Low Profile Sawtooth Picture Frame Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.08 – €0.10 net (excluding VAT)
For file: picture_frame_sawtooth_0.4n_0.1mm_PETG_MK4S_6m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Sawtooth picture frame mount for low profile hanging
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 146
- Makes
- 4
- Views
- 351
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D printing with chamfered base and soft corners.
I also designed a version with a midpoint marker on the top side so it was easier to align with center on a frame. The middle tooth can also be used to define the center of the bracket.