Counting matching models…
Modern Halloween Pumpkin decoration. The model is 90 mm tall and 123mm wide, the standard model can be scaled up to your liking and scaled down to about 75% and still print fine and fit a standard electronic tea light. I also included…
I present to you the first in a series of Halloween pumpkins . It’s going to be scary, it’s going to be creepy. It’s going to be fun :) This one is hollow inside and has a removable top so you can place a light source inside. For the…
New remaster model for 2026! This Halloween Jack-o'-lantern boasts a refined topology, a removable top in the classic style, and an open bottom accommodating the use of a votive or tea light. Elevate your décor with this enhanced…
These layered fidgets are hard to put down:) I have included 4 files to choose from: (1) Small pumpkin layered fidget with cut-out facial features (supports needed) (2) Small pumpkin layered fidget no supports needed (facial features not…
Ein kleiner Kürbis zur Dekoration oder als kleines Geschenk, mit einem kleinen Loch im Stiel zum Aufhängen. Für den Druck benötigen Sie keinen Multi-Extruder, da Kürbis und Stiel separat gedruckt werden. Um den Stiel am Kürbis zu…
Pumpkin model as tealight holder Be carefull with ussing candles, for safe use led lights candles Printed with 0.6 nozzle Layer height: 0.25 3 bottom layers, 3 top layers
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
Spooky season is coming so I decided to make some Halloween Pumpkins. This is the fourth one I decided to put on printables, but there will be more in the near future. This pumpkin is designed to be used with leaf( for extra cuteness) but…
The Knitted Pumpkin is a charming decorative piece that brings the warmth of autumn indoors. Designed with a textured knit pattern, it combines the rustic feel of fall harvest with the cozy touch of handmade crafts. Perfect for seasonal…
Say hello to the articulated sitting pumpkin! Halloween is right around the corner, and there's no better way to celebrate it, than with this cute little fella. It prints in place, and no additional assembly is required. I've included two…
This lil' guy can be printed as separate pieces (support free) or as a single body. Paint in your slicer, or paint with acrylics! 👻🎃 Printed in Overture Matte PLA White, Orange, Black and Green Happy Printing & Stay Spooky! - Overture
This candy bowl comes in two sizes. The largest one is designed to print just within the size limit of a Prusa i3 MK3. Use super-glue to secure the stem in place. Grid supports are recommended. There have been some reports of tree…
If you want ALL the versions, you can go grab them all for FREE on our patreon page: https://www.patreon.com/SEREV3d We reworked the inside structure completely: ✅ The big lantern Prints in under 8 hours (compared to +11 hours of the 2024…
Halloween cookie cutters Please don't change the size in the slicer. If you change the size, they will not have a thin cutting edge (0.4mm). Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution: 0.2 Notes: Print…
As the leaves turn, this spook-tacular pumpkin model with its timeless face is your go-to for starting an autumn or Halloween adventure. Print Settings: 0.20mm Filament: Prusament PLA Printer: MINI Supports: Everywhere Infill: 20% Brim:…
Here are the files for Gourdo the Pumpkin. a cute little pumpkin for your Halloween decorations. you will need a little support for this pumpkin, but I painted supports on the teeth and eyes to avoid supporting the whole pumpkin. The…
Tall Pumpkin for halloween decoration. The model is 160 mm tall and 84mm wide. The body and stem are seperate bodies to make it easy to print in two colours, you can simply glue the stem into the pumpkin body. The inside of the model is…
Dimensions (LxWxH) Outermost diameter of the pumpkins is about 75 mm, and the tallest pumpkin is approx. 100 mm tall. (100% scale) Basic information Pumpkins are basically the synonym for Halloween, and the mysterious glow of…
Update 16. 10. 2023: This cat was the second model I have ever published and luckily was quite successful. So after two years, feedback from fellow 3D printing enthusiasts and some gained experience on my side, it was time to update and…
UPDATE: Added a clean body version so you can scale the pumpkin up with no big fuzzy skin effect! Get ready for the screaming pumpkin, who’s just as scared of Halloween as you are! This Halloween pumpkin will add the perfect touch to your…
Halloween is getting very close now! We decided to put out another awesome new release: Day of the Dead Halloween Pumpkin , lantern version. If you sign up on our Patreon for FREE you can enter our SEREV3d Halloween 3d print Contest , and…
