1,653 models
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Model consists of 4 bars (two sides, upper one and lower one) and four connection pieces. The longest one is the side bar and can only be printed diagonally on the bed. Lower bar has two integrated latches that hold the picture from the…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Modular Picture Frame Kit Update 03/06/2026 The metric frame parts 120mm up to 180mm angles were wrong. They were 44.13 degrees and should obviously have been 45 degree cuts for the corners. Thanks to Frey4cre for pointing this out. These…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Easy to assemble stand for a 4”x6” photo frame. Having a few homemade ¾” hardwood photo frames for 4”x6” photos, it was only natural to come up with a sturdy stand for them. Hopefully these will work for you. The stand’s back is around 6”…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
This is simple picture frame with stand. The connection between the front part and the rear part is press-fit. Originally the frame was created for a picture height / width: 105 mm / 150 mm (PictureFrameFront.stl,…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
A simple, modern picture frame stand, with a low profile so that it is hardly noticeable. Fits most picture frames and works for portrait or landscape orientation. Can also be used to stand up signs and other artwork.
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for one variant
This upwards facing picture hook is made for canvas printed posters on wooden frames. They have a closed wooden frame all around and getting them on the wall with a zero gap is difficult with normal picture hooks. That is why I designed…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Salut, This is a simple but effective photo support. It is compatible with photos or drawings from 10x15 to 20x30. I printed in variable height and with the new parameter in Prusaslicer "irregular surface" (thickness 0,1 - distance 0,3).…
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
MAKE YOU OWN ANIMATION - IN OLD WAY Frame templates included - to be printed on A4 paper. Cut the sleeves, glue them together and insert into the barrel. Print instructions glue the stick to the bottom of the barrel
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
The stamp cubes measure 4×4×4 cm. There are 6 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. The cube develops fine motor skills, vocabulary (create stories), and imagination. The cubes have the…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
Polaroid Picture Stand for Fujifilm 8,6cm x 5,4cm. This polaroids are for Fujifilm Instax Mini cameras Formats landscape and portrait availible. No support or infill is required. Download. Slicing. Print or use print files. I am looking…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Hi! I didn't find some nice easy to print simple picture frame for Fujifilm instax mini so i draw 5 models. Really easy to print. You can print the 5 frame on a MK3S in one print with no skirt. Their hole in the back to hang them on some…
Print approx. €7.19–€8.79 excl. taxPreliminary estimate for PETGSource material: PET
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Just a simple minimalistic stand, ideal for birth announcements, postcards, and other pictures.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
This is a small picture frame that fits the Fuji Instax Mini perfectly. I hope you enjoy it. I would love to hear feedback and, better yet, see your prints. I am currently working on a two-color version as well. Printed with .4 nozzle…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
I designed this beautiful frame as a gift where the contents can be revealed by removing a sliding cover. On the inside, there is a recess that holds a piece of paper or thin cardboard in A5 format with the picture or text on it. With the…
Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant
If there are problems with the bed adhesion try to print it with brim.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
OpenScad Script for Customizable LED Box to illuminate Signs or lithophane Pictures with easy Parameters and 3 Parts. Base (or Back) with optional Holes for mounting, Front to keep the Picture in place and a insert to hold the LEDs in…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Print both parts an insert the clip into the base. Depending on the thickness of your card you can use the prefered slot in the base. Display your favourite card or picture. To fit the clamp in the slot it might be easier if the corners…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
The frames are designed to accommodate cards made of either paper, cardboard or paper laminated with foil. The size of the cards is 50mm x 50mm, with the visible cutout measuring 46mm x 46mm. If you want to produce many cards, it is…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
frameX - simple picture frame that can be used universaly, both landscape and portrait mode for 10 x 15 cm pictures printable with PLA with no supports, .gcode file provided for MK3S 3D printer
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
Small hook adaptor for Ikea(or similar) picture frames. I made this one specifically for Ribba Ikea frame and the Command 450g hook. Has a small tab to keep it on the frame while hanging it on the wall. Will update if I run into a…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Set of five fantasy neo goothic architecture pictures (two colours) 20 cm wall art matrix for graphics or frottage
Print approx. €2.74–€3.34 excl. taxPreliminary estimate for one variant
Picture holder - The Rock. Fill: 15%.
