392 models
Hey Guys, Here are my Creality K1/ K1C/ K1 Max/ Orca Slicer , Quality, Speed, and Stealth Profiles for 0.4 Tested on K1, K1 Max, K1C Hotends. (Standard, CHT, Unicorn) If you are using the RetroGlide Gantry Mod You can find my latest…
Please give it a 💖 if you like it 🥰 Edit 2024-07-28 : Flavor updated Edit 2024-07-13 : Added a “Quality Profile” Added the thumbnails to preview models on the printer 👉 Link to my Ender 3 V3 SE Profile 👉 Link to my Ender 3 V3 Profile 👉 My…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
Please give it a 💖 if you like it 🥰 Edit 2024-08-29 : Import error of the Ender 3 V3 Plus for Cura solved Edit 2024-07-28 : Added a “Quality Profile” Added the Ender 3 V3 Plus 👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 SE…
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.
Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…
Hi everyone, since official profiles for the Anycubic Kobra 2 Pro are not available for OrcaSlicer, I created one based on the official profiles that Anycubic made for PrusaSlicer with a couple of improvements such as easier to remove…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
UPDATED profiles for OrcaSlicer 1.9 and up. ( Download the slicer here ) Sharing some 0.4 and 0.6 profiles for the Flsun V400 using OrcaSlicer. Files are for Vanilla Klipper or Flsun Klipper (only difference is the Start and End gcodes).…
Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…
This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…
Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. Main things I've noticed made a difference were : Layer Height, of course The printing…
Here are the Orca Profiles that I setup to get quality but quick prints
Please give it a 💖 if you like it 🥰 🪧 My 8 colors Splitter for Kobra 3 👉 https://www.printables.com/model/1019258-8-colors-on-anycubic-kobra-3-combo-splitter-for-8 Please leave a comment if you have any possible improvements to make to…
Prusa Slicer Profiles for Creality K1 and K1 max The model is just there, cause I needed one to upload the Profiles. Can ignore it. There are two config files. load both Included : - PLA high flow Material Profile (Custom Gcode Added for…
What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…
2020 Extruded Aluminum - Profiles Collection - Parametrico/Parametric - Adjust the Z scale to obtain longer profiles Available in 5 variants: 2020 4 Sides Open 2020 1 Sides Open 2020 2 Sides Open (90°) 2020 2 Sides Open (180°) 2020 3…
Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…
Updated 1/25/23 I have programmed better cura profiles for the FLSun V400 printer. i am currently needing beta testers to help tweak the default parameters of these profiles Please stay up to date on changes and updates at the GitHub…
These are the settings I currently use for my Kobra 2 Neo with OrcaSlicer, I will try to update them if I find any good tweaks. In order to use them: -Printer: Kobra 2 Neo V1 -Filament: Any / make your own -Process: Use the processes that…
HOW TO INSTALL PROFILES NEW UPDATE 22.11.25 Petg-hs profile added. NEW UPDATE V1.5.1 19/08-25 - First layer fan turned off, Gcode for bed mesh profile have been added NEW UPDATE V1.5.3 26.09.25 - Changes to support settings, Zhop and…
Update 8/27: Adding Orcaslicer klipper speed profiles. Adding Orcaslicer printer profile and slicing profiles to this for max speed benchy (25:52 benchy) without sacrificing quality, and a general profile for normal detailed prints that I…
*EDIT Some people ding the design to not fit exacly from what i found out not all 40x40/80x80 frames are exacly those dimensions i based the design on a Simlab frame. I took over my sim rig from a friend, but it was missing a few end caps…
🚨 Latest version will always be found on the OSS Klipper Configuration repo. These config bundles can be imported into SS and PS. Printers SV06/Plus SV07/Plus Features Printer profiles. The best print settings in the universe (yes, even…
Changelog: Added Polymaker Polymax PC (4/23/23). Note that default elephant foot compensation may be insufficient for this filament and you may need to increase it in your slicer profile. Alternatively, you can change the Z-offset for…
