Counting matching models…
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
Wall Planter with Pentagon design. Features: Drain Hole Re enforced slot to hang with screw Unique design Print instructions Make sure supports are enabled The bottom face of planter is the base for printing ( where drain hole is ) STL…
Print approx. €8.02–€9.80 excl. taxPreliminary estimate for one variant
A seven-sided made of regular pentagons and squares.
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
A pentagonal trapezohedron, a popular shape for 10-sided dice. Dimensions are based on adding pentagonal pyramids to a regular dodecahedron.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
A seven-sided shape made by regular pentagons and trapezoids. The base pentagon is twice the edge length as the top.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
The harder part of the competition task is figuring out why to create tiles using tessellation and what to use it for. If I don't know, then earrings.. Těžší část soutěžní úlohy je přijít na to proč vytvářet dlaždice pomocí teselace a k…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the Pentagonal Flower Pot with Vertical Stripes, a piece that stands at the intersection of avant-garde design and horticultural practicality. This unique pot takes the timeless pentagonal shape and adds a layer of…
Print approx. €18.68–€22.83 excl. taxPreliminary estimate for PETGSource material: PET
A pentagonal bipyramid.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
A connector to make a pentagonal prism out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
A connector to make a pentagonal antiprism out of straws.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
An ornament made from a Pentagonal Icositetrahedron. This was printed with a brim but without support.
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
A twelve-sided shape made of regular pentagons and equilateral triangles.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Johnson solid made of regular triangle, square, pentagon, and decagon faces.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
A low-poly style bottle based on pentagonal shapes. The STL didn't include hollowed volume. It's mean to be printed with Vase Mode. The model shown in the pictures was printed with 0.8 mm nozzle.
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
Elongated pentagonal bipyramid.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
The filament used is Clas Ohlson red PLA 38-7986-3 Filament PLA Universal till 3D-skrivare Clas Ohlson | Clas Ohlson
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
A 25mm diameter button in metric units. Flat face with a filleted pentagonal shape and a wide ridge.
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
A 30mm diameter button in metric units. Flat face with a filleted pentagonal shape and a wide ridge.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This is a sample print using the Terrain2STL site here: http://jthatch.com/Terrain2STL/ Site parameters were NW corner at (38.8898 N, -77.0752 E), box width 0.05 degrees, box height 0.03 degrees, vertical scaling 4. Other parameters as…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I am building a section of the PiBeta calorimeter to do a fit check for some parts to go inside it. The pentagonal shape is what the rest of the hexagonal pieces are arranged around.
Print approx. €18.24–€22.29 excl. taxPreliminary estimate for one variant
this is a simple pentagonal crystal decor
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
A fully parametric polygon fidget. Printing tips: Decrease the printing speed Decrease the cooling fan's speed For a robust handle use 3 walls Ensure a good bed adhesion How to customize your own? You will need to download FreeCAD , a…
this is a model of a pentagon fidget . it collapses and twists and you can sell it !! it has 1.2 mm thick walls with gaps of 1mm. use / sell responsibly
This is a fun print in place fidget I made that is easily disassembled and stacked (photo 2). This fidget is fun to twist and turn and shake and hold. It can be placed on a desk as a fun break from any activity. let the pentagon mesmerize…
Was interested in buying a portable hangboard but didn't feel like the cost of $40+ was justified for what's just a simple wood cutout with some pocket routing. A half hour later I had a model, and 20 hours of printing + roughly $8 worth…
update: 7/18/22: added a small stand to keep rings extended and a version without a raised center. -- print-in-place The sound made when shaking reminds me of a rattle snake or a maraca. (I used eSun PLA+) I developed and printed this as…
I added some color to it. If printing I would scale up to get better details on smaller parts. Found this model on Thangs https://thangs.com/designer/AsSeenOn3d/3d-model/The%20Pentagon.stl-833569.