Print approx. €0.63–€0.78 excl. taxPreliminary estimate for one variant
You can use either PETG or PLA. Picture frame snaps together. There are two frame sizes available which your Peripage Mini Printer can output. Enjoy :)
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
I got the Mosslanda picture ledge from Ikea. Put it behind the couch, it makes a great shelf for things you need to reach for - no need for a coffee table or end table! Only problem? My coffee mug is too big around to fit comfortably.…
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for one variant
Easy to print as positioned in the .3mf file with a color change. Makes a nice wall hanging display.
Print approx. €4.08–€4.99 excl. taxPreliminary estimate for one variant
Similar model as the original. It can be used for lager pictures. The wall mount is attached to the picture with thin double-sided tape. Use a 4 mm round-head screw to attach the hanger to your wall. On the photos, you see a 70 cm x 50 cm…
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for PETGSource material: PET
I made a magnet from pictures of ponies from PonyTown game. No multimaterial needed just overlaying several layers of different filament colors. filaments order: Prusament Vanilla White Prusament Silver gray Prusament pineapple yellow…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
I made this simple hook to hang my pictures on the wall. The wall was to hard to use nails so i used this with some two sided tape. My recomandation would be to use heavy two sided tape. I used one that can hold up to 80KG. For the…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
The game just ships with a bunch of ziplock bags that are too small, and is a pain to set up and put away. This just makes the game so easy to set up, play, and put away. I designed it to use as little filament as possible, as it is a…
Print approx. €10.85–€13.26 excl. taxPreliminary estimate for one variant
Bei Bildern, die in exakt gleicher Höhe hängen sollen oder Bildern, die mit 2 Aufhängern aufliegen sollen, hilft das kleine Gadget, sie exakt waagerecht auszurichten. Nicht immer läuft der Bohrer ja exakt dort in die Wand, wo man möchte…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Aufsatz für Bauhaus Wasserwage zum leichten anzeichnen der Nagel oder Schraubenposition
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Bei der Montage von Galerieschienen kommt es immer wieder mal vor, dass nicht ausreichend Befestigungsclipse vorhanden sind. Mit Hilfe dieses Clips können die Schienen befestigt werden.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
A minimalist desk sculpture that works like a picture frame. An angular, artistic take on the iconic canadian maple leaf. The leaf rises out of the word Canada, set in the classic Baskerville font. No baseplate. The large leaf slides into…
Print approx. €1.70–€2.07 excl. taxPreliminary estimate for one variant
I split the model in two halfes to be able to print it on my mini. for alignment of the two halfes 3mm dowels (or M3 screws) are used. the gcode is for 0.6mm nozzle
Print approx. €3.62–€4.43 excl. taxPreliminary estimate for one variant
Consider each Polaroid picture as a leaf on your personalized tree. You have the freedom to design your tree or branches based on the number of pictures you wish to display, and you can adjust the number of leaves over time. The frame is…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This model is a double heart-shaped artwork with a rectagular cutouts in the front area, perfectly suited for a small photos measuring 2.8cm x 4cm. This double heart provides a unique way to express your love and affection. Of course it…
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
LED stringed lights support to illuminate pictures
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
I made a magnet from pictures of ponies from PonyTown game. No multimaterial needed just overlaying several layers of different filament colors. filaments order: Prusament Vanilla White Prusament Silver gray Prusament pineapple yellow…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
The project aims to introduce students to the 3D printer, Tinkercad and 3D printing and results in the printed picture dice for language teaching.
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
Picture Hanger for those big wooden frames print it vertically for best stability.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Picture hanger for adhesive hook. Závěs obrázku pro nalepovací háček. PETG
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
hey, wieder einmal ein Auftrag woraus was tolles entstanden ist ein Bügel um Keilrahmen bilder auf kleinem räum zu lagern somit können die bilder auf einer mobilen Kleiderstange aufgehängt werden. gedruckt mit einer 0,4 nozzle und 0,20…
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
Baroque Picture Frame, shown printed in Hatchbox Woodfill PLA at 20% infill and 0.2mm layer height. Picture area is about 4.5" tall and 3.75" wide at full scale. This is a remix of levenement71's beautiful Baroque Picture Frame as an…
I'm collecting old baroque picture frames for some years now to publish my photos in them (and to distract the viewers eye away from the amateurish photos to all the ornaments and shiny stuff). Now as I'm in posession of a 3d-printer (or…
A quick and easy stand for a picture frame.