EDIT: I added a RAR with all files in one!!! A small collection of aluminum profiles to print adapters or other things for your printer. If you can use it please leave a like there. Please support me and leave a like there. It's just a…
Sharing Cura Profiles for the Bambu Lab X1 Carbon. Could be a good stating point for those who want to print PlanePrint RC planes that require the P3 Surface profile. If you want to use these profiles, I highly suggest using Cura 5.3.1…
After you have generated the g-code, delete the entire header block. Otherwise, the g-code won't work! The Ultimaker S-line firmware will check the firmware version and say that G-code file cannot be printed because it contains an…
I am sending a pre-configured sovol sv08 profiles file materials such as PLA, PLA-SILK, ABS, ASA, PETG you can mosify and experience improvements have fun profiles are in a zip file I added pla wood in the test version, set the speed as…
Profiles were taken from Anycubic Slicer Beta based on Orca Slicer To transfer profiles you will need to install Anycubic Slicer Beta 1) Before starting, I recommend completely removing Orca Slicer. To uninstall, run the file: "C:\Program…
Overview A good starting point for the Fiberon line of filaments for the Qidi Plus 4. These filament profiles are for a .4 nozzle and are for Orca Slicer . Download Download the file normally, this should open up the file in a new tab in…
since there was no profile for the Kobra 2 Neo in OrcaSlicer, I created one for it. more things can be set here, even compared to the prusaslicer. In this gcode, you already draw the cleaning strip at the back, as with the Kobra 2 Pro…
I love sim-racing, but I also want all the cables neatly tucked away. That's why I designed a clip that can easily slide into the rails of any type of aluminum profile. Once inserted, you can rotate it 90 degrees to secure it in place.…
I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…
Some of us like printing big, or filaments with large particles, or just generally hate clogs, and with that comes using larger nozzles. This is a merger of the current 1.7.1 stock Bambu start/end GCode, ThruTheFrame's improvements, and…
This slide nut (or t-nut) fits perfectly into the Prusa MK3/MK3s extrusion profiles (Or any standard 3030 profile). It allows you to add attachments to your extrusions and is cheaper than an aluminium nut. Requirements: 1x M4 nut Print…
I've designed a collection of simple, round plant saucers to complement your gardening needs, focusing on both aesthetic and functional versatility. Each saucer features a unique rim profile, allowing you to match it seamlessly with…
3-way connector 2020 profiles / Corner Bracket HEAVY-DUTY REV2 - Giunzione a 3 vie per profilo alluminio 2020 Key Upgrades: ✔ Support-Free Printing : Optimized geometry eliminates the need for supports—saving time and material. ✔ Enhanced…
I have designed some T-nut inserts with self-tapping threads. For softer plastics, you should be able to tap the screw directly into the nut. For harder plastics, you may need to use a thread tap. If you find that the tolerances are too…
Orca Slicer and Bambu Studio 1.7 beta Creality CR-6 Se and Max printer profiles. Supports many different layer heights and 0.2,0.3,0.4,0.5,0.6,0.8,1.0 nozzles on both machines. If you installed the previous version please remove the files…
Be careful and don't tighten too hard the nuts and don't worry with a high infill is really strong. I use it to attach my accessories :
3030 Tslot Aluminium Profile 4 sides open Adjust the Z scale to obtain longer profiles All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thx
Start G-Code: M211 S0 ; disable travel limits G92 E0 ;reset extruder G28 ;home M420 S1 Z10 ;use bed mesh G1 Z10.0 F4000 move Z axis G1 X-10 Y20 Z10 F5000.0 ;move to start position G92 E0 ;zero the extruded length G1 F200 E10 ;extrude ooze…
My Orca Slicer profiles can be found in the “ other files ” section. Some model print faster with standard settings. You need to adjust, infill density, support if needed, miniatures has the support settings. Try them if you looking for…
Easy model to secure cable width a ziptie or a strap to extrusion profiles. Just rotate 90° the part into the profile and you are ready to fix the cables.