🎃🧙 Pumpkin Witch Hat – A Spooky-Cute Halloween Must-Have! 🧙🎃 Looking for the perfect Halloween print to bring a little wicked charm to your home or desk? Look no further! The Pumpkin Witch Hat is a delightfully creepy yet stylish model…
If you’d like me to keep going and bring you even more adorable models, you can support me on Patreon: patreon.com/draftaxis 🌸 Here’s my brand new design — a mischievous flexi pumpkin 🎃 ✨ He’s cute, playful, and just a little bit naughty…
The original Halloween series designed by HardPrint co. is released! Original super cute design, without support and easy to print. This file is not for commercial use. If you need commercial use, please contact us for license.…
Here you have a little Halloween Pumpkin. With a led light it looks great. You also can store things like pens in it. The one on the pictures is printed with an 0.6mm nozzle and 0.28mm layerheight. The scale is 80%. Print it in 3 pieces.…
A Cute Little Pumpkin Spider For Halloween Decor
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
This haunting 2D pumpkin design perfectly embodies the eerie and festive atmosphere of Halloween. With its carved features and classic Jack-o'-lantern shape, this iconic symbol of Halloween brings a touch of spooky charm to any decor.…
🎃 Pumpkin Spiral Fidget Toy – Twist Fun for Halloween - now with Ghost! 👻🌀 Here comes something else for Halloween or Thanksgiving: a pumpkin with stem and leaves that comes with a special twist ! The upper part can be turned out,…
Click-it Fidgets are a perfect non-sugary treat to hand out for Halloween! 🎃 I've included a pumpkin base with and without the keychain hole too! This set of Click-its has six jack-o-lantern faces to choose from plus a blank pumpkin.…
Realistic pumpkin skull mask with scary details, perfect for Halloween or cosplay.
Ich habe für das Modell Glow-in-the-dark PLA Filament verwendet! Sieht nachts super aus! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa Slicer die maximale Druckgeschwindigkeit auf 80 mm/s eingestellt.
Found these on thangs and loved how they printed. Wanted to share them with the Printables community
[Updated 2024-10-29: Added new links to related models in notes.] Check out my Jack-o'-lantern OR Ghost tealight holder design that can be found here: Jack-o'-lantern Tealight/Figure - Halloween Pumpkin Decoration Ghost Tealight…
Meet the Ghost Pumpkin Clicker 🎃👻 – a cute Halloween-themed desk fidget featuring a happy little ghost popping out of a carved pumpkin. It’s small, fun to print, and gives a satisfying mechanical click every time you press it. 🖱✨ The…
Update 12/09/2023 Thanks to one of your feedback I've figured out that the file for the Stem wasn't laying right on the buildplate and had a wrong orientation. I've now uploaded the correct one, so you don't have to arrange it yourself…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) CUSHION PUMPKIN / MODERN…
Remixed ghost pumpkin from overture, adjusted for a tea light to create a spooky look, great for halloween decoration. White body part needs some supports in the middle Stem can be glued into the top If you want to support me or get…
Printing time is about 22 minutes with a layer of 0.2. This is enough to create the effect, but you can print smoother too - 0.1. On my photos and videos, printing was carried out with a thickness of 0.2. Any opaque plastic can be used…
The hidden latching mechanism will only unlock if you discover the twisting top section. Customization Choose between 2 base designs (smile or plain) Choose between 4 ring designs ("Happy Halloween", “Trick or Treat”, “Allergen Free” or…
Carved pumpkin bowl for Halloween
NOTE: THERE IS AN UPDATED VERSION OF THIS MODEL AVAILABLE HERE: https://www.printables.com/model/1027691-pumpkin-pie-fighter-2024-remaster-halloween-themed This Star Wars Halloween PIE Fighter prints without supports and assembles to…
🎃 Spooky, fun, and articulated! These mini Jack o' Lanterns are perfect for Halloween decorations and play. 👻 Printing Instructions Profile: Use your standard 0.2mm profile for printing. Seam: For the pumpkins, set the seam line position…
…Please be sure to hit like & post a make, I'd love to see your prints! (Also be sure to share the love with the original author!) Here's a little remix of this fantastic model to make it easier to print & assemble. Print as per the cut…
This .stl comes from a 3D scan of a pumpkin taken with an Artec Space Spyder 3D scanner with details on the order of 65um.