A cute pentagonal shaped planter with stairs and a self watering/drainage basin design. infill 20% - 2 extra infill walls Filament used in photos - Overture PLA Professional White, Overture Rock Blue
A Pentagonal pyramid aka 5 Sided Pyramid
A planter with pentagonal shape. It has a lower deposit for excess water. Printed in two parts with no supports. Fusion 360 and STEP files attached if you need to modify anything. Modeling explained in YT in Spanish. Spanish Maceta con…
An aesthetically pleasing box with an expanding lock mechanism. Just slide the slider to lock or unlock it. There are three heights available. Also two different slider rings and two expandor design types (v3.0 and 3.1). More options may…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This Pentagonal Trapezohedron was created in CAD by deleting the top and bottom faces of a regular dodecahedron and healing the resulting openings. I've included a 3MF for the print seen in the photos. Print Settings: • Nozzle: 0.4 mm •…
Pentagon art Print without supports See all my other designs by clicking on my profile Support me through Patreon: www.patreon.com/3DPrintBunny Instagram @3DPrintBunny
A pentagonal icositetrahedron is made from 24 pentagons. It is a dual of the snub cube. I include the Openscad code so that students can make modifications. I feel that the code is very elegant and even features a recursive function to…
The full name is "Monohedral convex pentagonal tile, type 15". It is a tessellating shape that was discovered in 2015 by Mann/McLoud/Von Derau. This simple script can create 48 of those shapes with the default settings. They can be given…
Triakis Tetrahedron Triakis Octahedron Triakis Icosahedron Triakis Hexahedron Rhombic Triacontahedron Rhombic Dodecahedron Pentakis Dodecahedron Pentagonal Icositetrahedron(dextro,laevo) Pentagonal Hexecontahedron(dextro,laevo) Disdyakis…
OpenSCAD dodecahedron. Set h to 1 to make rhombic dodecahderon https://en.wikipedia.org/wiki/Dodecahedron#Cartesian_coordinates Printed in: Filaments.ca Blue PLA CCTREE Red TPU If you set h to phi instead of -phi, you get an icosahedron…
Hi! This design is a Pentagonal folding storage Box for Nozzles, that uses a Hook and a Loop for the closing Mechanism. I included a nozzle hole size tester, so you know wich one you should print. The nozzle should go in and out with…
Pentagonal Trapezohedron, also known as a 10-sided dice.
I challenged myself to design this ring holder in under 90 seconds 🤙🤞🤘✌ Watch the design process video here: https://www.instagram.com/reel/CsxR0phu197/ The bottom is a pentagon and it smoothly transitions into a circle to fit the rings a…
This design is based on the Floret Pentagonal Tiling (also known as the 6-fold pentille tiling ), arranged to leave small gaps between each “petal” for natural movement and drape. The pattern forms a beautiful geometric texture that feels…
Hi! I remixed my Pentagonal Nozzle holder and made an SD Card Holder out of it! Cheers ♥
Fun and satisfying fidget toy
I know this is nothing new in general but i decided to make a set of 3d printed straws that are easy and efficient to clean. Printed models used in contact with food and beverages must be cleaned well. This can sometimes be a problem…
This cache pot was made by playing with rounded, twisted pentagonal shapes and "linear_extrusion" in OpenSCAD. The height is set to 12cm but you may choose different heights, ratios and twist rates but please check for manifold if you…
Fünfeckige Dose vier verschiedene Höhen ………………… Pentagonal five sided box four different hights
Handle pentagonal by JLCMC JLCMC automation parts Industrial Automation and Manufacturing-Focused Online Supply Chain at JLCMC jlcmc.com offers different types of automation spare parts for any specifications you need. jlcmc.com is an…
You can ink the grooves / crevices to increase contrast, then resin over them.
Tessellations were used by the Sumerians (about 4000 BC) in building wall decorations formed by patterns of clay tiles. Nowadays, mathematicians try to solve tesselation rules and try to find more possible arrangements. One of the…
Fits on Mini or scale to any size! Stack as high as you want. Add brims if you have trouble with corners. No supports.
Printed to snugly fit 5 benchies for storage or display. Printed in vase mode with 0.9 mm wall and 0.2 layer thickness with 5 layers on bottom.
Like the petals of a flower, this floret pentagonal tiling brings Springtime into our geometry. During Easter, at the crack of Spring, the tiles rearrange and morph into cracked eggs specifically for you to store chocolate eggs inside,…
This cybernetic and geometrically obsessed knob armada is coming to a dance floor near you to assimilate the DJ and make everyone bust a groove. These knobs are remixes from my previous board game ship pieces modified by scaling to…
Thirty Notched Pentagonal Sticks - STC #65 6-color version in individual STL files – pieces are 15 cm long, and 2cm diameter. Single color version in a single STL file. pieces are 9cm by 1.25 cm Dimensions easily adjusted in the OpenSCAD…
Ecco i mie scacchi .. la PEDONE *** Here are my chess pieces... the PAWN
Ecco i mie scacchi .. la CAVALLO *** Here are my chess pieces... the KNIGHT
Make sure to put a bird feeder on your home or gardenia tree because birds have a lot of problems to eat ,and you show social welfare and your humanity and become a good person and print this feeder today and put your skylight on your…
Ecco i mie scacchi .. la REGINA *** Here are my chess pieces... the QUEEN
I modelled this up to put my niece's birthday gift in - she's a huge Owl House fan (who isn't!) and I got her some light glyph ear rings. The packaging they came in was a bit lame, so hence the box. I made it five sided for interest and…
Ecco i mie scacchi .. iniziamo dal RE *** Here are my chess pieces... let's start with the KING
A nice swirly pentagon-based vase/pot/penholder I designed. my print settings printing in clear PETG on an Ender3 V3 SE: *Vase Mode / “Spiralize Outer Contour” *1 wall, 1.6mm thickness *230C nozzle temp *85C bed temp *60mm/s print speed,…
A regular pentagonal bipyramid can be made with the norm 5 and norm 4. Connecting two pentagonal bipyramids together requires the 90 deg 1 and 2. There is a left and right orientation. Edge is used to connect along one of the square sides.