Anycubic Kobra S1 Combo - Anycubic Slicer Next 3d printing profiles: - 0.08 mm Printing Profiles - 0.12 mm Printing Profiles - 0.16 mm Printing Profiles - 0.20 mm Printing Profiles - 0.24 mm Printing Profiles After you will save the…
I made the company profile better and made a new one for .2mm
There are of course already some variants. But I wanted one that is a bit more stable and covers the screws. On my Vyper the V-Slot profile is a bit wider on the right side. I recommend to print the cover for testing and then adjust the…
4040 Rv2 Series V-slot T-slot Extruded Aluminum - Profiles Collection - Adjust the Z scale to obtain longer profiles Available in 5 variants: 4040 4 Sides Open 4040 1 Sides Open 4040 2 Sides Open (90°) 4040 2 Sides Open (180°) 4040 3…
🛠 Optimized Print Profiles for Creality K1C with Linear Rails (RAIL MOD) 🔧 Description Here is my custom profile collection for the Creality K1C . Each profile is tuned to ensure optimal print quality , even at high speeds , whether…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
Printable Printer feet for M3, M4, and M5 Bolts and Countersunk Bolts
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
I printed everything 0.20mm with 100% fill. The T-nuts and T-Bolts can be secured in a 3030 profile by turning them a quarter turn. Pay attention when tightening the nuts etc, tight is tight. The length of the screws are 8mm to tighten…
update 14/05/2025: As some people had issues with the previous file, I did some tests again and made new preset files. update 30/01/2025: As per a request I got, I added a print profile for an UltiMaker 2+ with a 0.6mm nozzle installed
V názvu STL je uveden potřebný počet dílů pro úpravu. Například: Článek řetězu X x21 , x21 znamená že k úpravě je potřeba 21ks Všechny potřebné modely naleznete v Prusa Mini complete Axis Cable Chain and Mounts + blinding profiles.zip
T-Nut Profile in unterschiedlichen Ausführungen und Längen. Von Nut 5 10mm - 300mm über Nut 6 10mm -300mm und Nut 8 10mm - 300mm Anfragen für 3D-Drucke, CNC Fräsungen, Laser-Gravuren an [email protected] YouTube: Arduino, Lichttechnik,…
Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…
I was not able to find a kit yet with pre-cut aluminum profiles, so I spent some time designing fully 3d printed version of the top hat compatible with the hinges and the locking system. There are two version, one 80mm and the other one…
Bambulabs X1 and P1 series printers have a very fast benchy on their SD card that prints in roughly 17 minutes. However, this speed can't be reached with default settings, even when cranking the printer into ludicrous mode. This project…
Orca PLA, PLA+, PLA-HS, PETG, ABS and TPU profiles for the Flsun S1 and S1Pro Delta printer. 0.2 - 0.16 - 0.12 For ABS and ASA i suggests that you turn up the bed temperature manual to a 100 °c for 45 minuts, before starting the print.…
M4, M5, M6 T-Nut Assortment for following Alu Profiles: - Rose und Krieger - Item - Flexlink - Bosch / Rexroth - Minitec Thread is included. Can be printed with 0.15mm Layerheight. OnShape Links: Bosch/Rexroth…
This set includes dimensionally accurate CAD models of the OpenBuilds V-Slot aluminum extrusion profiles in 2020, 2040, and 4040 formats. Designed for engineering, prototyping, and 3D printing applications, these models are ideal for use…
a set V-slot profiles that can be scale to the desired length of your project.
Simple multi-purpose hinge adapted for aluminium profiles. Symmetric single design plus printed pin or screw. Print two identical parts and a pin, or use a long M4, M6 or M8 screw as hinge pin, for the 2020, 3030, 4040 profiles…
SV07 Profiles and calibration guide. Black Friday is coming up, and the SV07 is the printer recommendation for those that can't afford a MK4 (yet!). With Klipper and a volcano hotend, it can print much faster than other bed-slingers at…
Its designed to be placed over a 4040 or 8040 extrusion and bolted on with 2 M8 screws. Feel free to ask any questions if theres something unclear.
diversos modelos todos d e 200mm, si necesitas una longitud diferente no dudes en pedirla.
