177 models
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for PETGSource material: PET
Würth caliper holder for the perforated plate Introducing the Würth caliper holder for the perforated plate , featuring our innovative Click-In system for effortless installation. This tool holder is designed to provide secure and…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Würth tool holder The Würth tool holder for the Würth perforated plate is designed for the 3 most commen used tools in 3d printing. Attach the tool holder next to your 3d printer and have allways all of your most important tool's next to…
Print approx. €7.66–€9.36 excl. taxPreliminary estimate for one variant
The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.
Print approx. €4.95–€6.05 excl. taxPreliminary estimate for PETGSource material: PET
Tool holder for Wera Kraftform Kompakt VDE 817 with 14 bits (05003474001 / 05006607001) This seems to be the product on Wera website (mine was from amazon [05003474001] without the nice colors 😥)…
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for PETGSource material: PET
-Los pinchos merecen la pena ser impresos con soporte ya que sin el dudo que salga tan definido. -Los tornillos siempre impresos en vertical para que las roscas salgan bien. -Utilizar siempre para productos que vayan a ser cocinados nunca…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This compact perforated board is sized 90 × 90 × ~3 mm with a dense, symmetric hole grid—handy for zip-ties, M2–M3 fasteners, and wire routing. It’s sturdy enough for small brackets and mock-ups, yet quick to print. Also included: four…
Print approx. €6.64–€8.12 excl. taxPreliminary estimate for one variant
This Headphoneholder mounts easily to your perforated wall using a dovetail System. The holes in my perforated wall have a diameter of 5 mm, so I used an M6 tap to fix the headphone holder. If it should have another perforated plate, I…
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for PETGSource material: PET
Tool holder for Wera Kraftform Kompakt 62 with 33 pieces. https://products.wera.de/en/kraftform_kompakt_kraftform_kompakt_without_ratchet_functionality_kraftform_kompakt_60_62_kk_62.html.html (No. 05059297001) This version is for…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for PETGSource material: PET
Voici un gabarit pour découper des abrasifs à la bonne taille (93x230mm) et pour percer les trous en même temps. Le gabarit est fait pour une ponceuse metabo sre 4350 mais je pense qu'il peut convenir à d'autres ponceuses ayant les mêmes…
Print approx. €6.46–€7.90 excl. taxPreliminary estimate for one variant
The Perforated Crate is compatible with SBox for MK2/3 - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36(35)mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39(40)mm x (2.8 - 3)mm or…
The Perforated Crate is compatible with SBox for MINI - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39( 40 )mm x (2.8 - 3)mm…
Elegoo Neptune 4 / 4 Pro cable chain link with a hole in the middle.
Grid Perforated Beads. 20x12mm hole size is 4,5,6,7 and 8mm. Print settings: Filament: PLA Nozzle: 0.40mm Layer height: 0.20mm wall: 2 Supports: no Brim: yes
Thought it might be good to have perforated upper plate risers for the V400 for better ventilation. I wrote a little OpenSCAD file to create lines of cylinders as hole punches, and used Microsoft's free 3D Builder to edit the original STL…
My advice: attach (with superglue) few magnets for mount onto enclosure of AD5X (4-6 will be done).
Bigger hook which fits into perforated panel with 10x10 mm holes and a distance of 38mm. There is a hole in the hook for an M3x8mm screw which you can use to press it more firmly against the panel. Hook have three length variants - 30mm,…
Sturdy hook for a Bott pegboard. Easy to print with 100% infill. Simply print on its side, with 4 walls. Stabiler Haken für eine Bott-Lochwand. Einfach zu drucken mit 100% Infill. Einfach auf der Seite liegend drucken, mit 4 Wänden.