These french cleat mounting plates can be used to hang your picture frames on the wall. It can be mounted using small screws, double sided tape or glue. The picture frame cleat has a cutout to go around the (often) included nail hook.…
It has 2 versions, one with a slot for customizable plates and one without. The dimensions of the customizable plates are 42x10x1mm. You can make signs in these dimensions yourself, if you have no experience there are many tutorials, e.g.…
This is a Victorian Style Picture Frame, it was made for the PrusaPrinters 3D Contest. I thought about what kind of Frame i would like to print and something came in my mind. This Frame is a very detailed and big print with a lot of…
The picture frame can be scaled easily, but remember to scale everything evenly. The backboard can be adjusted if you want to add a 20x20 piece of glass or acrylic glass. Supports needed. Make sure to disable support for the plug holes. I…
I designed a plate stand off a picture I saw online. It prints in two parts that perfectly fit together, no glue needed. ***Update: Added a thinner version with less protruding ends in front of the plate/picture.*** ***Update: floating…
This Valentine share your love with your soulmate using this beautiful frame saying I Love You Not requiring supports glue its easy to print. Just cut and put your picture and close it. Because its not glued, you can change pictures when…
An abstract picture frame, inspired by the sound-guiding wall cladding of the Elbphilharmonie main concert hall in Hamburg (Germany), also dubbed “weiße Haut” / "white skin". The frame's front side makes full use of the 3D printers'…
This is a print in place picture easel and plate stand. It is 180mm tall so it works really well for 5x7 photos and smaller. I recommend printing in .2mm so the hinges will print in place. Check out my YouTube channel for more maker…
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D Mainly designed for instax film but fits also other pictures. 🛠 Suggested…
Printed with a Bambu P1S in PETG without any supports.
Update 2024-04-11 New framework models for the rear left and rear right. I remove one beam on this. No manual rework necessary. framework-rear-left_1x.stl framework-rear-right_1x.stl This is a modular set of models for a diorama or…
Nail the parts behind picture frames and use a nail or screw in the wall to hang the picture onto. The original part I modeled from is in the first picture. I modeled 2 holes for different sized nails. Cheers! ----------------- Update V2…
This picture frame comes with a backboard that allows for easy assembly and a snug fit. The thick version of the backboard provides more space for thicker materials or accommodates a glass or acrylic sheet over the picture. The frame is…
Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page. For more of my designs check out my website: https://3domengineering.com.au This is a replacement stand…
A Marvel Wall hanging for anybody who enjoys Marvel comics or films. Great as a gift. The logos are: Black Panther, Thanos, Thor, Captain America, Hulk, Captain Marvel, Spiderman and Iron Man. The picture is 185mm square but can be scaled…
Hello makers! Looking for a picture frame for a weirdly sized picture, note, or other flat surface that you wish to display in a frame? This scalable picture frame allows you to quickly make custom-sized pricture frames! It's easy:…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Build your own custom-sized frame…
As Valentine’s Day is just around the corner, Deltaprints is once again bringing you something perfectly suited for the occasion. A beautiful, playful heart-shaped photo frame that stands on additional hearts and instantly catches the eye…
The realization of Mona Lias's frame model was part of an insane commission that I had only one week for. I have printed several parts in true scale and glued a total of 20 pieces onto a wooden frame. I don't expect you to print out the…
A Star Wars Wall hanging for anybody who enjoys the iconic Star Wars films. Great as a gift. The picture is 184mm square but can be scaled to suit your printer, available with or without a wall fixing. You need to print this with 'detect…
This was based on an old picture frame (see photos) with a painting inside it. I scanned the image using realitycapture. Cleaned up in blender. Good luck printing! Included are the original shape, plus a more letterbox / wide angle shape.…
I designed this to support some document frames which are 9mm wide as well as a lithophane which is 4mm wide. I've included STLs for 2mm through 12mm in .5mm increments with tilt angles set 1 degree less steep for each 4mm of increased…
Two picture frames, 1:12 scale - actual sizes 30mm x 30mm & 50mm x 30mm. The included Fusion360 file is is presently set to 50 x 30mm but it’s very parameterised, so anything is possible. Have fun!
