22 models
Print the parts flat, without support. I printed theml with PET plastic bottle filament : https://hackaday.io/project/185196-pullstruder-from-plastic-bottle-to-pet-filament But should work with PETG but PET is stronger. When printed bend…
Changement pour la mise en place que je trouvais un peu fastidieuse , et pouvoir l'enlever un peu plus rapidement lors de la fabrication de pièces haute
-I recommend printing from PETG with 100% infill. -The part is not symmetrical, you will need to reflect the 2nd half in the slicer. -I use Hobbywing 65A G2, most likely it will fit other ESC
This is a rugged motor protection for the Impulse RC Apex frame. I made this to protect my motors in bandos. Each TPU is around 8 grams. Printing tips : - Use auto orientation if your slicer supports it. It should rotate it so that the…
Side shield to protect your FC. Only suitable for the pro version with the O3 aluminum fairing Printed in TPU small with supports Infill 100%
2 protections pour la camera Air Unit 04 Lite. une en conservant la coque d'origine DJI et l'autre sans ! 2 style differents Facile à imprimer et à installer ! vous avez 1 seul axe pour la fixation il vous faut 2 ecrous M2 pour…
PROTECTION POUR CAM DJI, DJI03, DJI04, WALKSNAIL PRO.
A case that can provide enough protection for your phone. https://makerworld.com/zh/models/403221 If you like it, please subscribe me. Print Settings Printer Brand: Bambulabs Printer: Bambu X1C **Rafts:** Doesn't Matter Supports: Yes…
I re-designed those tube side protections to make them look the same as my real Jeep Wrangler. In the pictures you can see the right orientation for printing. Use raft anf tree supports. I used Overture Black Matte PLA 0,1 layer and 50%…
This is a simple protective cap for M8 threads. I designed it to protect the threads of my balcony solar system. The model has no thread, but is designed so that the fit provides sufficient clamping force and has a small insertion bevel…
In addition to the my other accessories I have created a version for the standard PRIMO - even if you see the alu frame on the fotos. These accessories contain the following parts: * Drag-Chain-Mounts for 25mm pipes They can be used for…
handle protection for kugoo s3 and some other scooters and bikes
Similar to the earlier version of MPCNC I have directly modified and optimized a couple of thing at my MPCNC PRIMO. Especially for a better calibration but also stability I have built the MPCNC on a Alu frame (30 x 30 mm) B-Type Nut 8.…
There are two versions: V1 (picture with white prints) is a simple dust protection I use for some schuko sockets in my wood workshop V2 (pictures with black print) is also protected from liquids and is used for a UPS No support is…
Bonjour, voici 2 protections pour votre moteur zenoah, elles sont à mettre sur le ventury alu du carburateur et l'autre sur la sortie échappement du moteur idéal pour le stockage lorsque le moteur ne sert pas et est stocker Print Settings…
When cutting with Fiber Laser , use this set of protective components for CO2 mirrors, tube and head. They are designed for the GWEIKE M3/M2 Laser Cutter systems . I was not satisfied by the systems of caps placed on the various hood…
TPU protections for the T7 potable SSD. Includes slots to hold the included cables, comes in 2 versions, one for the C to C cable ("..1_C") and one for the A to C cable ("..1_A"). I used a small piece of 3mm line to attach the top cap to…
Simple container with protections
protections latérales jeno 3.5" DJI O3 en PLA
Protections pour kwad 5", a mettre sur les bras pour eviter un arrachement des cables sur drone avec esc 4en1 .
Motor protections and soft mounts for SR-5 You can put these soft mounts in two ways, above or below the arm. Print Settings Printer: Dagoma Discoeasy Rafts: No Supports: No Infill: 33% Notes: TPU Category: Other
