109 models
Helps lock the pump onto the oil reservoir so that you can pump one handed without it lifting off.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Made to fit Xpelair VX100-SP Bathroom Fan . It will not work on any other model.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Prestar mucha atención a la calibración de la maquina y de ser necesario ajustar compensación horizontal (x y) Actualización!, agregue el archivo 3mf para imprimir directamente multicolor.
modelo de escarapela argentina Inicia con colore celeste luego continua con color blanco y amarillo acepto donaciones link.mercadopago.com.ar/printable
Poseidon swirled his ambrosia for a while, contemplating the vastness of his watery dominion; putting down his chalice on the coaster, he noticed how most fitting its pattern was for a new maze with elegant coral, rivaling those conceited…
Traigo 3 modelo de escarapelas y 2 personalizables, cualquier cosa esta la instrucción y sino contáctenme por cualquier cosa Inicia con colore celeste luego continua con color blanco y amarillo y si pueden donarme lo que sea, trato de…
I've bought IKEA UTESPELARE table and STUBBERGET monitor bracket. They looks really good together and works just fine, however I've noticed that table mesh was bending under the weight of monitor. This little support is almost invisible…
The usb cable holder for the IKEA UTESPELARE gaming table, which you simply insert into the gap between the wooden and metal part of the table. I recommend measuring the gap between these parts and adjusting the width of the model in the…
Escarapela diseñada originalmente para las fiestas patrias argentinas. También incluí archivos STL preparados para imprimirse en tres colores, como por ejemplo tiene la escarapela italiana. Además, subí los archivos originales en formato…
DESCRIPCIÓN DEL MODELO 3D Diseño personalizado para imprimir con el nombre del cliente. Las Fiestas Patrias peruanas son las celebraciones por la Independencia del Perú del dominio español. Oficialmente constan de dos días. El 28 de julio…
LÅNESPELARE is pretty nice if you take it apart und do you're own thing. The LÅNESPELARE ring light is a really good light for the workbench, but the foot is really awful big and heavy, so I put it on the pegboard from Ikea and now it…
Bandera Argentina, se puede utilizar como escarapela o imán. Impreso en PLA marca 3n3 Altura de capa 0.3 Nozzel :0.4 Temp Nozzel: 205 Cama: 60 Tiempo 40min Cambios de filamento capa 26 y 30 Soportes :no Balsa: no Impresora: Artillery…
3-in1 System for IKEA Utespelare gaming table. Interchangable add-ons - Shelf, Headphone hook and Trash Bin. Just place the Holder on any of the legs and simply tighten the screw. Works both inwards and outwards. Shelf was designed to…
1:1 detailed skull of a pelagornis This model was made for 350mm^3 print beds due to its size. The .STL files are massive, they may take a while to load and slice. The scale model should fit on most 3D printers though. Recommended Print…
Hook to put on the side of an ikea utespelare desk to hang bags and backpaks. I suggest to print it sideways (like in the stl) to improve hook strength. .2mm layer height P.S if you want you can extend the holder to support headphones.
I took the beautiful pelagic maze costers from voidbubble and created a multi-color model from it! You don't necessarily need a multi-color printer to make them. There are instructions on the Internet on how to make a multi-color print…
1:10 Scale model of a pelagornis. The model features detailed feather texturing along the model. I recommend printing it at a lower layer height or with a resin printer.
Recording Artists - The Police - Stewart Copeland, Sting, and Andy Summers - 1980 3D printable model.
Basicamente puse el clip insignia en PrusaSlicer, agregue el modelo como archivo de la escarapela y ajuste el tamaño, pinte colores y mande a imprimir. Puse como purga en el objeto que va debajo de la remera para ahorrar tiempo y purga…
A cable holder to fix the cable in the IKEA UTESPELARE table in the metal net of the table. Width can be adjusted pretty easily in any 3d editor.
Hello everyone, I create a Cable holder/ manager for the Ikea Table UTESPELARE its Create to Manage all your cables behind your Table leg and no one see them from the front.
Its an under table mount for 2x2 audio Interface specifically used for IKEA UTESPELARE table, It can be also used on all generic tables as well.
