Counting matching models…
Modular Pedalboard This model allows you to print your own modular pedalboard. It is modular because you can add extra lengths of pedal board in the sideward direction, adding 20cm (or 22cm) each time. The Pedalboard in the picture is…
# Print Settings Printer Brand/model : Creality Ender 3 V2 Neo Rafts : No Supports : No Resolution : 0.26+ Infill : 15%+ Filament: Any PETG/PLA Notes : Quite an easy print and easy on the eyes too, but that comes with some caveats :…
ModBoard is a parametric guitar pedalboard designed utilizing 20-Series Aluminum Extrusions to provide full modularity and customizability. Includes STEP files for options for Velcro Mounting as well as Compression Mounting (Definitely…
This is my first design to share. It's an effects pedalboard designed to allow for expansion so that it's just the right size for all your pedals. I'm currently using 2 A sections on my desk as a mini pedalboard. The cross pieces are the…
These are 3D printable equivalents of the mounting plates used with Temple Audio's pedalboard. Using some mounting tape, you attach one (or more) of these to a guitar pedal. The mounting plate alignment nubs and center screw go through…
ModBoard is a guitar pedalboard designed utilizing 20-Series Aluminum Extrusions to provide full modularity and customizability. ModBoard desktop takes that same design language and moves it onto your desk, with two layers for extra…
I wanted to slant my Nano+ pedalboard to make it easier to press the buttons on my guitar pedals. The rubber feet of the pedalboard fit into the recesses of the riser. Print two of these, one for each side. I added stick-on rubber bumpers…
I designed this pedalboard to use with my bass pedals. It's lightweight and very sturdy. I used 2 inch industrial Velcro to attach the pedals.
Hello! This is a 180x180mm single pedalboard which can be joined side-by-side to create a larger, modular pedalboard. I designed this simple yet elegant pedalboard to print myself a little something for my HX Stomp and looping pedal. To…
Das Pedalboard besteht aus zwei Grundbauteilen (Seite und Steg), die zusammengesteckt werden können (Minimalkonfiguration: 2 Seiten und 3 Stege). Es ist problemlos nach rechts und links erweiterbar für den Einsatz weiterer Effekte. Die…
Modboard Ultra, the ultimate pedal system for musicians who crave limitless creativity! With twice the mounting channels of the Modboard Lite, it offers unmatched customizability and precise positioning. Compatible with Modboard Ultra…
Hi! This is my wood pedalboard mounting bracket for a CIOKS DC7 if you plan to install it under like I did. Hope you enjoy!
small effects pedal board. Holds 2-3 pedals depending on size. Roughly 8” x 6” x 2”
Extendable guitar effects pedalboard. If size is wrong on the board scale is 226.1 G-code for Ender 3 Neo
Required hardware: 2 X 3030 aluminium profiles cut at the desired length 4 X M8 ISO 7380 (for the aluminium profiles) 2 X M6 ISO 7380 (for the handle) 2 X M6 3030 inserts (for the handle) The rubber feet are glued directly to the lateral…
This is a remix for the amazing Modular Pedalboard, by Erasing. In the US, it is hard to source cheap M6 threaded rods (ie, less than $5). Some credit goes to user @StuffIPrinted who posted a make, and mentioned that he used M6x35mm…
Dead simple plates for attaching to Dunlop Cry Baby, then stick velcro to them to put it on your pedal board. Don't take off four screws at once unless you want to open up the pedal. Two at a time remove the screws and put the plates on.…
Just a simple quick print to make a pedalboard out of a few wood pieces. I printed it in PLA and it seems to be more than sturdy enough. I chose to print 3, but depending on the length of your boards you could use more or less. It's made…
Newer versions of Playseat Challenge seem to have a wider tube protector which the pedalbox mounts on top of. It's now 30mm diameter instead of 20mm. The entire model was remade, taking inspirations from the one remixed. Each mounted…
Side parts to build a pedalboard with 2040 aluminium profiles. Pedals are hold with velcro strip. A small power supply can be placed from below. Printed with 0.8 nozzle with galaxy black prusament pla, 15% infill.
Inspired by MendicinoB's 'Line 6 - Helix Stand' on Thingiverse. I needed to get my Line 6 Helix off the ground to prevent my robot vacuum from bumping into it and trying to eat the cords. So it needed to be robust enough to take discount…
Attaches to the bottom of a Strymon mid-sized pedalboard (blueSky tested) using the factory screws. This version has two tabs on the side for M4 screws for attaching to a 2020 extrusion pedalboard I designed. Velco could also be attached…
Thanks to the original model creator for sharing this pedalboard design, I enjoyed building it and learned a ton in the process. I wanted to mount my power strip to the pedalboard and designed a set of power strip holders by leveraging…
Velcro never really held well for me – so I designed these screw-on mounts instead. The large version fits standard Boss pedals, while the smaller ones are suitable for things like the Polytune or the Harley Benton looper.