Customized version of https://www.thingiverse.com/thing:5579287 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=5579287 Instructions Using the following options: board_width = 60 board_length = 100…
When the rubber on your mouse has decayed more dramatically than my will to work after vacation — it’s time to 3D print a fresh shell for those sweaty gaming sessions
Based on Perorated_corall_lampshade by Patrik (Thingaverse 480044) Added a base using Prusaslicer (2.5.0) Printed on MK3S+ with MMU2S 0.30 layer at 50% infill for base and 10% infill for coral. Printed at 210/205C and 67/67C
Textured Roll With Perforated Plate Pattern Hey maker! 👋 A texture roller to create a perforated plate pattern on soft materials. Features: Works on foam, clay, plaster, and more – endless creative possibilities! Scaled to 60 mm × 145 mm…
I could not find a decent perf board example so I decided to make my own. I made it parametric so you can make it any size you'd like. This one should compile and render a lot faster than the others. With the other user's models it was…
This is a slightly adjusted version of @dietervdf's paper guide for an ordinary Leitz 5008 perforator. The adjustments in comparison to the original can be found in the git repository . Print Settings Printer Brand: Creality Printer:…
A universal holder for the Hazet perforated wall. The holder has five holes for M4 screws. The holes are 20 mm apart. The middle hole is centrally located. Holder for mounting https://www.printables.com/de/@Boogie/collections/1423434…
A piece of perforated board for hobby electronics. The first model contains a 50x50mm board with 1mm holes and 2.54mm spacing. The board is 1mm thick. The two other model are 1.6mm thick and have bigger holes. 1.35mm holes and 1.5mm…
I created the design parameterized about length, width, height and wall thickness. (Ask if you need specific measures). I use the boxes to store small printed parts. Printing with 0.3mm works, but with 0.2mm or less it looks nicer!…
This is a REMIX from a model originally extracted from a game, edited and shared by Matt Fritz @mfritz I wanted a smaller, easy to carry AKS74-U version, like the Pink Perforator from COD MW, I create a entire new short barrel and…
Sponge holder for dish washing. Easy drain. Easy clean. Can be fully disassembled for cleaning. Would be lovely if it can be made from clear acrylic-like materials.
Printing done on an MK4S+: PETG 0.25mm layer height Outer brim of 5mm All other settings standard.
A simple holder for 10 SDS or SDS Plus bits for a rotary hammer (impact drill/perforator) Features latches and guides so the bits go in the right way and stay in place No additional components required, no assembly, no supports. Prints on…
Le PACdam est un guide de perforation concu pour faciliter la pose de digue dentaire. Il assure un positionnement symetrique et reproductible des perforations sur la feuille de digue. Léger, économique et reutilisable, il s’inspire des…
Hi, these objects are perfect for anyone who wants to have his tools sort and tidy. Print it with your normal settings in PLA or PET. hope you like the model, give me your feedback in the comments. best regards mlax
Simple hook which fits into perforated panel with 10x10 mm holes. There are two version. First have 2.5 mm thick walls, second 3 mm thick walls.
Cross stitching can also be done on perforated paper. When someone uses cloth, the cloth is often clamped in a hoop to keep the cloth tight and give the stitcher something to hold. Perforated paper cannot be clamped into one of these…
Remix suited for Retrofit Minimal Enclosure so plate A modified to comply with ramp mounted screen. Also added substracrive model ( sub-5hex ) so you can make your own design for plates.
Embrace modern style with this functional and breathable 3D printed napkin holder! Measuring 170 millimeters wide, 170 millimeters deep, and 100 millimeters tall, this holder offers ample space for standard-sized paper napkins. Featuring…
Stores sponges & scrubbies in a handy spot that drains into sink.
A sustainable,3d printed alternative to perforated metal rivets for laces Punch a hole and press the washer on the pin. Hole for laces Diameter 8mm The rivet may break trying to remove the washer after fixed Maximum thickness of material…
A very easy‑to‑use embossing machine for paper. Have you ever wondered… “I need a ruler that goes to … infinity ?!” Here’s the solution! The machine’s roller embosses marks on the paper at 2 mm intervals. Every full centimetre is marked…
Attachment hook for perforated plate, perfect for tools like small-medium size spanners/wrench sets. Standard size for 38 mm board. Uses M3 nut and bolt for tighten. Printing setting suggestion: Orientation: On side Infill: 80+% (Gyroid…
Drill holder for Einhel drill, Skadis IKEA perforated panel. Designed with Autodesk Fusion 360, source files available. Designed for the awesome Universal Hook by CSD_Salzburg: https://www.thingiverse.com/thing:2853261 (print 2 copies)…
Perforated covers remix of angry cam by chri.kai.in to prevent OV5640 module from overheating. For me this mod solved overheating issue. EDIT: Added perforated cover for front and additional version of rear cover that suits another…
A pot with perforated lid. I use it to put silica granules inside, but can really be used for anything. Perforation of the lid can easily be suppressed in the original design if you need a solid lid. Closes with a screwing mechanism.…
Tisk : 0.16mm STRUCTURAL @MK3.5 0.3
Created to aerate your hand and add style!
