Counting matching models…
A stand for charging your phone while it's plugged into an outlet. It can be placed on vertical or horizontal outlets. The tray is also reversible. It has small notches on the sides to secure the charging cable if you want to leave the…
I wanted to meet two requirements with this model: The holder should be able to hold as many pot lids as possible and make perfect use of the available space in the drawer. Gentlemen, I can say that of all the 3D prints I have made so…
Motivation When bulding a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that allows…
A colleague asked me if I could print him a dart holder. Of course I said that shouldn't be a problem and if he already had an idea? I recommended the usual websites and he came back with something that looked like a hedgehog. When I took…
Das Modell ist auch 2-teilig, aber ohne Kleber einfach zusammensteckbar
I liked the design of the pluggable pot lid holder. But we recently bought some Tefal Ingenio pots and pans. The lids of those are interchangable, but also very shallow. Therefore the original models didn't work. I simply shortened the…
I needed this for a project. STEP files included.
This is a specialized version of the 'Pluggable Containers' thing: https://www.thingiverse.com/thing:4675184 . It lets you create different symmetrical pluggable containers in the openSCAD and thingiverse customizer. These could be used…
DOWNLOAD → ❤ I have designed a shelf holder that is very easy to assemble. it can be dismantled into two parts and can therefore be screwed together very easily. when the screws are mounted you can simply slide in the second part.
This is an openscad library that lets you design a lot of different pluggable containers easily. It works quite well as far as I have tested it, but be careful because it is still work in progress. For some printers it might be necessary…
Tiny Whoop 65mm Levelling calibration stand with room to leave the usb plugged in on the table.
This device is intended to make unpluggin a EU type E/F main plug easy to remove, wether you have some reduced hand mobility or not. Easy to print under 30 minutes, requires no support, no assembly required (two mobile pieces printed in…
Object description: I don't like the variants with glued-in or firmly pressed-in magnets. That's why I designed a variant that makes it easy to push the magnets in and out, but at the same time guarantees a secure fit. Base models are…
Pluggable tea light collector. Can be pluged together in the desired size and layout. Ideal for not having to store loosely tealights anymore, they are ideal for quick preparation in the kitchen.
A specific version of my phone stand adapted for Schuko-type sockets. Some users have told me that the previous model did not hold firmly enough with some types of chargers; this responds to those suggestions. The great advantage of this…
Colour variety with BOB I find a colored object that always looks better on children than a monochrome one. But since not everyone has a multicolor printer and they use a lot of material, I tried a different solution with BOB. It's not…
August 13, 2021 This is a plug-in mini shelf that you can combine as you like. I use it for my printed Benchy variants. With the console parts you can hang it at the wall, the panels can be used to get a smooth top without rails. Sept.…
This is a remix of the excellent "Multimeter holder for HSW" by Kudeiro. While the original model fits the multimeter perfectly, I found it inconvenient to have to unplug the probes from the bottom ports every time I wanted to dock the…
This is a redesign of my own plug-in mini-shelf Pluggable mini shelf von Findusdwarf | Kostenloses STL-Modell herunterladen | Printables.com ---- This is a plug-in mini shelf that you can mix and match as you like. I use it for my printed…
Allgemeines Ich fand das Originalmodell sehr cool und habe es daraufhin ein wenig für mich angepasst. Druckeinstellungen Drucker: BambuLab P1s , X1C oder P1P Schichthöhe: 0,2mm Infill: 9-15% Bienenwabe Vertikale Perimeter: 3-4 Decke- &…
Object description: I don't like the variants with glued-in or firmly pressed-in magnets. That's why I designed a variant that makes it easy to push the magnets in and out, but at the same time guarantees a secure fit. Comments: Models…
================================================================== This model can be printed as is (3 plug slots), or parameterized through Fusion360. Recommended Parameters: Box Depth (Front to Back distance) Quantity of plug slots (This…
knob for axles with a diameter of 5/6mm. You can ask me for other sizes or simply scale the whole thing in the slicer.