Data source: eu_dem_v11_E40N10 Copernicus Used qGIS and DEMto3D plugin vertical exegeration at x10
Mount for G1200 microsocope so you can mount it on LÅNESPELARE microphone mount. It uses two M4 heatset inserts for secruing microscope. I made it out of PC CF
One of the few personal designs that care to model. I used to do digital painting but haven't finished anything since 2016 so this has been sitting in my sketchbook for a while. This was inspired by hearing that Black Dragonfish are one…
Inicia con colore celeste luego continua con color blanco y amarillo acepto donaciones link.mercadopago.com.ar/printable Paypal [email protected]
Yes I like big stompy creatures. Made a Pelakka Wurm as it was quick to make so I can keep uploads consistent while making a far more complicated mini. If you want to help me keep making free models or to tell me what I should make next…
The 14th / fourteenth Colossus - Pelagia NOTE: I did not create this model. It is from Shadow of the Colossus. (PS2)
this is a 19" 1u mount for the peladn/TRIGKEY wi-6 mini pc for your rack , you'll need 2-4 m2 screws anywhere from 6-40mm long will do the job you can also print something else from the collection and it will fit in the rack , they screw…
Locking your bike every day can get tedious, especially when you’re commuting and constantly locking in and out. There are plenty of mounting options out there, but I couldn’t find one that let me lock and unlock my bike in a blink. So I…
For the Ikea LÅNESPELARE I have designed an adapter with which it is possible to use normal sized cups in it without them tipping through the handle. There is a simple and a "stable" version available. So far I haven't had any problems…
In honour of the 30th Anniversary of ReBoot this year, I have made Copeland, Turbo's Keytool. The gear is held on with two 10x1 magnets, spins freely and is removeable. Each part was printed support free in the appropriate colours. The…
Ersatzdoppelabdeckrahmen für Somfy Rollladenschalter oder Wandsender / Smoove Pure Alternativ zum Basteln einer Automatisierung der Steuerung… _______ Replacement double cover frame for Somfy roller shutter switch or wall transmitter /…
My Ikea desk (MALM) doesn't actually work with the new Ikea LÅNESPELARE cup holder that uses the clamp design. This adapter allows you to mount the cup holder using a screw and uses the placement peg holes on the holder. Just unscrew the…
This is a simple hook for your backpack or anything else to be mounted directly on the Ikea UTESPELARE frame… … or any other, of the same frame size, ~40 mm wide with the screw hole centered. The model has an in-built notch for the hook…
Identical to the included clips. The kit comes with six, I found I needed about three more to cleanly route the cable so I made this. Print notes: Used PLA, no infill just perimeters, came out strong and springy. Needed to use two raft…
My IKEA UTESPELARE gaming desk had very serious sag in the rear due to 2 heavy monitors mounted on a central monitor stand. I designed and printed this support pillar that sits on the metal cross member that also holds the cable…
This is an alternative clip for the ikea LANESPELARE microphone arm. The provided clips are for very small cables and didn't fir my 6mm diameter shielded mic cable.
Pelagic Autopilot only sells a fabric cover as optional for their control head unit. There are no CAD models available for the public that has a plastic cover for the Pelagic Autopilot control head unit. With this model you'll be able to…
Made for Bergamont Grandurance bicycle with Pelago Commuter Rear Rack Fits 35mm seat tube (mine is 35.15 mm). Adds mounting point for rear rack bars to your seat tube. Use M6 screw with nut and washers. Also check out my other designs for…
Simple hook that i used for my headphones cable cause my PC is on the right side of my desk and my nobrain head bought headphones with its cable on the left side. Open for you to take and remake, STEP files avaible. Comment on the model…
I highly recommend printing this as the model is oriented, on it’s side, for maximal strength. Use a brim if you’re having problems with adhesion. -If you print it with PETG and with the largest area flat to the bed you will get a…
Enhanced version of the Kryptonite lock mount which adds a slot for 20mm velcro to secure the lock on bumpy roads. You need two M3 screws and nuts to keep the mount in place. It should fit any rack / rails with 10-12mm diameter, with some…
Update April 2026: I've updated the printable cup holder (use if you do not have the part from the wooden ikea lanespelar one). Now includes cutout for a mug handle, which also makes it easier to screw into the hook bracket.…
Peine para maquina de pelar Wahl a 3.5 cm.
I found that the “LÅNESPELARE” cup holder from Ikea wasn't really suited for coffee mugs, so I decided to make a very simple cylinder so that the bottom of the holder would sit a lot higher. This way, you're able to place a regular size…
Made for Bergamont Grandurance bicycle with Pelago Commuter Front Rack (I also have the optional lowrider pannier support) Stock bracket don't fit well. This makes it fit good as low and tight as possible. Since it flexes a little the…
Need something larger for my Thermal. Print without support.
