P
PrintablesTweako
40mm speaker enclosure
I've remixed a nicely designed ported speaker enclosure to fit my 1.5 inch speaker with bigger magnet. I've also made a version with pins for toolless assembly.
- Downloads
- 487
- Likes
- 55
- Rating
- 5
Search results: peak
Counting matching models…
P
PrintablesBrandon R
Seadoo Spark Bluetooth Speaker Mount
This is a mount to hold a bluetooth speaker on the front of a Seadoo Spark. I designed around a JBL charge4 but it should work for just about any small or medium sized bluetooth speaker. Mounts with three m4x35 screws and three m4 nuts.…
- Downloads
- 132
- Likes
- 6
- Rating
- 0
P
PrintablesNathaly 520
Shelf wallmounted for speaker
This 3D-printed wall-mounted shelf is designed to hold small speakers securely while keeping your setup tidy. The shelf features a hole at the back to neatly route the speaker cable, ensuring a clean and organized appearance. Its sturdy…
- Downloads
- 61
- Likes
- 6
- Rating
- 0
P
Printablesenrico e
SPEAKEASY BOATS
I created this model to make the gameplay more intuitive and to help players who have limited table space. The idea is to create a ship that contains all the information necessary for the game, so players don’t have to first check the…
- Downloads
- 61
- Likes
- 3
- Rating
- 0
P
PrintablesBootjevaarder
Camera Strap Anchor - "Peak Design"
The small woven cord of my camera strap anchor broke. So I designed and printed a replacement anchor. I use it successfully on my Olympus DSLR weighting 0.75 kg. The diameter of the metal ring should not exceed 3 mm. I printed with PLA+,…
- Downloads
- 57
- Likes
- 18
- Rating
- 0
P
Printables3DprinterSebi
DIY Bluetooth Speaker CORE
CORE- a 3D-Printed Bluetooth Speaker with Dual Drivers This compact speaker uses two Dayton Audio DMA58-4 full-range drivers to deliver surprisingly powerful and clear sound from a very small enclosure. The fully 3D-printed housing…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesFluxxFox
Surround sound speaker mount
Printed at .2 layer height with PETG 4 walls, 60% infill
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesAbs soh
laser visualizer phone speaker attachment
this was made to work with https://www.printables.com/model/1056695-laser-visualizer-of-sound-waves/files. it allows me to use my redmi note 12 phone speaker as source of sound waves. my phone thickness is 7.8-8.2 mm and this works well…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablesrk3d
DJ Big Gulp - Floating Bluetooth Speaker
I transformed a Gatorade jug into a floating bluetooth speaker for river tubing. Check out my blog post for the full story! Materials Main body Igloo Sport 1/2 Gallon Jug With Hooks Pioneer 5-1/4" Speaker 12V SLA Battery Marine weather…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
Printables
Sony HT-S40R pivoting ceiling rear speaker holders
This is a remix of the following 3 projects that all contributed to creating what I needed: https://www.printables.com/model/427857-samsung-home-theater-ceiling-mount : this gave me the wall support part + the sliding insertion mechanism,…
P
Printables
Loud -speaker, Lautsprecher,
Ich habe mich hier einmal mit Fusion 360 und meinem neuen und ersten 3D Drucker näher befasst. 180 mm hoch und 86 breit. Nahezu Originalmasse des alten Visaton Nano. Löcher für 40er Lautsprecher. (Hate ich noch über. Kein Klangwunder,…
P
Printables
Volvo 850 speaker adapter
Volvo 850 speaker adapter to convert to 13cm (5inch) speaker. If needed drill new holes to position your speaker. Print out of PETG or ASA or ABS or better. Use at least 20% infill and 4 walls.
