Co2 path components protections for GWEIKE M2/M3 Laser Cutter

When cutting with Fiber Laser, use this set of protective components for CO2 mirrors, tube and head.
They are designed for the GWEIKE M3/M2 Laser Cutter systems.

I was not satisfied by the systems of caps placed on the various hood holes, as the smoke is free to spread everywhere and not just through those holes ... Hence I designed this.

STLs and STEPs attached.

Bill of materials to build your own :

Pliers model 1, for the mirrors:

• 1 - M1 arm up

• 1 - M1 arm down

• 1 - 9x20x0.8 mm spring

• 1 - 28x3.1 mm O ring

• 1 - M3 14 mm flat head screw

• 1 - M3 bolt

Pliers model 2, for the one-way mirror:

• 1 - M2 arm up

• 1 - M2 arm down

• 1 - 9x20x0.8 mm spring

• 2 - 24x2.4 mm O rings

• 1 - M3 12 mm flat head screw and bolt

Pliers docking rings:

• 1 - Docking ring

• 2 - 8x3 mm magnets

Caps for the Co2 tube, head entry and head exit:

• 1 - Cap

• 1 - 8x3mm magnet

Materials can be found on AMZ...

You can print the various components using PETG:

• 0.2mm layers

• 15 % fill

• 4 perimeters

• no support