My Flsun Slicer profile solves some blobs, cooling and under-extrusion issues of the default Flsun Slicer profile for the T1 Pro. For Prusaslicer: I need a few more days to improve a little the profile and I will publish it here 🙂 For…
Inspired by the popular profile systems on the market. I tried to make one that is easy to print and also strong enough for some small projects. I am also working on some additional components and connector systems to make it even more…
EN: These are remix variants of martonas excellent revision of my original debris bucket . His version improves my design as it can be printed without support and hooked firmly into the 3030 profiles. It also stabilises slot-in nozzle…
I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…
There are threee options with different diameters. 12, 10 and 8mm.
Endcaps for aluminiumsprofile 40x40, 40x80, 40x120 and 40x160
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Well its a config bundle and so you have to import it first. If you slice benchy with this profile you will get a benchy in 8 minutes. This is just an upload of the Prusa's profiles used for the example gcode that comes with the printer.…
Cable clip for aluminium profiles 20x20.
Hello, this is an optimized very Strong Corner Bracket/Winkel for Aluminium Extrusion Profiles like ITEM in 40x40 size with holes for M6 Screws. I optimized the structur to have the strongest layer lines, how you can see in the pictures…
To customize your pulley and download the STL file: ----> https://www.sol75.com/customizer/timing_pulley_if <---- Easy to print, no supports needed. Available tooth profiles: GT2 2mm GT2 3mm T 2.5mm T 5mm T 10mm T 20mm On www.sol75.com…
A minimum format. PRINT IT, CLIP IT !!! just cross a zip tie through it to secure your cables!
I wanted to mount some cables to my Prusa MINI's Z alu profile using something reusable - that's how this rachet was born. The "T-nut ratchet for 30 mm alu extrusion profile.stl" contains a pocket for an M3 nut. You can fix it with a 15…
These are my BondTech Mosquito profiles for PLA and PETG for MK3S for 0.4mm nozzle.
(For smaller illustration models, look here: https://www.printables.com/model/675613-steel-profiles-illustration-models ) All STL files are according to standards shown below. Print info: - All stl's are 100mm in height - Print upright,…
just add: some bicycle brake cable or something else for the axis doors out of 3mm acrylic glass (or whatever material you like) some m3 bolts and nuts, washers one m3 t-nut
T-Nut for 20x20 Aluminum or ABS Profiles. ---------------------------------------------------------------------------------------------------------------- Welcome to my Page. If you enjoy my content, and would like to show your support,…
Support for Fanatec CSL DD used for 40x80 aluminum profiles sim rig. No supports are required. M6 bolts for securing the CSL DD and M8 bolts for the 40x80 profiles.
Remix of the Fanatec QR1 wheel mount in order to attach it directly to an 8040 profile of your simrig
Connects 2020 aluminium profiles with two M5x10 cylinderhead screws Print with 100% infill for max. strength.
A cables clamp / clip. Insert it rotated 90° to the slot of the extrusion and twist to lock (use force as needed, it won't break). This is a remix of https://www.thingiverse.com/thing:2613532 (which makes this a remix of a remix). I liked…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
Als Fuß für die 30x30 mm Typ B Schienen. Gedruckt mit TPU - einfach aufstecken und gut is.
Aluminum extrusion based sim racing rig mount for an Apple iPad 2. This is a remix of https://www.thingiverse.com/thing:550592 . Made for 8040 extrusions with 8mm slot. Designed to be used with the M6x12 screws and T-nuts that come with…
A collection of butterflies for our enjoyment. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2mm Infill: Your Discretion. Filament: Any Any Any Notes: These were designed to fit within a 200mm…
Broke my z-mount by accident, so I decided to make a new one for a different position. This support is orientable and fits on 2020 and 2040 profiles. Can be used to mount different things like a Raspberry PI Camera, Smarphone, etc to your…
This is a Flexible Flat Cover to be used on aluminum profiles like a Sim Racing Rig for example and with it you can give it some color.
I used PLA, PETG, ABS with 0,30mm layers and 40% gyroid infill.