a simple easy2print xmas ornament no supports needed have fun
Have you been draining your Intex Easy Setup Pool, and found the inside drain plug likes to close on itself and as a result stops the draining? This simple tapered cone fits into the drain hole, but sticks out far enough to prevent the…
This printed part attaches an inexpensive Pluggable USB Microscope to an InnoGear Microphone Boom Arm . It might work with other boom arms as well, and also uses a ¼-20 screw, so it might have other possible applications. I'd consider…
a simple easy2print xmas ornament no supports needed have fun
Great baseplate design to just simply insert the magnets without needing glue or hammer. Reduced to two magnets to save on filament. Notes: Use 6x2 mm Magnets To connect multiple base plates use Dovetails from…
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
Remixed model to add more tolerance to fit new variant of the original model
This is an adapter for ½" Loc Line (The kind you might find on some helping hands tools). It holds this usb microscope which I've been using for electronics repair and work. The stand that comes with it secures with a suction cup, which…
If you want to access the bearings you will need to disassemble the motor. This can be quite challenging in some cases. How to use Put the part onto the motor as shown in the pictures, then gently hit it with a hammer until the motor…
I needed a stand for some Nintendo DS games, but didn't have any nuts and bolts on hand. So I adapted 16 Bit Virtual Studios' design and made it pluggable (Print as shown in picture 3). You can also print two sides without connector. For…
Wish a "Merry Christmas" in 4 languages, and send this in an envelope to your loved ones. If you do not have an multi material or dual extruder printer, take the "single material" file.
An opera balcony, composed of 3 parts, pluggable, wall-mountable, lighting possible, for placing e.g. Mini 13, Dummy 13, Lucky 13 figures (print at 150%). I made it for the figures of statler and waldorf from Alex as you can see at the…
This model of a simple balancing scale was created to be used as a teaching aid in an “unplugged” activity regarding sorting algorithms. The material might be used in computer science or maths classes to give students the opportunity to…
I have a pluggable thunderbolt 3 dock at my desk and wanted a better mounting situation. I traced the profile of the dock and made an SVG, loaded it into TinkerCad and came out with this. I don't have a thunderbolt 4 dock to test with,…
When I saw all the beautiful prints here, I thought to myself, wow, what must they have time to create such things. I don't have that time. So it was clear to me that it had to be "quick and dirty". The result is a pluggable, relatively…
I wanted to extend my IKEA RÅSHULT furniture by hanging a PLUGGHÅST from it's side. There are no hooks, so I made some. Successfully printed in PLA on a Prusa i3 MK3S+
I was looking for a tea light that could be sent in an envelope as a kind of Christmas greeting card. There are a lot of tea lights here, but I haven't found one that folds or is pluggable. So I thought about how it could work, that the…
Ikea Plasta plugg (Backplate) I chose to turn my ikea platsa, the corners where the back plate is visible so had to find a solution for that. Then made a plug that is pushed straight into place. Print Settings Printer Brand: CR-10 SE…
Slotted tube with plug. The plug has a hole in the top to insert a threaded knob. Category: Biology
a nerf barrel plug so you wouldnt dryfire your blaster i made in a maximum of 5 minutes this tool probaly already exists somewhere in the internet but im too lazy to find the file for it you may use an mallet or you may need teflon i dont…
Here is my way of protecting our plugged in appliance from our mini-us. The cover fits around the existing cover and leaves enough space for the power cord to be plugged in and exiting this box. The box is held in place with a single…
I just switched some parts on my rig, so I couldnt fit my screen to my wheelbase anymore. Wanted a solution which can be attached easily and removed if needed for some scenarios. With this holder glued to your display you can easily…
Twenty One Pilots MTV unplugged Album Hueforge! |-/ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max…
Keeps cords/plugs in outlets. Prevents cords from being unplugged. Created to keep a fire alarm backup battery from being yanked. Remix of Outlet Plug Protector by Ari.
A recreation of the plug that fits in the drain of the washbasin on a Campervan. The O ring is 33mm diameter.
a pluggable desk organizer which is easy to plugge together. I printet it with 5% Infill and supports. It holds very strong together but is easy to remove. You can skale it if you want. A NEW VERSION IS COMING SOONE WHICH DONT NEEDS…
Made for a friend, maybe somebody has the same gamer tags and is interested in :) The letters can be plugged into the groundplate.
The bars should fit quite tight into the x-holes. Dimensions: Bars: 185mm / horizontal space between the plates: 170mm Plate small: 100mm x 70mm x 5mm Plate big: 140mm x 70mm x 5mm If you need other measurements, let me know ;-)
Dropped my printer power cord behind the cabinet 4 times in a row. No more. Wall mountable IEC cable hanger. Will save my sanity when doing printer maintenance.
