Counting matching models…
Sheath for an apparently fairly common kitchen knife. Another easy and quick print. Best results I had so far was with the following orientation (+ adding a bit of brim), using the default 0.35 Layer Height profile:
I made a knife sheath for a friend who's into fishing. I didn't model the knife sheath exactly to the size of the blade, so there is some slight wiggle room, but it's otherwise nice and tight on the base when the sheath goes over the…
My Q2 fun duct melted partially. Original parts were out of stock. Search for alternatives, provided some ideas and the need to compare alternatives. In this project, I compare the original QIDI fan duct design with some ideas that built…
A navigation preparation template Include a rule in Nautical Miles, a turn radius for a 120kts airspeed, a 10° drift line.
I made a knife sheath for a friend who's into fishing. I didn't model the knife sheath exactly to the size of the blade, so there is some slight wiggle room, but it's otherwise nice and tight on the base when the sheath goes over the…
This is yet another updated version of froooch's EDC knife for use with Stanley 1992 blades. Check out froooch's original post for a more in-depth description and some good videos - highly recommended! I added a small paring bar and fuzzy…
I was tired of opening one bottle at a time, so I made a smart funnel! I created two models: one for 60ml bottles and one for 100ml bottles.
Sheath for a Victorinox paring knife (model 5.0631). Protect your blade and your fingers. Print Settings Printer Brand: MakerGear Printer: M2 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: Set your line width to 0.4mm for…
Goal was to make a magnetic sheath for a 10cm “colori” paring knife from Kuhn-Rikon . We lost the original sheath, and we were carrying the knife with a cork jammed on the tip so it wouldn't poke holes in the picnic bag. The design uses…
Orc Preparing for Battle - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in…
Customized version of http://www.thingiverse.com/thing:125109 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=125109 Instructions Using the following options: knife_thickness = 2 knife_show = 0…
So I ended up making a third one for a small paring knife from Wüsthof that was also lying about as a spare. Customized version of http://www.thingiverse.com/thing:125109 Instructions Using the following options: knife_show = 0…
I needed a way to compare one side of the z-axis level to the other side on my 3D printer as it droops when the steppers are powered off. I ordered parts to link the z-axis lead screws together however in the meantime, this tool makes it…
“foot” is 4cm Ikea Lack leg extension I needed to regain 180mm maximal print height for Prusa MINI+ below Lack table. “foot2” is 4cm additional extension I needed for placing 4cm thick concrete slab between printer and absorber (old gym…
My Q2 fun duct melted partially. Original parts were out of stock. Search for alternatives, provided some ideas and the need to compare alternatives. In this project, I compare the original QIDI fan duct design with some ideas that built…
Alien - Ripley Preparing for Cryosleep - 1979 3D printable model. Added a background, and a two versions of Ripley. Choose the one you like, delete the other, and print! Also added a plain round base if you just want to print Ripley. :)
Practical blade guard designed for Victorinox paring knives. Protects the blade from damage and adds extra safety during storage—perfect for kitchen drawers or transport. The design is lightweight, durable, and easy to print, with a…
Printable without supports oriented on the spine as shown, although build plate adhesion brim is recommended.
Sheath for the Opinel paring knife nb 112 Fourreau pour le couteau d'office (à légumes) n°112
Left and right versions allow you to have your knife on the left or right hip. I recommend planting it on the print surface the flat face down. If you have weak bed atchesion you might need to print it upright with support. Thread pice of…
This is a compact countertop knife block to keep your Victorinox Fibrox 3.25" paring knvies organized. These are fantastic little knives, they are easily sharpened, take a keen edge, dishwasher safe and are dirt cheap to replace if you…
Paring knife sheath for a Zwilling JA Henckels 3" blade. Tree style support breaks away easily and is adequate for supporting the curved end. Printed with layer height of .16
Jig to hold the hot knife as you run the foam wing through. Perfect spare placement. So far I have tested this on the Wind Catcher RC Spec wing and the Defiant Wings D28 (leading edge and tall edge). Knife is held 23mm up from the base.…
Outer length is 23 cm so this will not fit the Prusa MINI. But you can simply cut it by rotating it 90 ° on the Z axis, then slice it somewhere across the indentation, and place the two pieces again facing the bottoms down. Sand down the…
EN : This plastic part was missing and impossible to get it back from IKEA side (even after asking some salers), I decide to make it my self and here it is, just be equiped with a M5 nut to integrated it to the print after the “color…
A parametric sheath with parameters specific to the Pampered Chef Quikut Paring Knife #1250. These came with carboard sheaths which these replace. The parametric model can be adjusted if the blade fits too tight or loose based on your…
Artist: Gibson, John Period: 19th Century Material: Stone, marble Location: The Usher Gallery, Lincoln Thus it is not classical but classicistic. This model is available from several sources and it is not known which was the original one.…
Victorinox Paring Knife, 8 Cm Pointed Tip, Wavy Edge 10mm magnet 3mm thick one handed press to open or pull down or lift off magnet 2hr print feel free to remix edit i used countersunk magnet to add screw to cabinet / wall can help if you…