P
Printables
Speaker Interface for 1/4"-20 threaded mount holes
Speaker Interface for 1/4"-20 threaded mount holes, such as found on the Polk Audio RM6761 satellite speakers. Note that in my case, the speakers were quite heavy for the original articulating mount design and are weighed down so they…
P
Printables
Minimalist Speaker Stand for Desk Setups
This 3D-printed speaker stand is designed to fit 14x14 cm speakers and features a 1 cm stopper to keep them from sliding around. It’s compact, looks great on any desk, and gets the job done. The design is 14x15 cm but can be easily scaled…
P
Printables
Seat Ibiza 6J Speaker Adapter for longer speakers
Its an Adapter to put a 165mm (or in my case a D-165i from Reckhorn, which is 175mm) speaker into the doors of an 3 door Seat Ibiza 6J Sportcoupe. You need to get this adapter if you want to put longer speakers into your frontdoors…
P
Printables
Tesco Green Box Topeak Quick Track Adatper
Do you have a tesco crate box hanging around that is not finding any use? Do you ALSO have a bike with a topeak pannier rack on? Well do I have news for you my friend, with this nifty device you can turn your old green box into your BRAND…
P
Printables
Speaker Grill for the DIY Speaker from DIY Perks
Just print it flat and use supports. I made 100% infill, but that is up to you. Afterwards, I sprayed it the same colour as the speaker itself and done. Looks better in my eyes and keeps the 3D model look. Use normal 5x8mm (N52 or N35 - I…
P
Printables
Jabra Speak2 75 mount/lock
We're using these speakers in our meeting rooms in our office and to prevent theft, we decided to mount them to the table using double sided tape. This mount attaches to the cable loop and locks with a single M3x10-16 screw, so it cannot…
P
Printables
Bose Soundlink Flex Bluetooth Speaker Wall Mount
Bose Soundlink Flex SE Bluetooth Speaker Wall Mount
P
Printables
Sonos Roam Speaker Magnetic Holder
Attach a Sonos Roam speaker to a wall (or golf cart) with a powerful bar magnet. Recommended Material I recommend printing with a heat-resistant material, like PETG , if you intend to store it in warm places, like a car on a sunny day.…
P
Printables
VW Tiguan instrument cluster speaker mount
I had the instrument cluster speaker go out on my 2018 Tiguan. The speaker is what makes the blinkers click sounds and seatbelt dings and whatnot. In addition to not being able to hear alerts and the blinkers, the car will also disable…
P
Printables
Jabra SPEAK2 55 desk stand
sung, minimalist stand for the Jabra Speak 55 LIKE if you like. thanks!
P
Printables
Sonos Roam Speaker Bike Mount Remix
For music lovers on the go - a perfect fit for the Sonos Roam portable speaker - this custom mount lets you attach your speaker to the “bottle cage” of your bicycle. This is a remix of the great design Sonos Roam Bicycle “Bottle Cage”…
P
Printables
Apache 2800 single polk 6x9 speaker grill and trim
Designed for the Apache 2800 case, for one Polk DB692 DB+ Series 6" x 9" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x8mm screws.…
P
Printables
Multiboard Holder for Holdpeak 886A Radiation Detector Geiger Counter
Multiboard Holder for Holdpeak 886A Radiation Detector Geiger Counter
P
Printables
Audio Cabinet Speaker Inner Port Tube
Cabinet speaker port tube Inner size tube 55x154mm Mounting from inside cabinet
P
Printables
5.25" Ceiling Speaker Mounts for 1992 Toyota Coaster
We have a 1992 Toyota Coaster (HZB31) which has very low profile speakers mounted on the ceiling. These brackets are slightly bigger to accommodate a 5.25" speaker (in this case a Polk DB522). Requires some M3 threaded inserts and M3x6 or…
P
Printables
8in (200mm) speaker grill
Printable speaker grill for audio projects. Designed to fit Pride Diamond 8 V2, but they should fit many other speakers (tested also with Rockville RXM 84). I've printed mine with ABS so they won't deform under higher temperatures.
P
Printables
40mm speaker enclosure
I've remixed a nicely designed ported speaker enclosure to fit my 1.5 inch speaker with bigger magnet. I've also made a version with pins for toolless assembly.
