Gridfinity bins, side plugged magnet, for individual inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity system with geometrical locked magnet. No glue required. The magnet can be pushed in and out very easily.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Object description:
I don't like the variants with glued-in or firmly pressed-in magnets. That's why I designed a variant that makes it easy to push the magnets in and out, but at the same time guarantees a secure fit.
Comments:
Models are supplied in all sizes from 1x1x1 up to 5x5x7, with and without stacking lip.
As it is a lot of work to create additional 180 variants, the models without the weight reduction pocket will be uploaded later. If you need already one of them, please send me a message. I'll then upload this version earlier.
For individual inserts you can remove the shape you need by adding a negative volume in the slicer.
Other gridfinity models using the same sidemounting system for the magnets:
| Description | Link |
|---|---|
| Gridfinity bases: | Bases |
| Gridfinity AA-Battery holder, normal & vasemode: | AA-Battery holder |
| Gridfinity AAA-Battery holder, normal & vasemode: | AAA-Battery holder |
| Gridfinity for Ruthex threaded insert tips: | Ruthex tips holder |
| Gridfinity holder for drill bit box: | Drill bit box holder |
| Gridfinity base for Allen key holder: | Allen key holder |
Important notes:
Before printing, please check that the bridge section looks like this:
Reference:
The main dimensions are based on the gridfinity master dimensions defined by Zack Freedman.
Print settings:
Material: PLA, PETG or ABS/ASA.
Layer height: 0,2mm / 0,3mm
Nozzle diameter: 0,4mm / 0,6mm
Brim: no
Support: no