Create you Star Wars Ep. IV - A New Hope - Trench Run framed WallArt. You'll need a picture Frame from IKEA (RÖDALM, 54x27 cm), and double sided adhesive tape (or glue). Print 40 Tiles (in any combination to your liking) of the 12…
small picture holder for instax mini photos can be mounted to the wall with a small nail or put on a desk or shelf with the stand. I have also included a mount that holds standard 4x6 pictures the stand also works with 4x6 pictures in…
This was a quick and dirty picture frame I created for one of my kids. The back slid into the frame surprising well. The models should be oriented in the position I used to print them. You shouldn't need any supports. Print Settings…
Important: The gaps in the model are 0.2-0.3mm wide. It is recommended to check your printer's tolerances before printing this. If the gaps are too small, set a negative XY-compensation setting in Prusaslicer to increase the gap sizes.…
Material: PLA Printing speed 100mm/s Support No Plate adhesion No 15% filling
Simple plate or picture stand, holder.
You can use this frame to backlight 4 Litophane pictures at the same time. Choose suitable images, print them according to the instructions below. Then print the frame and you have a nice gift for your next birthday. Assembly Such fairy…
Simple magnetic picture frame tuned for a 4x6 print. Easily modified if you know openscad but the provide stl files will work as-is Holes are for insertion of standard magnets you can find on ebay Instructions: Print in two pieces…
This is a 5x7 picture frame with picture support and a brace to hold everything together. Created a slide in stand that attaches to the holes in the picture brace. The picture is placed in the frame, then the back plate, then the brace to…
Nice picture frame for horizontal or vertical pictures. Mabe the perfect gift for valentines day?! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: 3D Jake PLA Silver…
A minimalist frame for your art prints! I've found often at craft fairs / farmers markets / art markets, I can buy an art print from local artists and they will come either on a 1/8 in thick foam board or wrapped in protective film. To…
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
Walt Disney Pictures logo in 3D. 5mm high.
Update - still finetuning the model, but current stl is okay to use! Update - 03.12.2017 - Update Model with smaller tolerances! Small project to generate a picture frame for my new Instax Mini Camera. Designed to be used horizontal and…
I had this IKEA frame on my bed side table that does not stay up anymore. That's why I built this stand to keep it at 20° angle. The picture frame is 20cm x 30cm x 3cm. I also added the fusion 360 file so you can customize it for your…
🖼 A4 Size 3D Printable Picture Frame – Modular, Minimalist & Secure Showcase your favorite photos, artworks, or prints with this sleek and modern A4-size picture frame – fully 3D printable and easy to assemble! Designed with simplicity…
Porta retratos personalizable de diferentes tamaños 50x70, 70x100 y 100x150. El porta retratos tiene dos orificios (10 mm de separación) para insertar símbolos nombres etc y personalizarlo. Customizable photo frames in different sizes…
This is a low profile hook specifically designed to allow framed pictures to sit well on an Ikea Skadis pegboard system. Sometimes the frame does not want to sit flat against the board or has a desktop mount which causes it to twist. In…
This picture frame is designed to fit any rectangular sized picture and requires no supports. In PrusaSlicer: Scale the X and Y dimensions for the back plate to the dimensions of your picture (e.g., 150mm x 100mm) Then scale the length of…
A simple picture stand that should fit most instant camera pictures by customizing! Based on LuminDesignLab's design. 🧾Instructions (very fast & easy & online): here is a detailed up-to-date tutorial on how to customize online:…
The whole model uses about 90 grams of filament. I do 15% infill, Snug supports along the interior of the frame, no supports on the holes on the back of the frame fillets down on the picture backer. I also use .1mm layer heights to keep…
a simple stand for pictures or calendar pictures
The Ultimate Picture Frame is a one-of-a-kind modular 3D printable design that allows you to create a frame of virtually any size from just a small selection of pieces to ensure that no art is left unframed. It is easy to print, requires…