Pictured print was printed with a Mosaic Palette 3. The .3mf was set up for the Palette 3 but should be adaptable for the MMU by removing the post processing script.
Ecco i mie scacchi .. la ALFIERE *** Here are my chess pieces... the BISHOP
Ecco i mie scacchi .. la TORRE *** Here are my chess pieces... the TOWER
This pencil holder has been printed with 0.4mm nozzle, with 0.2mm of height of layers. It is light but stable and can contain many accessories for office or school.
Pentagonal tilings can create some very interesting shapes. This subunit combines to form pentagons. Those pentagons can be combined together. Many designs are possible!
This is a decorative 5-cornered bowl which can be made flat for storage. It is a print-in-place model that requres no assembly other then glueing in some magnets. The model has very tight tolerances so make sure your printer is well…
A fun little fidget toy. Nice to fiddle with when you should be working. Prints without supports. If you make it, please post a print!
Makes a ring of pentagonal bipyramids and other shapes. I haven't tried making one yet so but will report back when I get to printing some units and trying the assembly.
Inspired by one of the works made by David Nichols which he showcased in the youtube video. So i designed a 3D printed version of this model. Material required: 120pc M3 * 5mm flat head phillips screw
A pentagonal container. No supports needed
a knot based on the pentagonal cupola Category: Math Art
a polyknot inspired by Rinus Roelofs Category: Math Art
A knotted epicycloid composed of 5 trefoil knots.
My Personal Pentagonal Pentagram Design.
a polylinknot modeled on a pentagonal antiprism Category: Math Art
Pentagonal Pentagram. Best result is created with aesthetics in mind with Transparent Top Layer. Wall Art.
Can be printed separate or together.... If you paint the Pentagram in OrcaSlicer I would Print the Lid Separate from the box to prevent switching colors a lot and thus excess filament waste.... 50% = Pill Box Size....
print in place no supports need
a polyknot inspired by Rinus Roelofs Category: Math Art
Robux with internal hole made in the shape of in triangle, pentagon or hexagon and double sided
A striking piece of architectural decor. This pentagonal vase features sharp, clean edges and a distinctive beveled top
Use arachne wall generator + random seam position! A compact geometric fidget toy shaped as a pentagon. Its small size makes it easy to carry and comfortable to use with one hand, whether for focused fidgeting or casual play. Ideal as a…
This will be a series of listings of variable shaped containers for gaming that can be freely used and made without violating what Elderwood Academy (Three Frog LLC) claims as their “trade dress.” My designs do not utilize hexagonal…
A toy shamrock for a wooden ball track. Print in any color combination. Intended for tracks with a pitch of 34 mm. For others, you edit by changing the scale :-) Trojlístek pro dřevěnou kuličkoou dráhu. Tiskněte v jakékoliv barevné…
This dodecahedron can be used to stick reflective markers for 3D scanners to it. It's fully parametric when you use Autodesk Fusion. This was built with a free version of Autodesk Fusion hence the license that doesn't allow commercial use…
The goal of this project was to build the throwable LED-"Grenade" used by Jim Holden in the series The Expanse. Steps: Print two main structures in Gray/Black PLA. Print 12 translucent/transparent PLA inserts. Optional: Print the TPU…
Formas pentagonales regulares e irregulares, que a través de la distorsión y la corrección, redefinen la figura clásica del pentágono, que es un sólido platónico.
*This is a remix of https://www.printables.com/model/346298-tripod-phone-mount-14-manfrotto-qr-rc2 so the mount fits on my older pentagon plate for the Manfrotto tripod. *I used…
Summary In this creation, I used sketch offsets, extrudes, and cuts to create my own telescoping fidget that looks like a pentagon but look closer, it isn't! Working with a partner although we did not have the same designs, definitely…
My go at a tensegrity. Pentagon for better stability compared to triangle. Recess on the outline of bottom and top to have only one line going all around on the outside for more easy assembly. ... And in all: 50mm Pentagon for quick print…
