1 / 3
Ikea desk hook for bags and more (Ikea UTESPELARE) — image 1
1 / 3

Ikea desk hook for bags and more (Ikea UTESPELARE)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple hook directly mountable on Ikea UTESPELARE frame with its screws

Rating
0 / 5
Likes
4
Downloads
38
Makes
0
Views
187
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a simple hook for your backpack or anything else to be mounted directly on the Ikea UTESPELARE frame…

… or any other, of the same frame size, ~40 mm wide with the screw hole centered.

The model has an in-built notch for the hook alignment (so that it does not rotate). A hole for easy screwing to the table.

 

How much can it hold?

I have been using one of such hooks printed with PETG for a year already with a ~3 kg backpack and did not notice any issues with the print structure.

The final weight the hook can support depends on the material you are using.

 

How to print

  • PETG is recommended since it can hold heavier items (but PLA / PLA+ will also work)
  • 0.2 mm layer +-
  • Supports are not required
  • Print on the side as the model provided to improve the strength

 

Tools required

  • 1x 5mm hex key for the screw

 

How to mount

  • Remove one of the 14 screws holding the tabletop
  • Put the screw through the hook
  • Choose the orientation - it should work two ways
  • Screw it to the table

and that's it. This is the example of the screws we are talking about:

which are mounted here:

*These images belong to Ikea (from the manual) and are used here only for a visual reference to help with the explanation. All rights to the images stay with their owners.

Tags