14 models
mostly every owner of a makita pj7000 knows the problem with the vac hose connection - it doesn't fit to most european vac models. So i made this part here, just open the lid like for changing the sawblade and pull out the adapter. You…
Additional fence for the Makita PJ7000 biscuit joiner Parameter: Walls: 3 Infill: 15% Infill patttern: gyroid Support: yes Material: PETG or PLA , 112g (incl. support) Disclaimer The use of this attachment for the Makita PJ7000 is at your…
Makita PJ7000 to Festool 27mm CLEANTEC hose connector. Replace existing hose connector.
Adapter für die Oberfräse Makita PJ7000 zu Festool D27 Schlauchanschluss. Ersetzt den vorhandenen Adapter.
I remixed the adapter from @gwendal ( https://www.printables.com/model/68024-pj7000-festool-adapter ) since his was not properly working with my Festool Cleantec.
This simple fence makes it easier to use the Makita Biscuit joiner vertically. It simply bolts into some factory holes at the rear of the bottom sole. There are two small inserts that prevent some M6 nuts from spinning inside of the case.…
Just a quick adapter to use with a standard festool hose. Works perfectly fine and has a snug fit. Category: DIY
This 3DW osVAC Adapter for Makita DPJ180 /PJ7000 replaces the original hose connector. You must transfer the o-ring of the original adapter to this osvac adapter. Lubricate the adapter with a little grease and insert it. In the pictures…
I created this adapter version because my previous design was too weak and snapped when printed vertically on my FDM printer. This version is meant to be printed horizontally, which results in a much stronger adapter when printed on FDM…
Handle for the Makita PJ7000 plate joiner which makes it more comfortable to use for me. The handle is mounted with a M6x15 countersunk screw and a M6 locknut. For mounting a hole with countersunk is needed, for the position see photo.…
Replace the cable with a plugit adapter. The change is reversible. Work in tandem with the CLEANTEC hose connector . Needed: Festool replacement part #489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable…
Vacuum Adapter: Makita Biscuit Jointer to Bosch Click and Clean System. You will need an O-ring with a 25 mm ID and a thickness of 1.5 mm, which belongs in the smaller groove. To print a nice, sharp bottom surface for the inner lip, I…
Vacuum adapter to connect a Kärcher WD6 with a Makita PJ7000
Dust extraction adapter for the Makita PJ7000J biscuit jointer. Size: Ø49.5 × 71 mm. Part of my set of dust extraction adapters that connect my (mostly Makita) power tools to a Narex VYS 33-21 L shop vacuum – see the collection Makita…
![osVAC Adapter M32-PJ7000 [sturdy] (Makita Biscuit Jointer)](https://media.printables.com/media/prints/649299/images/5122850_088a5448-cb3a-47f0-bc84-bf35238d01c5_b376caa5-0f1c-4a82-ade1-6fa5bc543378/osvac_makita_pj7000_split_01.jpg)