P
Printables
Yarbo Datacenter - Roof peak soffit /Gable End mount
OEM mount is a long and gangly pole , too wobbly for me! Too many posts of folks adding guy wires to keep the wobble down. Any wobble at all will offset your yarbo core by the same amount; its supposed to be static! This mount is intended…
P
Printables
Gridfinity Bin - PeakTech 2025 Multimeter
This is a stackable Gridfinity bin for the Peaktech 2025 multimeter. In the lower section there is enough storage space for all the accessories included with the multimeter. The bin fits the standard 42 mm grid and has a size of 5x3x10.…
P
Printables
EPOS Speaker Base
Wanted a base to put my EPOS speaker into and hold it at a 45 deg angle. Model is EPOS A00306. Printed with lightning infill at 25% and tree supports for the cord hole in the back and fuzzy skin. V11 has a loose fit (4.5" dia). V12 has a…
P
Printables
6.5" 0r 6.75" Speaker Enclosure/ Can Roll Bar or Wake Tower
Wanted to design my own speaker enclosures for my boat so this is what i came up with. They will fit most 6 1/2 and 6 3/4 speaker. The inter hole size 5.5" and outer size is 6.8" the total height of the can is 7.45" The mount is a…
P
Printables
Sony SRS XB33 Speaker Holder
This is my Sony Speaker Holder to mount it to my bicycle. So i can hear music when riding in the forrest or around the lake. I publish here also the Freecad files, so you can adapt it to your bike frame. Enjoy your music while cycling.…
P
Printables
Marshall Emberton Bluetooth Speaker Stand/Riser
A simple stand/riser for Marshall Emberton bluetooth speakers. If you're using the Emberton as a computer speaker like I am, and happen to have it up on a monitor riser, this should work well.
P
Printables
Speaker Ring Adapter for VW GOLF MK4 / VW BORA / VW Jetta 6in Speakers
Ring adapter for 4 door speakers. Door bots with 5mm@10mm. (158mm standard door fixed bolts) Speakers fixed with drywall 5/8 (143mm diameter) Standard fix for 6in speakers.(not 6.25 or 6.5mm) ... Adaptador para VW GOLF, Jetta, Bora para…
P
Printables
Jeep Wrangler TJ (97-02) Front Upper Speaker Pods - 6.5"
I bought some nice speakers for my wife's 2002 Jeep and after stuffing them in the dashboard with a variant of the brackets around I decided that it didn't sound as good as it could. I couldn't find anything like this (maybe that is for a…
P
Printables
UK Light switch cover cover faceplate with speaker button
A silly cover for a UK Lightswitch that allows you to fit an 88mm dog training type speaker button (like these https://amzn.to/44nmemS ) instead of a switch. Perfect for use with hue/smart bulbs as the button can be removed for access to…
P
Printables
Ultimate Ears BOOM 2 Magnetic Speaker Holder
Take your music anywhere with this rugged magnetic mount designed exclusively for the Ultimate Ears BOOM 2 portable speaker. Attach to any metal surface—golf cart rails, boat railings, bike frames, toolboxes, lawn mowers, and more!…
P
Printables
Ultimate Ears BOOM 4 Magnetic Speaker Holder
Take your music anywhere with this rugged magnetic mount designed exclusively for the Ultimate Ears BOOM 4 portable speaker. Attach to any metal surface—golf cart rails, boat railings, bike frames, toolboxes, lawn mowers, and more!…
P
Printables
GM/Opel Vectra B - Rear Door - Adapter for loudspeakers
GM/Opel Vectra B - Rear Door - Adapter for loudspeakers
P
Printables
Puffco Peak Pro Desk Charging Dock
This is a Puffco Peak Pro desk mount that has room for a wireless charger sure many will fit but diameter is set for 87.5 mm. The wireless charge i used is a onn WIABLK00008472. No Clue if its made anymore but should be simple enough to…
P
Printables
Speaker/subwoofer input connector 70x60
Разъем для подключения колонок или сабвуфера Данную модель вы можете приобрести тут: https://cults3d.com/ru/3d-model/gadzhet/speaker-subwoofer-input-connector-70x60 Рекомендованный размер саморезов: 20x3 - 4 шт. Рекомендованный размер…
P
Printables
Beats Pill Magnetic Speaker Holder
Take your music anywhere with this rugged magnetic mount designed exclusively for the Beats Pill portable speaker. Attach to any metal surface—golf cart rails, boat railings, bike frames, toolboxes, lawn mowers, and more! Recommended…
P
Printables
Ultimate Ears MEGABOOM Magnetic Speaker Mount Holder
