Counting matching models…
Placed my new EIBOS Polyphemus filament dryer above the printer and noticed that the PTFE tube made a very small angle which caused friction. This piece would easily adapt to the Polyphemus handle and allow it to be slid along it as…
This adds a base to put spools and other parts on the Polyphemus that won't fit otherwise. Use with rotation disabled. Select material based on what you want to dry.
This is a desiccant container for the EIBOS Polyphemus filament dryer. It can contain up to 32g of desiccant each. To open up the closed container, push in between the two taps. When inserted into the desiccant tray of the EIBOS, lock the…
I recently tested out the Eibos Polyphemus filament dryer and made a few replacement parts for it. The handle included with the unit is two halves held together with a couple of small screws. It is functional but it feels a little flimsy.…
Using the Polyphemus "as is" is quite disconforting. I wanted to improve usability. Putting the whole lid + expansion to pieces, I assembled it in reverse, putting the expansion on the top, and not the bottom. I modeled the frame part so…
The Eibos Polyphemus is an excellent 3D filament drier that works well and has lots of great features. If used when printing, the one awkward part of the design is the PTFE tubes feed through the top of the lid and the whole transparent…
One of the rubber feet on my printer fell off in shipping. I wanted to improve upon those and add risers for better airflow into the air intake. So I designed 3 different style feet, Blue's (5mm Riser), Purple's (12.5mm Riser) and Red's…
UPDATE 06/08/2024: Added a version without the threaded ports as per a request. This remix of the original Eibos Polyphemus 3kg extension frame adds ports for PC4-M10 pneumatic fittings and a lip on top to keep the dryer lid in place. I…
I really like the Eibos Polyphemus filament dryer but it is a pain to open the lid every time I need to change a spool or feed filament. The mod that falcon14141 has made is an awesome improvement. I did not have ECAS connectors on hand,…
I was unhappy about the amount of desiccant I could fit in the built-in slots in the Eibos Polyphemus dryer, so I made this insert canister to hold more! Highlights: - Holds 250g of desiccant - Fits securely in the built-in slots - Good…
Time for another ship! This one had a particularly tricky hull, but I was able to do it. HMS Polyphemus is the only real-life example of an Ironclad Torpedo-ram ever built, and it just so happens that HG Well's HMS Thunderchild also…
Not a perfect model but works well enough for me. The angled version is much better with some rubber feet installed, if you have any lying around. A blob of hot glue or something might work as well. I scaled the dimensions to 240mm x…
This is a handle for the Eibos Polyphemus with a cool hex pattern. Print Settings: Material: PETG Layer height: 0.20mm Perimeters: 3
Channel the terror of Homer's Odyssey with this Polyphemus Bust ! The most infamous of all Cyclopes, Polyphemus was the savage shepherd who trapped Odysseus and his men in his cave. This brutal son of Poseidon represents raw, untamed fury…
MAJ V2: retrait de matière pour économiser du filament à l'impression (non testé mais il devrait s'imprimer mieux et plus rapidement), chanfreins sur les filetages centraux pour un assemblage plus facile. --- Conception permettant de…
This is a set of models that can be printed in TPU to improve the airtightness of the Eibos Polyphemus. I don't have a measure for how well they work, but they might help a bit. Keep in mind that this does in now way prevent moisture from…
Simple remix to print the spacer as one part instead of two
50mm riser Stand for the Eibos Polyphemus. I build it to bring the Eibos Polyphemus to one level with my printer, optimize the filament path and provide better airflow for the dryer (I never had an airflow issue :-) ) I printed the riser…
I took @falcon1441 original model split it, added alignment pins and so the top and bottom lid portions would be able to print on my Bambu Lab P1S. A little glue between the pinned parts keeps it real nice while bolting everything up.…
I have a lot of 3kg Esun spools and needed this filament dryer to fit them. I wanted to use the existing 3kg Eibos extension and all of the acrylic panels that came with the kit. This mod still maintains the ability to lift the top on and…
