Gridfinity bins, side plugged magnet, for individual inserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity system with geometrical locked magnet. No glue required. The magnet can be pushed in and out very easily.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 76
- Makes
- 0
- Views
- 590
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Object description:
I don't like the variants with glued-in or firmly pressed-in magnets. That's why I designed a variant that makes it easy to push the magnets in and out, but at the same time guarantees a secure fit.
Comments:
Models are supplied in all sizes from 1x1x1 up to 5x5x7, with and without stacking lip.
As it is a lot of work to create additional 180 variants, the models without the weight reduction pocket will be uploaded later. If you need already one of them, please send me a message. I'll then upload this version earlier.
For individual inserts you can remove the shape you need by adding a negative volume in the slicer.
Other gridfinity models using the same sidemounting system for the magnets:
| Description | Link |
|---|---|
| Gridfinity bases: | Bases |
| Gridfinity AA-Battery holder, normal & vasemode: | AA-Battery holder |
| Gridfinity AAA-Battery holder, normal & vasemode: | AAA-Battery holder |
| Gridfinity for Ruthex threaded insert tips: | Ruthex tips holder |
| Gridfinity holder for drill bit box: | Drill bit box holder |
| Gridfinity base for Allen key holder: | Allen key holder |
Important notes:
Before printing, please check that the bridge section looks like this:
Reference:
The main dimensions are based on the gridfinity master dimensions defined by Zack Freedman.
Print settings:
Material: PLA, PETG or ABS/ASA.
Layer height: 0,2mm / 0,3mm
Nozzle diameter: 0,4mm / 0,6mm
Brim: no
Support: no