This magnetic mount securely attaches your UE MEGABOOM 3 speaker to any metal surface. Ideal for workshops, garages, offices, and more. * Convenient: Easy to use—slide in your speaker and enjoy. * Secure Fit: Dual magnets ensure a firm…
P
Printables
MK3 Supra 6.5" sealed door speaker housing
Prints in place with only supports for the bolt tabs (at least on my MK4s printer) I have test fit this in my car and it fits great, can't test it with a speaker for a few more weeks/months due to the car being restored Drivers door…
P
Printables
MK3 Supra 6.5" speaker boxes for the door (not sealed)
I have not tested these with speakers as my car is currently stripped for restoration, but test fits show these to fit perfectly Category: Automotive
P
Printables
Nautilus Speaker - Tang Band W3-1878
The enclosure has a volume of approx. 3.15 liters. The port was tuned to 89 Hz with a slight dip in response above that according to WinISD. The dip can be corrected with an equalizer at 175 Hz +1.5 dB (Q=1.0). With these settings, the…
P
Printables
Creative speaker hanger
hook for crealitive repro systems. Use double sided tape to mount it.
P
Printables
Technics SA-EH790/SB-DV290 Custom speaker grilles
Technics SA-EH790/SB-DV290 Custom speaker grilles
P
Printables
iPhone 16 Pro Passive Speaker Amplifier
The iPhone 16 Pro (and I'd predict more than a few others) has audio coming out from the top and bottom of the phone. Most of the “speaker” models I've seen only utilize the bottom speakers for audio. This model allows for “near” stereo…
P
Printables
EZGO TXT speaker pod
6.5" Speaker pods that mount under the dash of a TXT, used Jack nuts to secure them Prints with no supports
P
Printables
Wrangler JK sound bar speaker adapter.
Jeep JK Speaker adapter for speakers with larger magnets 3/28/26 Added .step File
P
Printables
Klipsch Speaker Mount
This is my personal design for the Klipsch R-41M speaker. After an exhausting search of the web and not finding anything to my liking I decided to make it myself. I wanted something that would be strong, hide the wires and minimalist in…
P
Printables
Skadis Peak Design mount
Printed at .2 layer height in PETG with a .6 nozzle, 3 walls and 20% gyroid infill. Use at your own risk, the rule of thumb is: If it doesn't fit with the lens on (the skadis gets in the way) don't put it there. Do not use with lens…
P
Printables
Speaker Wall mount
easy to use wall mount for bookshelf speakers. Ideal for home theater setups or ambient music systems the speakers just hang from the brackets and a 12" tall speaker will sit at about a 15° angle Category: Electronics
P
Printables
Hifi Speaker Feets (compatible Geneva speaker)
A small model for my Geneve XL. Designed for the original countersink screws that came with the stand. I wanted to replace the stand with small feet to have the projector a bit lower. I used the 30 mm version with the original power cord.…
P
Printables
LG SPT8-SPK speaker stand / riser
🧱 Speaker Stand / Riser – Print & Assembly Instructions Model: LG SPT8-SPK / LG S65TR soundbar Printer: Creality K1 Purpose: Raise speaker above obstructions (sofa, furniture, etc.) to align sound at ear level. ⸻ 🔧 Materials &…
P
Printables
Desktop Speaker Stand
These raise your speakers up 14cm, which is the perfect height for my desk. Inclulded are STL and Step files for all your remixing needs. You need one top, one bottom, one middle, one vertical connector, two short connectors, and 2 large…
P
Printables
Dual Ported Enclosure Speaker (Dayton PS95-8)
I wanted to build my sister a simple, aesthetically pleasing, and great sounding pair of speakers for her living room. I found this ported enclosure for the Dayton PS95-8 full-range drivers by @ProjectsByBrian, and loved the design.…
P
Printables
Alien peaking 2D art
Hey there! I just made this 3D file from a picture. I used eSun black PLA, eSun white PLA, Conjure chameleon PLA and Creality Green Hyper PLA for this print. I used a PNG that I converted to SVG. Then simplified the model with Fusion360…
P
Printables
Cobreflex speaker seal
I recovered two old University cobreflex speakers, but the seals were missing. So I scanned the speakers and redesigned the seals from there. The idea was to either have a dxf file for cutting them from sealing material, or print them in…
P
Printables
SnowPeak cp400 mp512 rear sight
cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.