This is a set of perforated slot plugs for the INBXX. (The INBXX is a filament storage option designed by Voxel3d - The must-have for every Prusa Core One owner - or every 3D printer owner for that matter. I personally like it a lot,…
Attachment hook for perforated plate, perfect for tools like small spanners/wrench sets. Printing setting suggestion: Orientation: On side Infill: 80+% (Gyroid or honeycomb) Walls: 6+ Top/Bottom layer: 3 or more Material: PETG or ASA
Longer write-up on my site , since I'm too lazy to go and re-write a whole bunch of stuff here. Website is down due to insufficient film sales to maintain hosting fees. Contents of the article are now posted at the bottom of this page.…
A sustainable,3d printed alternative to perforated metal rivets for laces Punch a hole and press the washer on the pin. Hole for laces Diameter 5mm The rivet may break trying to remove the washer after fixed Maximum thickness of material…
Si tratta di un supporto per una perforatrice quadrata (quadrato da 6mm) acquistabile su aliexpress/amazon che vi permetterà di forare floppy disk 5 1/4 sul lato opposto per utilizzare anche la seconda faccia dello stesso (deve essere…
I wanted a round basket for keys and change. With perforated sides. People like things with holes. That's how this happened. Includes parametric OpenSCAD script, customizer friendly, along with several generated models. The included…
This is a 2 Gang low voltage box cover. I designed it to fit the same box that the RACO 2 Gang Square Box Cover fits. https://www.lowes.com/pd/RACO-2-Gang-Square-Metal-Electrical-Box-Cover/3129183 It's perforated to allow the signal from…
Deutsch: 3D-gedruckter Montagewinkel mit Lochplatte (Pegboard) für den Sculpfun iCube Ultra Lasergravierer. Zur Organisation und Befestigung von Zubehör. Material: PETG/ABS empfohlen. Englisch: 3D-printed angled mounting bracket with…
The awseome cool thing in the openscad model is the ability to place the screw holes on an angle you need. In this case the screw holes have not been evenly spread, but on strange angles.
The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.
Print from the side using supports. Size of the square whole is 10mm, the hook has 9mm.
It has a bit of tolerance and slightly jiggles around, but I prefer that to be able to easier get /store the tool. Printed in PETG, 0.2 layers, 20% infill, with supports and with MMU3, although the text doesn't look so nice (need more…
This pegboard is designed for all the pegboard projects made by Forma. Its is a 50 cm by 50 cm pegboard with 7 mm holes spaced out every 25 mm. -------- Este tablero perforado está diseñado para todos los proyectos hecho por Forma. Es un…
I created this model as i needed to print a new carbon filter cover for my P1S and was frustrated with the printability of the current offering with how they are exact copies of the original which was designed to be molded not FDM…
Ablage Werkstatt Lochplatte 15mm Ablage für die Werkstatt mit abgeschrägten Kanten und Schlitzen seitlich. ------------------- Workshop shelf, perforated plate 15mm Workshop shelf with bevelled edges and slots on the side.
Here I would like to provide a range of hooks for perforated plate walls with keyhole perforations (such as Tegometall). The plate thicknesses vary depending on the manufacturer, so I am including three of the most common models (for…
A simple and practical perforated storage bin for organizing tools, parts, or everyday items. The perforated design reduces material usage and printing time while giving the container a modern industrial look. The holes also allow airflow…
Perforator Mount for Leitz 5008 on Ikea Skadis Pegboard
Improved Hasselblad panoramic mask.
This 3D model is specifically designed to create micro-perforated paper with high precision. Perfect for professional or creative projects that require easy-to-tear sections. Key Features: Precision Perforation : Designed to produce…
The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.