A replacement cupholder for the IKEA Lånespelare Cupholder mounting bracket. I originally sized it for the LTT 64oz water bottle, but 125mm was a bit too perfect in diameter, so it caused suction when removing the bottle. Resized slightly…
Escarapela de Argentina para celebrar los 3 mundiales ganados. (Ojalá no sea mufa) Cargué 2 archivos: Un stl y un 3mf con el formato original.
A six sided die to keep track of a heritor's Blood Burn modifier in Frostgrave - Ghost Archipelago. It shows the numbers 0, 3, 6, 9, 12 and 15. The 6 and 9 are underlinded to make them easier to distinguish. I also wrote the numbers in a…
Just a simple shelf adapter for the IKEA Lanespelare desk mounted cup holder. Flip it over and it supports a large handle mug. Other way, protects the bottom from impact and allows for taller short handle mugs
Kid wanted this light to be mounted to the wall, so here it is :)
A simple model converting the Ikea mug holder into a pen holder. Two other models: Divided into three sections on top: link Divided into three sections all the way through link
I'm not the most organized person so my Utespelare desk tends to get cluttered. So I can't have my coffe mug on the desk, I might spill coffee on my clutter - and more importantly, that's desk space that could be holding more clutter! I…
IKEA uses 10mm wheel pins for the budged Huvudspelare chair, on wheels that give up after about two months. Made a replacement insert which lets the chair use 11mm pin wheels. Tested up to 130kg, no long term wear & tear experience so…
Wenn man einen bodenlosen Siebträger hat und nur selten mal einen doppelten Auslauf benötigt. Gemacht für die Decent DE1. Ob der Adapter auch an anderen bodenlosen Siebträgern hält weiß ich nicht. Gedruckt mit von der FDA zugelassenem…
Made for Bergamont Grandurance bicycle with Pelago Commuter Front Rack optional accessorie Lowrider pannier support Stabilizes your front rack. Uses standard M5 bottle cage screw and zip tie. Also check out my other designs for this rack,…
Made for Bergamont Grandurance bicycle with Pelago Commuter Front Rack (I also have the optional lowrider pannier support) These dropouts go upwards and attaches on the lowest “bottle cage” hole on fork instead of the mudguard hole which…
Printed in TPU for a good seal.
This is an adapter that I made for the PELA Random Orbital Sander (511068 ROS090), though it probably fits others too. It's meant to be used with the included larger adapter that fits on a standard vacuum hose, with this printed adapter…
hello, Here is my cable organization solution, it's for the ikea gaming table:UTESPELARE and extension cord:…
A small upgrade for IKEA Lånespelare, Magsafe phone holder. Magnet ring from Aliexpress. Links: LÅNESPELARE Ringbelysning med telefonhållare - IKEA Strong Magnetic Sticker for iPhone 13 12 Pro Max Magnetic Ring Phone Holder Stand for…
Converts the mug holder into off-desk pen holder with three separate compartments. The dividers keep things a bit neater inside than the plain model with just three dividers. Requires no supports and prints flat. Other variants: no…
I created this case to vertically radmount a mini pc in the back of a rackcase holding my behringer XAir-18 Mixer. I printed this with PLA using 100% infill for durability on an Ender 3 V2.
From the original model: This is a very simple adapter which allows to replace the original very cumbersome phone holder from the Ikea LÅNESPELARE with a MagSafe Puck. The puck fits very tight and is hard to remove after putting the puck…
Headphones support for Ikea's desk Utespelare, designed to wrap around the support frame and clamp on the desk surface itself. Made in Plasticity
Don Pelayo – Buste 🇫🇷 Français Découvrez ce buste de Don Pelayo , figure légendaire de l'histoire espagnole et premier souverain du royaume des Asturies. Considéré comme le héros de la bataille de Covadonga au début du VIIIᵉ siècle, il…
@Malte 's underdesk mount for the Audient Evo 4 is a slick design, and exactly what I was looking for….. …well, almost exactly. I have the IKEA Utespelare desk, which has a metal structural bar underneath, near the edge - so I took…
Made for Bergamont Grandurance bicycle with Pelago Commuter Rear Rack Stock design fits very bad on a “normal” bike. Brackets are too tight. This makes them wider so you can fit without problem. Also check out my other designs for this…
A simple model that makes a pen holder out of the ikea off-desk mug holder. See also a variant with dividers: link And just a simple ring: link
Pelapapas con empuñadura tipo táctico, ideal para acampar. Recomiendo PETG para impresión pero con PLA también es muy funcional. Usa cuchillas genéricas así que puedes desarmar el de tu casa y darle un ungrape.