This is my take on this brilliant idea. Perfect gadget for every home appliance that requires often unplugging. What I've changed: Strenghtened overall design Changed lever design Adjusted some thin walls and overhangs to improve…
.... here we have a pluggable chopstick holder easy to print without support you can print it in .1, .2 or .3 layer height to shorten the printing time even more recommended setting 4 outer walls 20% infill honeycomb 5 top layers 5 bottom…
UNPlugged, by Bruce Wright I intend to use my phone less often. I try to break the reflex of filling any spare moment by looking at my phone. But that intention is hard to put into action. So what if I moved the intention into an object.…
I have several CO2 sensors in use to control the ventilation unit of our house. (Sensirion SCD30 sensor + ESP32). The micro controller is powered with a standard 5V USB charger. The sensor housing is attached with a clamp to the USB…
Only to be used for a short period of time! Made to plug the washer-fluid quick connector when repairing other parts of the car that needed to disconnect the quick connector. Printed with 0.2 layer height in PLA. If you want to use it for…
Preamble Please regard the following informations as my report of a solution to re-use the Shelly PM mini Gen3 devices as pluggable energymeter. Use the provided models and described procedures completely at your own risk and at your own…
Bearing press & pulling toolset for 72mm linkage bearings for Bold (Scott) MTB Linkin / Unplugged.
Similar to my other model, but now with louvres. This should prevent direct solar radiation on the sensor and hides the electronics inside. For best results, I had to add some supports like on the picture below, the rest prints ok (on…
Inspiration At work we have Manuflex® industrial tables for lab usage. I missed a part to deal up with cables lying or hanging around there. So I played around with OpenSCAD to design something useful for that that purpose. These tables…
The grip adapter makes plugging and unplugging the connectors easier while protecting both the wires and your fingers. The numbers can optionally be printed in a different color when using multi-color 3D printing. | Part of my Retractor…
Work in progress... Christmas time is approaching and it's time to start our X-Mas projects now. So I dare to provide an early release of my latest model railway project... After successfully performing several test prints and pillar…
This is a simple Distributor Hub that I sketched up in an afternoon, printed and wired together. You can connect your control station with up to 4 consumers (be that multiple rail blocks, accessory decoders, etc). Using these standard…
An opera balcony, composed of 3 parts, pluggable, wall-mountable, lighting possible, for placing e.g. Mini 13, Dummy 13, Lucky 13 figures (print at 150%). I made it for the figures of statler and waldorf from Alex as you can see at the…
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
Simple replacement net cup for the Harvey hydroponic system. The size and form does not match the original net cup so no guarantee that the original plugs fits without modifying them a bit. Changed it to make it simpler to 3d print.…
Inspiration At work we have Manuflex® industrial tables for lab usage. I missed a part to deal up with cables lying or hanging around there. So I played around with OpenSCAD to design something useful for that that purpose. These tables…
A stand for charging your phone while it's plugged into an outlet. It can be placed on vertical or horizontal outlets. The tray is also reversible. It has small notches on the sides to secure the charging cable if you want to leave the…
Keeps cords/plugs in outlets. Prevents cords from being unplugged. Created to keep a fire alarm backup battery from being yanked. Remix of Outlet Plug Protector by Ari.
A specific version of my phone stand adapted for Schuko-type sockets. Some users have told me that the previous model did not hold firmly enough with some types of chargers; this responds to those suggestions. The great advantage of this…
Remixed model to add more tolerance to fit new variant of the original model
A minimal Gridfinity baseplate for IKEA PLUGGIS stackable bins. I've included the original full sized STL as well as a 4-piece split model to be printed on smaller printers. The split version was just split by the slicer, but since the…
Just a dummy KCD11 switch to plug panel hole after I removed the actual switch. Dimensions of KCD11 attached. The switch can be printed flat, but I recommend 45 degree tilt as that is more robust.
Simple replacement net cup for the Harvey hydroponic system. The size and form does not match the original net cup so no guarantee that the original plugs fits without modifying them a bit. Changed it to make it simpler to 3d print.…
Ikea Plasta plugg. Bought a Plasta cabinet from IKEA. But it needed to stand in a different direction, then screws became visible. Then created a plug that solves this problem. Just push it into place and it sits there. Print Settings…
Plasta backplate plugg Print Settings Printer Brand: CR-10 SE Printer: Creality Rafts: No Supports: No Infill: 100 Category: Replacement Parts
