29 models
This is a replacement clamp/clutch piece for the ProLine LST2BK speaker stand, which has an outer tube diameter of 38mm (lower part of stand) and an inner tube diameter of 35mm (upper part of stand). There is an M6 nut and bolt that clamp…
The HSP 108015 axle shaft has a thread that is too short to use it with the original adapter. I reduced the thickness of the hub from 4 to 2.2mm. See drawing. That blind hole is there on purpose. Helps generating supports better. Remove…
These tires #10188 will fit the Traxxas proline style rims. TPU is best and I did 4 walls at 25% infill for added durability but they are a bit stiff. I will try fewer walls and 10% infill and see how they hold up. They will print faster…
Specialy for the proline xmaxx body you need only 4 screws m3 or m4 20mm long
Roof Skids for Proline Brute Body They attach through the body support. Drill a 3mm hole through the 4 holes in the body support through the roof. Required: (4) M3 nuts (4) M3 x 20 screws Category: R/C Vehicles
Man. Those Proline Secure-Loc Caps are really expensive! Good thing you can 3D print your own. I've made two versions. The first one is compatible with a 7mm M4 threaded heat insert The second one has a 4mm hole that threads directly on…
There are cheap RC Short Course Truck wheels on Amazon that come with different hex and offset adapters but are inconveniently missing the “0 offset” 12mm hex inserts necessary for the wheels to fit under a Traxxas Slash 4x4 body. I…
The Proline Wheel Adapter is designed to fit wheels with a 14mm hex and a 6x30 bolt pattern. Print in Petg or ABS. Please leave feed back for model and i can update
Simple (side / rear) window (mesh / grill / armor) for your Proline Wrangler Rubicon 3336-00. Use 4x M2.5 screws on the corners of each side or whatever floats your boat ! The recessed "tube-shaped area" or whatever you call that(please…
Not really a remix of Niko.hogh's model, but I figured it'd be a good idea to have these models linked. Made for a M4 threaded insert. I let the insert hang out a little to space the turbo up slightly, and keep from scratching the lexan.…
One of our customers asked us to repair their fridge handle, so we redesigned it with Fusion 360 and printed it. Don't know exactly which model is it, but it's a Proline Fridge. Hope it will be useful. Print it with the screw holes facing…
Back down-back up. Front down-front up. Bolts required for fastening: M3x12-14mm 7 pcs. Proline MONSTER FUSION BODY PETG best material.
I needed a different offset from what the stock options provided I don't know what offset the stock narrow one is but this one adds 3 mm to it. I have also made the hex 2mm deeper for strength (if your car has fake brake calipers then…
This is a bumper for the Proline 1/10 Chevy Nova No Prep RC body shell, it is contoured to support the front of the body and can be modified on the back end to suit your chassis.
I model this locking lever to replace two broken levers on my Dolica Proline Tripod. The hole in the lever is supposed to be 4.3mm but I had a hard time printing it on the exact measurements. On my prints, the clearance was consistently…
My original Compaq drive rails were missing, so I reverse-engineered and recreated a replacement set. These rails allow standard 5.25" drives to be mounted using the original Compaq sliding rail system. Tested successfully with a Compaq…
TPU rear wing protector for the Arrma Granite Grom with the optional Proline rear wing, to give the wing a little extra protection from getting knackered when landing upside down. The geometry is pretty much spot on, as you can see in the…
These are to replace the Proline Carbine center hubs by a more realistic look.
very strong if printed in 100% esun PETG 3mm holes to be drilled for use with original attachment pins.
I designed these bed inserts for the Proline 46 Dodge RC body. Mine are printed with wood filament and look great. I only included one each of the center long and short inserts, so you'll need to print extras of those by themselves. Print…
Easy to print!
KA ProLine switch mount for Alpine SPPH410100 microswitch
Print facedown on a texture plate with supports. 4 Walls, 60%+ infill for PLA. ABS or Carbon PLA recommended.
After the handle on our washing machine broke, I took out the assembly and modelled it. There was an obvious weakpoint which caused breakage so I upgraded it a bit, to also make it more print-friendly. Mine was printed in ASA with…
GaggiaBoard V2 Housing Base for KA ProLine
My original Compaq hard drive mounting frame was missing, so I reverse-engineered and recreated a replacement. This frame allows a standard hard drive to be mounted using the original Compaq mounting system. Tested successfully in my own…
My original Compaq front cover was damaged, so I reverse-engineered and recreated a replacement. This cover is designed to fit the original Compaq mounting system and includes the characteristic guide rails and mounting tabs. Tested…
A fully customizable retractor holder for the Polaris Proline dive compass, designed in OpenSCAD. Can be secured with M3 screws or a zip tie. Created with AI assistance.