I printed this model (and the original) in PETG with 0.28 layer height, 3 walls, 15% gyroid infill.
My goal for this pedalboard design is to design a light-weight and easily transportable board. Pictures shown are for my bass guitar pedalboard, which uses 300mm plank width and can easily accommodate 8 “normal” 125B enclosure pedals. I…
Pedalboard pro kytarové efekty, rozšířitelný. Expandable pedalboard for guitar effects.
A fully DIY pedalboard made of laser cut acrylic top and bottom plates and printed brackets. The board is split into interlocking halves to make transport easy. Power cable passthroughs are integrated into the design (designed around 10mm…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Model with less plastic for faster printing. Nut to mount between the wooden slats if you've made this type of pedalboard. This way, you can move the pedals freely without having to drill holes in the pedal board. Remixed 1590A/B mounts…
This is an extremely sturdy riser for guitar pedals mounted to a pedal board. It is sized to 40mm which is the width of the rail on a Pedaltrain Metro pedalboard. I used the half-size version for my board. Blend file is included if you…
Cheap, Custom Pedalboards Sometimes labeled as 2" x 1" boards, these 1.5" (actual width) x 0.75" (actual thickness) boards are sold at many home improvement stores in packs of 4 in 48" length, but you can use any dimensional lumber that…
A little mounting plate for your RC5 Loop Station which allows adding some velcro without messing with the perinstalled rubber pad. Installation Remove screws Add plate Install screws Done
EDIT: I switched to Arduino Uno, code is the same as https://www.printables.com/model/330041-guitar-stompbox, and I am using this box to handsfree control Youtube and Songster for learning to play. I needed a guitar footswitch board.…
Printed with Prusa Mini+ Rafts : No Supports : No Resolution : 0.2 Infill : 15% Filament: PLA Plank profile : 9.5 x 2.7 cm
Attaches to the bottom of a Strymon large-sized pedalboard (e.g. Volante) using the factory screws. This version has two tabs on the side for M4 screws for attaching to a 2020 extrusion pedalboard I designed. Velco could also be attached…
Four kind of details to build a board for your effects. Ready for experiments! Models can be printed with no brim, no supports (at least with PLA). Try to twist screws in nuts once before build a board to smooth the roughness. Use two…
There are a few decent pedalboard designs on thingiverse -- but I wanted to be able to make my own custom sized board (so it'd easily fit in my desk drawer for storage) -- so I made this. There's the 'Tube' (which is 2" x 1") -- which you…
These pedalboard legs aren't pretty (I might modify them later) but very functional and sturdy. I designed them based on my needs and a piece of wood board I had laying around. I like mixing materials when designing and building stuff,…
I wanted my pedalboard to be symmetrical and have handles on both sides, so I made a mirrored version with a connector, allowing for modularity with handles on both sides.
I made this overengineered pedalboard for my cheap china pedals, But it does look clean :) The pedals can be found on aliexpress and temu and sound suprisingly good for the price.. I got this whole setup (pedals, cabels, powersupply and…
Každou součást tiskněte na plocho, bočnice kulatými otvory dolů. Každá plochá lišta je složena ze dvou částí a slepena (pokud použijete vteřinové lepidlo, tak pouze gelové). Tyto části tiskněte naplocho, žlábkem nahoru. Pro spojení byla…
FOR USE WITH THE MODULAR PEDAL BOARD! Linked below! Add dedicated 1/4" in/out connections to your board, if you have two sections or more you can add one for the front of your amp & another for your effects loop! This is great for putting…
Made a simple box to keep my guitar picks on my pedalboard. Roughly the size of a TC electronics mini-pedal. Designed to press fit 5x2mm magnets to keep the lid securely in place when transporting it.
for a gift I made a pedalboard for a rectangular profile 30x15mm, it can be any length. The 9 volt power supply is assembled according to the standard scheme for switching on the LM7809 microcircuit Category: Music
This is a short guitar effects pedalboard I made as an extension for my 80 cm pedalboard, her I can put my wah, my rotovibe and my talk box, I made a little extension on the top so I can put my Simplifier DLX.
