Ikea desk hook for bags and more (Ikea UTESPELARE)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hook directly mountable on Ikea UTESPELARE frame with its screws
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple hook for your backpack or anything else to be mounted directly on the Ikea UTESPELARE frame…
… or any other, of the same frame size, ~40 mm wide with the screw hole centered.
The model has an in-built notch for the hook alignment (so that it does not rotate). A hole for easy screwing to the table.
How much can it hold?
I have been using one of such hooks printed with PETG for a year already with a ~3 kg backpack and did not notice any issues with the print structure.
The final weight the hook can support depends on the material you are using.
How to print
- PETG is recommended since it can hold heavier items (but PLA / PLA+ will also work)
- 0.2 mm layer +-
- Supports are not required
- Print on the side as the model provided to improve the strength
Tools required
- 1x 5mm hex key for the screw
How to mount
- Remove one of the 14 screws holding the tabletop
- Put the screw through the hook
- Choose the orientation - it should work two ways
- Screw it to the table
and that's it. This is the example of the screws we are talking about:

which are mounted here:

*These images belong to Ikea (from the manual) and are used here only for a visual reference to help with the explanation. All rights to the images stay with their owners.