P
Printables
Speakeasy Player Board Support Clips
Vital Lacerda's board game Speakeasy comes with thin cardboard strips meant to prop up the player board. Two problems with these: (1) they don't prop up the player board enough to slide cards into the top slots; and (2) they're not…
P
Printables
Anker Sound core Speaker case, handle, hanger
inspired by the soundboom's handle, can be clipped or hung
P
Printables
Speakeasy Insert / Organizer
This is an insert / organizer for Speakeasy with the Upgrade Pack that came with the Kickstarter version. It also holds either the wooden money or the cardboard money. It supports vertical storage, premium sleeves (Dragon Shield American…
P
Printables
Peak Shroud: Weight-Optimized 2.1/2.0 Lynx Shroud
As seen at CFT, BPOC, Rag and NSNW in 2025, my take on a minimalistic Lynx shroud. Compatible with the excellent Remnant pump geometry by Chance, this shroud is designed to be as light as possible while still providing the necessary…
P
Printables
Speakeasy insert (to use with existing insert)
The focus of my design was to use the existing insert and improve it for better functionality and comfort with the lowest possible filament consumption. Now all components which are used during the game can be placed with there trays on…
P
Printables
Christmas trea peak luchtalarm
I hereby present my latest design, a christmas tree peak in the style of a air raid siren. This model has not yet been produced, because that is a challenge in of itself, because of the steep overhangs. Recommended in PLA+ or PLA high…
P
Printables
Hyundai Ioniq 6 Rear Door Speaker Mounting Bracket
This bracket will allow you to replace the stock speakers in the rear doors of your Ioniq 6 without drilling holes. I designed it to be used with Kicker 51KSC6504 speakers and the screws they come with, but I have added the Fusion360…
P
Printables
Wall outlet plate for speaker (or other small low-voltage) connection
This model is quite specific to a requirement I had while fitting out a new room with a surround sound system. Maybe it's useful to someone else too though. This is a wall mount plate designed to take an RCA-style ("phono") connector so…
P
Printables
Mercedes Benz Vito W639 Speaker adapter 165mm
Speaker adapter 165mm (6.5) inner diameter 144.5mm height 25mm
P
Printables
Подставка-неваляшка для колонки Алиса | Tumbler stand for the Alice speaker
Описание модели: 3D-модель стилизованной подставки-неваляшки для умной колонки Дизайн вдохновлен классической игрушкой-н
P
Printables
Toyota JZX90 rear door speaker basket to accept a 5 1/4" speaker
Models to produce a bolt-in solution to factory JZX rear door speakers. Use factory wire harness and retail speakers without drilling holes or cutting panels. These models work on both the left and right sides of the car, just rotate 180…
P
Printables
Teufel MYND ; Portable Speaker for Makers !
