19 models
Dies ist eine Sortierkiste mit Schnappverschluss und verschiedenen Einsätzen. Somit kann die benötigte Fachgröße einfach zusammengestellt werden. Die Einsätze haben eine innere Höhe von 25 mm sowie eine Breite und Länge in einem Rastermaß…
Dass die Katze die Tür nicht aufbekommt
The original mounts for the Ikea Hoppvalds are L shaped, made to be put on the walls. I wanted to try putting the blinds instead of wardrobe doors, so I designed this mount that you can put on top of your wardrobe. You'll need a M4 nut…
On the first gen of IKEA Hoppvals there is a double spring pulley mechanism and the pully can break, here is a replacement. If your version has a long spring instead of pulleys then this is not for you.
Ikea Hoppvals blinds are not designed to be trimmed to a custom width. The spring mount in the top frame is riveted in a fixed position. This end cap allows you to mount the spring using a zip-tie. Thus creating the possibility to trim…
When the plastic handle you need to pull your blinds breaks, here is the solution. Use the original handle lip and just print the replacement of the clip that attaches to the blind's lower bar.
I used the original endpiece of the IKEA HOPPVALS blind to design this one. I removed the top piece of plastic to accommodate a hanger that was positioned closer to the edge of the blind than the original end-stop would allow. (I did not…
Printables does not like Solid Edge .par files, those can be found here: https://www.thingiverse.com/thing:5256265/files Window shade / window blind pull "Claw base" is for IKEA Hoppvals (Coming Soon: "Loop" style attachment for Tretur…
For holding IKEA Hoppvals pull down cellular blinds. Remixed from a very good design by @Splashdown_576581 . Added a notch on the outside upper edge, because our window surround has a small piece of trim along the top that was keeping…
For using the Ikea Hoppvals jalouise with a curtain rail (width 6 mm). Printing 50% Infill Used PLA Layer thickness: 0.2 mm Print duration on Ender 3 Pro: 1 h 7 min for both Mounting Needs 4 M4 screw with nuts Perhaps M3 screws would also…
Griff kann, wie im Bild ersichtlich, zusammengesteckt werden und benötigt keinen Kleber! Drucker: Bambulab X1E Düse: 0,4mm Schichthöhe: - 0,2 mm - Markisengriffhälfte - 0,1 mm - Pin Wandlinien: 3 Fülldichte: 41% Füllmuster: Dreiecke…
Remove the end plates of your hoppvalls blinds and replace them with this print My Patreon: Http://patreon.com/Pirulero
stabile Box M6-Innensechskantschrauben und M6-Muttern Dichtung aus TPU (trotzdem nicht wasserdicht) Beispiel: 3D-Maus-Box
Ceilingmount for ikea Hoppvals curtains using modified endcaps. 1.5cm space is required on each side of the curtain.
Ich würde es in PETG ausdrucken, da es fester als PLA ist. Bei mir funktioniert das Teil super.
An edit of @Splashdown_576581 great design to mount the blinds directly to the window without the need to drill holes.
I looked for a solution to install the blind as close to the curtain track as possible
Dies ist eine Sortierkiste mit Schnappverschluss und verschiedenen Einsätzen. Somit kann die benötigte Fachgröße einfach zusammengestellt werden. Die Einsätze haben eine innere Höhe von 25 mm sowie eine Breite und Länge in einem Rastermaß…
After having issues of the belt slipping out of the Y axis on the mini for years in our farm environment. Constantly reprinting the original design, or some of the other "fixes". But they all suffer from the same flaw, after a while the…