The finished board is incredibly stiff and sturdy without feeling heavy. I used 25% infill but probably could have gotten by with 20% or less. I used 3 different pieces of 1.5" x .75" wood I found on the 'value wood' shelf at Menards. The…
Designed to replace broken pedals, for a ¾" shaft. I used extra screws I found lying around… I think they were something like a coarse #12 x ¾" wood screw. I used PLA, but I assume PETG would be better for durability and outdoor exposure.
A slight remix of the original model, editing the power station holder and the sides pieces.
This 2-part mount will attach your Voodoo Lab power supply to your Pedaltrain pedalboard. Use two zip ties to secure the mount (there are slight recesses for the zip ties to lay in). This may work with other power supplies, but I have…
This is a mount so my Harley Benton PowerPlant ISO-5 Pro is more “stable” below the Harley Benton SpaceShip 50C pedalboard. Printed in PLA on a Longer LK4 Pro
Basically, a model for those in N. America who are cursed with imperial units. You can now make Erasing's modular pedalboard with 1/4" thread rod, and buy the thread by the foot. The width of the pedalboard for 1 beam's length + both feet…
I was inspired by other pedalboard ends I saw but wanted something with a flat bottom so I could stick pads on the bottom to keep it fro sliding around. This is designed to use the 1/2” x 2-1/2” poplar boards you can by at Home Depot. The…
Made this to get my pedalboard off the floor. I'm unsure of the hooks maximum weight capacity. It is holding the pedalboard fine. The pedalboard is made out of birch wood, with all the electronics it's about 15lbs / 7kgs…
A remix of the power supply bracket holder for Modular Pedalboard, designed to hold the Vitoos DD8-SV2. I printed in PETG with an 0.6mm nozzle.
Clean up your setup with this perfectly-fitted Guitar Pedalboard Cable Routing Clip, Adhesive Mount, Clean Cable Runs Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
I printed this for a friend but the only hardware I had enough of was 8-32 heat inserts and screws. I edited the original step files but kept the hole placement the same as edulpin's version. I also thought it needed grippy feet and a…
I'm building a keyboard pedalboard, and designed some elements to fix a few pedals. It can be interesting for people for the two following : Yamaha FC-7 (pedal blocker for the back - the pedal can also be fixed in the front with a screw)…
Clean up your setup with this perfectly-fitted Guitar Pedalboard Cable Routing Clip, Adhesive Mount, Clean Cable Runs Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
Inspired by Modboard Desktop Stand, I made simplest pedalboard. No inserts, no nuts, all you need is 20-series extrusions with side threads and 4 screws M6 for assembly. Rubber pads and dual-lock strap is optional. I tried to make it…
Spacer / Holder for Behringer P1 Headphone Amp to a Temple Audio Solo-18 Pedalboard using the Temple Audio grid pattern. This way the Behringer P1 HP-Amp can be secured under the Solo-18 Pedalboard. Ideally for wired in-ear use. The…
frame support to build pedalboards using 10x10 piece of wood, you can use more than 2 to make the board stronger if it needed, the final piece is stronger than it looks, i use 20% material with pla+
The CME H4MIDI WC does not come with an easy way to mount it to a pedalboard other than to use velcro or tape. This mount slides over both ends of the MIDI hub and allows it to be anchored with 4 screws.
Clip to add zoom MS+ series pedal into a pedalboars. It helps to use zipties to hold the pedal into the pedalboard, as their desgin doesnt allwow to zip directly. pla+, 20%, no supports needed
Printed in PLA attached with 3,5x20mm Scews Bars: 16mm Plywood, 39 mm wide you need to add some Grip on the Bottom and Velcro on Top.
Pedalboard pro kytarové efekty, rozšířitelný. Expandable pedalboard for guitar effects.
I made this overengineered pedalboard for my cheap china pedals, But it does look clean :) The pedals can be found on aliexpress and temu and sound suprisingly good for the price.. I got this whole setup (pedals, cabels, powersupply and…
A slight remix of the original model, editing the power station holder and the sides pieces.
These pedalboard legs aren't pretty (I might modify them later) but very functional and sturdy. I designed them based on my needs and a piece of wood board I had laying around. I like mixing materials when designing and building stuff,…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
BOSS BCB-60 Pedalboard Slide Latch Locker spare part great fit, more resistant than the original! If you would like it to be printed and shipped to you try this link…
Medium-Size Guitar & Bass Pedalboard This is a medium-size modular pedalboard designed for guitar and bass effects pedals. Its modular structure allows you to add as many side modules as needed, making it easy to expand according to your…
Small-Size Guitar & Bass Pedalboard This is a small-size modular pedalboard designed for guitar and bass effects pedals. Its modular structure allows you to add as many side modules as needed, making it easy to expand according to your…
