variant) and 29.0 mm…
This modular container snugly fits 20 Citadel paint bottles in a 4x5 arrangement, inspired by the efficiency of milk crates. Stack multiple units seamlessly for an organized, space-saving solution. Whether you're a hobbyist or a pro, keep…
This is a simple paints holder for Skadis board. It can hold up to 7 Vallejo bottles (or similar bottles). When printing, add supports below back hooks and set infill to at least 30%. This will ensure the hooks will be strong enough.
40mm high paint cones (or tetrahedron to be precise !) that you can stack up and screw on your work surface if needed. The corner are rounded to not get stuck on the part you want to paint. If you don't need to screw them on the work…
Paint bottle holder designed to fit Vallejo, The Army Painter, and Reaper MSP paints. Each brush or tool slot has a cutout for easy cleaning if things get messy inside; it also helps fit The Army Painter triangular brushes. This model has…
A blank, matte-white model of a serene lotus flower, ready for your artistic touch. This DIY collectible captures the spirit of purity, calm, and beauty in a soft, minimal form—perfect for creative painting and peaceful decor.
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
Update 20230314: Working on another variant that sits better. Will leave this up for those that want. New variant at https://www.printables.com/model/423896-honeycomb-paint-holder Since i find…
A blank, matte-white model of a cheerful sunflower, ready for your colors. This DIY collectible captures the bright, simple beauty of nature in a smooth, minimal form—perfect for adding a touch of creativity and warmth to any space.
I created this minimalist floating Frame for my HueForge Filament Paintings. Included are the Fusion360 file and a .step file In Fusion 360 just change the user parameters “objectwidth” & “objectheight” to match your painting dimensions…
A set of wall mounted racks to hold your Citadel paint pots, or Vallejo dropper bottles. Both racks were designed to maximize the 256x256x256 build of a Bambu Labs printer, so you will need a printer at least that large. The Citadel rack…
This modular container snugly fits 30 Vallejo paint bottles in a 6x5 arrangement, inspired by the efficiency of milk crates. Stack multiple units seamlessly for an organized, space-saving solution. Whether you're a hobbyist or a pro, keep…
I designed this paint brush rack so that I can hang my brushes bristles side down so they can dry properly and prevent water deteriorating the glue in the ferrule. An important aspect I considered was ease of use – I wanted a very quick…
Thissimple mod replaces the top part / lid of yesimjess' Paintbrush cleaner. I found the screw-mechanism quite timeconsuming. So I replaced it with a leaf spring and push button assembly. No additional hardware is needed for assembly. The…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) PAINT BRUSH RACK -…
This paintbrush holder has 22 slots for paintbrushes with 9-10mm diameter handles. There are also 2 larger slots for larger paintbrushes or other painting tools/accessories. The shelves can simply be slid into place, please ensure the…
After 2 years of Warhammer 40k miniature painting and a few iterations I present the Magnetic Miniature Handling System, short M2HS. The goal of the M2HS is simplified handling of miniatures, subassemblies and finished minis too avoid…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
