Counting matching models…
Remix of a design by J-Max from https://www.thingiverse.com/thing:1306832 These are corner square clamps in 30 variations used for woodworking to hold two pieces 90 degrees square during a glue-up or pocket-hole join. Regular clamps of…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Soporte para taza , hecho para el cockpits Wheel Stand 2.0 Next Level Racing con el logotipo moza , la distancia entre agujeros es de 40mm para tornillos cónico de M6, si deseas cambiar las letras por otras o quitarlas y no sabes hacerlo…
Introducing the TurboSnail Part Cooler for the Pitstop Extruder. Expect this to perform on part with the Prusa shroud given a moderate bump in fan speed to compensate for the added restriction. The idea is to have a smaller, more directed…
Head unit + GoPro style mount that attaches to the Canyon integrated handlebars. Tested with over 20 000km in all conditions, with a Garmin 840 Solar + Bontrager Ion light. I can't vouch for robustness if you use something heavier. Print…
This is a modified version of the PitStop Extruder (created by Mihai Designs) backplate + Adapted-Revised-X-Axis to allow for the use of linear rails instead of smooth rods + LM8U bearings. Bill of Materials: Parts from original revised…
This is a nameplate base for the Torbol Quad Pitstop Backpack pro. Please print with flexible material or TPU for better results. Use any 3d file editor to add your name.
The nozzle connects the hose to the vacuum cleaner. According to multiple websites it is compatible with devices from Siemens, Bosch, Grimi, Krups and Pitsos. For 35 mm Ø hose (Hose outer diameter 40mm). I personally used it for the…
This allows anyone with a Prusa MK3 or MK3S to mod their printer to use the Pitstop for better cooling, and the Mosquito Hot End (smaller, lighter and reliable). With this design you can replace the nozzle without taking anything apart. I…
I use this stand for my MiniCockpits MiniFCU to secure it with Velcro to an IKEA Elloven monitor stand. I've infilled the inlaid lettering with some white UV resin to finish it, but this is obviously not necessary for a functional stand.
This model is sized perfectly for melting the prusa mmu2s bowden coupler into the 3d printed part Print instructions Printer - Prusa Mk3s Infill - 20% Gyroid Supports - None
After two large releases in the last weeks, I'll just tidy up a bit and release some smaller things, which are still essential for a good wargaming table! a) Craters: Difficult or cover terrain, you know how to use them! b) Tar Pits:…
No support needed if printed upside down. Logo is separate part that needs to be glued on afterwards.
A new fan grill for the pitstop extruder, multi color print
The pin swerves togehter and holds the plastic wrap in the package. espacially after you hade to take out the roll when the wrap did got stuck. The full lenght when screwed togehter is 340mm. The female part have a lenght of 178mm. The…
To cover the colorful Noctua Fan or the PitStop-Extruder and bring it back into the color concept.
You need to melt a threaded insert (4mm metric) to the upper part and screw it together. The hinge ha a hole for an 2mm metric screw with a screw nut. Maybe you need to tape the cockpit to avoid damage.
Print out the top and stick it to the bottom using superglue. (designed for printing in PLA with no supports needed). Running a bead of hot glue from a glue stick behind the joint will make it even stronger. Stick some etched drain covers…
A snack bowl joined to a smaller side bowl, so pistachio shells, olive stones, cherry pits and prawn tails have somewhere to go. Also good for edamame, sunflower seeds, lychees and clementine peel, or as a dip and crisps bowl. Print in a…
This is a remix of MihaiDesign's awesome PitStop 1.2 extruder. The 1.2 version of the PitStop does not appear to be here on Thingiverse, so if you want to use these parts, you'll need to go to the MihaiDesigns website and get them. This…
I made this pencil case after seeing a YouTube short of the Enpitsu Check Alpha pencil case: I made this pencil case for myself, but decided to share it online, since it prints very well and is pretty sturdy. The pencilholder part holds…
After two large releases in the last weeks, I'll just tidy up a bit and release some smaller things, which are still essential for a good wargaming table! a) Craters: Difficult or cover terrain, you know how to use them! b) Tar Pits:…
A sturdy, sleek and easily 3D-printable mount for Wahoo and Garmin bike computers with integrated mount for lights or action cameras. The mount can be printed with minimal supports and the computer mount is fully integrated in the part…
This is a replacement nose cap for Pitsco AP (Air Powered) rockets. The refill pack (sku 35692) includes rubber caps to go on the nose of the rocket, but we managed to lose a large number of those caps, so I designed this replacement…
These parts are for making the Pitsco Mini Straw Rocket Launcher ( http://www.pitsco.com/Mini_Straw_Rocket_Launcher?ap=3602-4096 ) more accurate and repeatable. By snapping on the Angle Indicator, you can more precisely align the angle of…
A remix of the RHD CS NOZZLE for the pitstop extruder. Angle and attachment of radial fan was altered. A spacer was created to adapt from original mounting holes. Printability was improved (I think) by an addition of a fin inside the…
1x MGN12H Lineární kolejnic 350mm 4x M3x5mm countersunk screws