I suggest printing with these settings: 100% rectilinear infill 0.10mm layer height I personally printed the clips in PETG
Pause the print at layer 17 or 18 (when printing at 0.2mm layer height) to drop in 2 x 12x2mm magnets before resuming printing of the print-in-place model - see images. Alternatively, print the model with the side slot, to glue magnet in…
Replacement support for the IKEA LÅNESPELARE microphone arm. Stronger than the original while maintaining the same dimensions.
Printed with PLA and no support necessary.
I've remade this design, transforming a simple donut into a perfect insert for the IKEA ÅNESPELARE mug holder. The ÅNESPELARE mug holder is super handy for tall mugs or those without handles. However, if your mug's handle is too low, it…
The top metal and wooden surfaces of my UTESPELARE became unaligned by a few mm. I do not use the under-desk wire holder, so I made a bracket that can be placed into the hook-holes for the holder. This lowered the metal portion of the…
Spacer to distance and lock the ikea stand so that it can't fall into the gap between the desk and the wall
This model lets you convert an Audio-Technica AT2020 microphone to mount directly onto an Ikea Lanespelare lamp arm, turning it into a budget-friendly and functional microphone boom arm. The design consists of two printed parts: Ikea…
Solution to have extended USB connection ports in the center of my IKEA Utespelare Desk
Pelagia Shandow Of The Colossos
3D‑printed aircraft model features a streamlined aerodynamic fuselage, lightweight internal ribbing, and precision‑engineered surfaces that enhance stability and airflow. The modular design allows each major component—wings, tail…
Wanted something to hold my mini PC on its side to stand it vertically other than just sitting it on its side. So I designed this. It may work with other mini PC's with a 52mm thickness.
Stand for ApeLan Lightcan to charge during use
IKEA uses 10mm wheel pins for the budged Huvudspelare chair, on wheels that give up after about two months. Made a replacement insert which lets the chair use 11mm pin wheels. Tested up to 130kg, no long term wear & tear experience so…
I suggest printing with these settings: 100% rectilinear infill 0.10mm layer height I personally printed the clips in PETG
Replacement support for the IKEA LÅNESPELARE microphone arm. Stronger than the original while maintaining the same dimensions.
Screw on your new cupholder too short? Desk feeling a bit thin? Look no further! This model is to act as a spacer for the screw on the IKEA LÅNESPELARE. This model is intended to be VERY tightly toleranced to act as nearly a press fit for…
My daughter wanted a holder for her bedside table for her IKEA PELARBOJ lamp. We started a problem analysis, looked for solutions and discussed them. Finally, we discussed the design. Then we sat together at the computer and designed the…
This Mug Adapter was designed specifically for the IKEA LÅNESPELARE Cup Holder. People familiar with the product know the frustration of not being able to use this "cup" holder with their a typical "mug" with handle. My issue is that I…
Have a Trust GXT 232 Mantis and want to use it with an inexpensive microphone desk arm? This is a simple adapter that allows you to mount your Trust GXT 232 Mantis microphone onto the popular LANESPELARE microphone arm from IKEA (with…
This is a snug fit bottom protection for the Ikea LÅNESPELARE Cup holder. You can shrink it down .2mm and would allow you to remove it but this is made to not be removed. I used PETG CF from Inland.
Printed with GEEETECH wood PLA. No supports, rafts. Mouse ears recommended.
Allows for the IKEA LÅNESPELARE Cup holder to accommodate a standard coffee mug without having the mug unsupported and pressure resting on the cup' handle. Through holes are for easy removal, and edges are rounded off to prevent suction.
This is mount/adapter for fume extractor which you can use to attach it to mic stand. I have it attached to Ikea Lånespelare. You will need 1/4 heat insert (mine was 12mm of height). No supports needed.
Pla friendly model. Recommended to print with 0.12-0.16 mm layer, supports on (tree supports ideal). Best result at larger size and slower printing. Material: PLA Layer height: 0.12-0.16 mm (for detail) Nozzle: 0.4 mm Temperature: 200-210…