I recently bought a Eibos Polyphemus & noticed that it can be used as a dry box, si i printed off the dessicant trays. I then designed & printed of these bungs to help keep the box sealed. Idealy print these off in TPU, about 60% infill (…
A solid, one-piece, handle for the EIBOS polyphemus filament dryer. The original handle is made of 2 pieces screwed together, and it has a light and cheap feeling. A 3D printed part in PETG/ABS/ASA feels much better. There are a few…
Intro This chamber is meant to stand ontop of an Eibos Polyphemus base as a temporary chamber when drying up to 300mm diameter, ~158mm width spools. This covers most 3 and 5kg spools. Design The chamber is designed to fit into a 256mm…
My drive wheel fell apart on my 1 month old polyphemus dryer. The wheel split into 3 parts. The oring should sit proud at one end as the original does. The wheel apparently does not contact the roller constantly it is only a small portion…
An original interpretation of Polyphemus, the Cyclops from Homer’s Odyssey , created as a detailed 3D printable statue. The model is provided as an STL that can be scaled to suit your printer, preferred display size, and printing setup .…
The main riser parts attach to the top of the existing lid and provide a surface for the four rubber feet of another unit to sit on top. You need two riser parts per lid. The existing screws from the Polyphemus lid are reused. There are…
There are two types: a bottom tray that fits onto the rollers of the Polyphemus, and the top tray. You can stack up to 4 trays on top of each other. The trays are printed in PETG because it is more heat-resistant than PLA. I found that…
These snap-fit, parametrized riser feet are designed for the Eibos Polyphemus filament dryer. They increase airflow for improved performance and feature an optional dampener, which must be printed from TPU 95A, 85A for optimal vibration…
For real, love the dryer, but i have not seen any injection molded plastic (for the handle part) at such poor quality for past 5-8years. Remixed from @Nordfpv 's handle design, now with bigger hole to accept 4mm driver bit holder to go…
I designed this cartridge to fit in the Eibos Polyphemus. It allows you to dry desiccant packs at the same time as one spool of filament or all by itself. I printed mine in ABS for higher heat resistance. I have included the sliced file…
I recently purchased a Polyphemus filament drier and found that getting filament into/out of it was a bit ‘clunky' especially in comparison to my RepBox. However, the RepBox didn't provide filament drying or humidity control. While…
The dryer display shows the values at the heating outlet, not inside the box. For a better overview, I added another thermometer/hygrometer under the lid, where I have unused filament outlets and there is a suitable empty space with good…
Wenn man den Grundentwurf nutzt, kann der hintere waagerechte Ausgang für das Filament nicht genutzt werden.
Polyphemus Bust Inspired by the most iconic depiction of Polyphemus, this 3D printable bust captures the raw power of one of Greek mythology's most legendary figures. The deeply carved hair, imposing beard, and distinctive single eye have…
Spool cheeks to enlarge a 250 gramme spool so that it works in the Eibos Polyphemus dryer This is all about wishing to dry filament on small spools (250 grammes) typically those supplied by Sunlu in their multi-spool bundle packs…
I have my Eibos Polyphemus dryers placed above my printer. The bottom PTFE holes are horisontal and I wanted them to angle down. Printed in ASA.
A remix of this very handy design. I needed a steeper angle for the PTFE entry due to the dryer position and the large spools I use. Note, I have this mod installed also -…
I recently bought a Eibos Polyphemus & noticed that it can be used as a dry box, si i printed off the dessicant trays. I then designed & printed of these bungs to help keep the box sealed. Idealy print these off in TPU, about 60% infill (…
Wenn man den Grundentwurf nutzt, kann der hintere waagerechte Ausgang für das Filament nicht genutzt werden.
Spool cheeks to enlarge a 250 gramme spool so that it works in the Eibos Polyphemus dryer This is all about wishing to dry filament on small spools (250 grammes) typically those supplied by Sunlu in their multi-spool bundle packs…