Create more plates at https://www.modelbaker.com/
This multipurpose perforated storage box is perfect for organizing your home or workspace. Its modern design with a perforated pattern allows for ventilation, making it ideal for storing electronics, cables, office supplies, and more. The…
Hooks for xxx pegboard, perforated tool panel
Print Settings Printer: Crane M3D Rafts: No Supports: Yes Resolution: high Infill: high Filament brand: any Filament color: any Filament material: ABS Notes: I use this to fill with moth balls then insert it into a plastic bag lined…
Print Details: Filament: PLA (Silver and White shown to illustrate opaque and translucent forms but any colour that suits personal taste may be used). Layer Height: 0.2mm Infill: 100% (can be scaled as required subject to printer volume.)…
Small hole sizes (~1mm) may require clearing with a toothpick after printing.
Tweaks If you find the hook amount to much, simply use a modifier block and remove the the middle ones You can also only use one screw (and fill the other one with a modifier block) Print Tested with Prusa MK4 & Prusa Slicer (see provided…
Another brain trainer for your pet. Fill it with a snack that fits through the holes. Give it to your pet and watch him try to get to his precious reward. Contains the source fusion360 archive file in the files section. Can be printed…
Perforated Mug for pencils and tools. This is good model if you want to check your printer print quality. Print time about 5h. If you are not Flash then you shouldnt drink coffee from it.
WYSIWYG Parameterized Perforated Half Pipe From: https://www.reddit.com/r/Fusion360/comments/1jbfqo5/problem_with_a_design_no/
I made this because my INBXX has 5x1kg narrow rollers on the upper shelf, and 2x2kg+1x1kg wide rollers on the bottom, and I wanted my PTFE tubes to be further apart when they exited my INBXX.
Caps to close or cover the perforation holes on the backsheet. One has a cutout for the magnetic PSU holder. For mounting use the longer rivets from @BuildX.…
Heyho :) I use perforated plastic bags to make my own tempeh. You can also buy these bags, but they are quite expensive. With this simple help you can evenly punch holes in your bags yourself. Depending on how many holes you want, you can…
Added holes the frame to allow better airflow in front of the filament spool. This is intended to use with the spacer. The added benefit is that it saves material too.
Description: You will find one variant of my pot, I hope you will like it. Please post your prints. I always love to see something I made in others' hands! Print Information: You can print it in vase/spiral mode. However, I still prefer…
I needed a drain-strainer for a 57mm drain hole that would not clog in a laundry trough that can experience large water inflows - with fluff that blocks standard drain-strainers. Not sure of the profile of the strainer that would yield…
Assortement of pegs for pegboard. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: Yes **Resolution:** .2 Infill: 100% **Filament:** […
Mit Hilfe dieses Lochplattensystems ist es moeglich diverse Kleinteile, z.bsp. im Auto etc. zu fixieren. Durch Drucken und Nutzung von mehreren Platten kann das System nahezu "unendlich" erweitert werden. Die Platte hat eine Groesse von…
Caja organizadora con perforaciones Medidas: 20cm x 20cm x 12cm
özellikle renk çatışmalarıyla çok hoş duracak bir kasa tasarımı. Önceliğim bu kaosu en iyi şekilde ortaya çıkarmak!
The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.
hex perforated kilner jar lid 82mm
Hello, I was printing some tool holders for the workshop and I didn't know how to attach them to a plate with a square perforation - wurth so I modeled this dowel. I recommend printing from PETG - 20% infill 2 perimeters
A parametric magnetic tool holder for the IKEA SKADIS pegboard system allowing you to attach screwdrivers and other tools magnetically to your pegboard. More information on the original @orax model page HERE. To avoid the hassle of…
I was having issues with my OV5640 Cam with 120 lens using angrycam mod because of overheat in my Voron Triendra, i was searching some way to upgrade airflow and i have found this mod, unfortunately it was designed for other model of same…
Estas são as peças de plástico que modelei para minha caixa da Anet A8. A caixa foi construída usando perfís de alumínio perfurado que encontrei na Loja "Leroy Merlin", próxima de minha casa. A tampa e a frente da caixa são presas com um…
I created a construction tube that can be printed along with some attachment pieces, then fastened together with standard PC fan screws. You can see my proof of concept in my YouTube video at the bottom of this description! I recommend…
As requested by a Reddit user. The outer diameters are 42 mm, 80 mm and 118 mm. The holes are 6 mm, 8 mm and 10 mm accordingly. The wall thickness is 3 mm. Each ball is split in two halves.
Made a small shelf for my perforator. It has a snug fit, and is fixed that it doesnt fall off. Have fun printing!