Hey Makers! Happy to share with you an exciting "Printables" here :) I found that the German audio powerhouse Teufel has stepped into our world with MYND —a next-generation soundbox project designed specifically with the maker spirit at…
P
Printables
Hydrapeak water bottle handle
the handle on my water bottle broke so I designed and printed this replacement print with 0.20 mm layer height and 15% infill
P
Printables
Volvo XC90 Rear speaker set
Rear speaker installation set for 1" tweeter and 6,5" woofer for volvo rear door. On the pictures are 1st gen of the model, but on thje second gen of the desing is the cable attachment holes and less material consumption. Woofer…
P
Printables
Jaguar XJS base rear speaker adaptor
So this is for the Base (convertable in my case) rear speakers. The original mid range speakers were an odd specimen no longer availalbe. So what I did is I found a mid range speaker (Dayton Audio RS150-4), 6 inch and moved it forward…
P
Printables
C-Note Speaker Cabinet and Brace (Cut to fit on smaller printers)
I love the C-Note speakers that I built but wood working really isnt for me. So I drew up the standard cabinet and cut it up to fit on normal sized printers like the MK3(S)/Mk4(S). They are quite hefty and my build came out to a little…
P
Printables
Speaker Feet
This foot decouples the speaker from its base. It shall be printed from PLA and TPU. PLA and TPU parts shall be glued together. The foot might be glued to the speaker. Alternatively, the foot shall be screwed by M3 bolts with M3 washer to…
P
Printables
Stand for Loop Portable Speaker
The Loop speaker is a pretty nice design, but it's quite thin and a little top-heavy and risks falling over, which might damage the screen. This is a simple stand with feet to keep it stable. The Loop fits in snugly and the stand will…
P
Printables
Adapter Speaker Helmet Sohei J-Cruise 3
voici un adaptateur pour installer les écouteurs d'intercom de marque LEXIN B4FM , ce model est un peu serré au niveau du casque il faut un outil plat pour insérer les 4 picots , je laisse le fichier STEP pour celui qui veut adapter…
P
Printables
Lone Peak V1 Camper Awning Wind Fairing
I designed a wind fairing specifically for the side T-track profile for the Lone Peak V1 Truck Camper. Designed to cover about a 150mm X 150mm packed profile of a side mount 270 awning (specifically the OVS HD 270 LTE Awning). Best…
P
Printables
Subaru 6.5" Speaker Bracket
Subaru Impreza speaker brackets for front door. I used M3 heat set inserts. Known to work on: - 2013 Subaru Impreza Belived to work on: - 2004 Subaru Forester Doesn't Work on - Impreza GX 2004
P
Printables
VW T4 speaker upgrade 6.5 inch and tweeters transport/caravelle/multivan
Updated my speakers on my van and needed to make som adopters. one 6.5 and tweeter upgrade booth are made to be basic to print so not super much details, but worked fine. The 6.5 door speaker neede just a bit more distance from the…
P
Printables
Loudspeaker enclosure for Markaudio Pluvia 7.2 HD
The Markaudio Pluvia 7.2 HD is arguably one of the best 4" full range speakers out there where you can get away without a crossover or notch filter. See one of the reviews . There are multiple suggestions for enclosures on the Markaudio…
P
Printables
Bothell Sphere Mini speaker
It requires a 330 uF cap inside as a high pass filter, to protect the small driver from lowest bass, so its effect applied at both graphs. Port tuning is around 74 Hz. EQ is next: High shelf 800 Hz, -2.5 dB, 1.9 octaves. Peaking at 7700…
P
Printables
Lego Minecraft 21243 The Frozen Peaks Display Stand
Since it doesnt have to be that strong i personally used PLA with %10 lightning infill to reduce material there is a few studs on top that you can mount the set on. Enjoy :D NOTE: This is the first ever model i published online,i tried my…
P
Printables
Speaker mounting bracket for Kenwood TM231/331/431/531 transceivers
The TMx31 series amateur radio transceivers use a plastic bracket mounted above the PC board to hold the speaker in position against the grille in the top panel. These transceivers are getting a bit long in the tooth, and there are a…
P
Printables
Peaky Blinders - Hueforge
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm The Model is 200x199.8mm in size You may print at higher layer heights below the Base Thickness of 2mm The Max allowed Thickness is 3.8mm and the Actual…
P
Printables
Back speaker enclosure for 4th gen toyota celica
This enclosure goes between the rear seats right behind the armrest. You will need to remove the ashtray and its mounting chassis, buy some wires to connect the speakers to the autoradio through the center console (approximatively 3m of…
P
Printables
Love Chair Speaker Box
use JBL Link Portable 2.25 inch 20w passive radiator JBL charge 3 70mm
P
Printables
Peak Design plate v3 Honeycomb Storage Wall (Lens Holder)
I printed the Peak Design part out of ABS, 4 walls, 15% gyroid infill, 0.2 mm layer height. MK4S w/ HF 0.4mm nozzle. You need to use PrusaSlicer's paint-on support tool to support the actuating arm part, as below. I recommend using…