If you’re looking for another Halloween fidget - I got you covered with this Pixel Pumpkin 🎃 I have included two sizes of this fidget, small and large. Dimensions of Small Pixel Pumpkin: 2 in. x 2 in. x 1 ¾ in. Dimensions of large Pixel…
This is a Multimaterial Remix of Halloween Pumpkin Spider Transformer by Megawillbot ( https://www.thingiverse.com/thing:3129886 )
This is a remix by: Pumpkin I repaired and modified the model so that there was space inside to hide sweets or some kind of gift. And thanks to this adjustment, printing speeded up rapidly. If you want to reach the size as I have in the…
Spooky season is coming so I decided to make some Halloween Pumpkins. This is the second one I decided to put on printables, but there will be more in the near future. Hat is in two versions -without pin -with a pin for easier attachment.…
This 3D model features an adorable ghost, perfect for Halloween decoration. With a cute, kawaii design, this small ghost adds a friendly and not-so-scary touch to any Halloween setup. Easy to print and customize, this ghost is ideal for…
Just a fun creepy little Jack-O-Lantern for Halloween. There are 2 versions : solid and container and you can choose to print it with or without the tongue. MMU files are also included and ready to go. No Supports are needed! --- If you…
Use the “Whole Pumpkin” file for printing in one color and use the seperate files for printing each piece in a different color (the stem). Use glue to attach the stem if you're printing it separately.
Pumpky is here to light up your spooky season! With its round shape, carved smile, and playful charm, this pumpkin is the perfect Halloween desk buddy or keychain. A fast and support-free print that brings festive vibes in under half an…
Halloween Pumpkin - per KI erstellt und selbst nach bearbeitet damit es etwas material sparender ist und für LED Teelichter gebraucht werden kann. -Volle Version -ohne Boden Version -Dünne Version Wenn die Dünne Version gedruckt wird,…
The autumn season is slowly approaching, and of course, there will once again be seasonally themed models from Deltaprints this year. So, let’s get started with a charming little pumpkin tealight holder. This model is quick and easy to…
I used glow-in-the-dark PLA filament for the model! Looks great at night! Print: Nozzle 0.40 mm Layer height 0.2 mm Set the maximum print speed to 60 mm/s in the Prusa Slicer.
Pumpkin Spinner! Print in place, easy and quick to print. A cool seasonal fidget to enjoy during Halloween 🎃 Now with a keychain version included! I recommend it at 80% scale 😉 Tip: If you feel it too tight or too loose, or even if you…
A found and revised version on thingivers of pumpkin - Jack O'Lantern Ein gefunden und überarbeitete Version auf thingivers von Kürbis - Jack O’Lantern Update 13.10.2023: Lid for colour printers divided into two parts with threading Habe…
I modified the pumpkin to light, you can put more of them next to each other like a chain. There are 2 hats.Lantern1 fits perfectly on the headLantern2 is larger than in the photos and creates a cap
Halloween Pumpkin Ingrandito al 125%
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) ROPE PUMPKIN (MORE…
Enjoy printing :) Disclaimer: The individual who 3D prints this model is fully responsible for the choice of materials used. Ensure that appropriate heat-resistant materials are selected, and never leave the tealight unattended while…
Thank you for the comments and like my design. I have scale down the stem size a bit and split it form the base. now you can Print the base upside down and rotate 45 degree to have a better result. Print with PLA For 0.2mm QUALITY…
Comes in 2 Pieces. I used this earing set on Amazon to put it all together. I print them at 2.5 mm thick Happy Printing
Beware the living pumpkin! It walks on twisting green vines, snaring ill-fated trespassers! Its hideous face was carved by a mad farmer, whose evil soul animates its rotting orange flesh! It has space for a festive tea light! Happy…
Print Settings Rafts: Yes Supports: Yes Infill: 10 Notes: Print it like on the *.stl files position: rotated 90° in the
Bring Halloween to life with this 3D printed jack-o’-lantern pumpkin tealight holder ! Designed to fit standard LED tealight candles (safe, no flame), it glows through its sharp eyes and jagged mouth, making it the perfect decoration for…
A set of 3 Halloween bookmarks featuring a ghost, Frankenstein, and a pumpkin jack o lantern. They’re quick to print, thin enough to slip into any book, and perfect as little seasonal gifts or party favors. Print them in festive colors…
Halloween season is near so i decided to make this cute little cat inside a pumpkin! PRINTING SETTINGS -Printed with 0.16 mm layer height. -10 % infill Gyroid -No supports 💰Commercial Use💰 Want to sell prints of my models? Subscribe to my…
I print my pumpkins in white and then I paint them.
Pumpkin Emoji Decorations! I made these last year when I was learning how to use Blender. I decided to dig them out for this years Halloween for all of you makers to enjoy. They are based on my Emoji Ghost Decorations from last years…
This pumpkin model can be printed in place without supports and has a screw in the stalk to lock it closed. Try Remixing it by 'carving' a face for Halloween. I modelled both Pumpkins to have a 1mm wall thickness so they can print with 2…
Check out my other spiral design! https://www.printables.com/model/1073432-spiral-skull-decoration Get into the Halloween spirit with my latest 3D model, the "Spiral Pumpkin - Halloween Decoration." This model is designed to look like a…
A fully 3D printed catapult for chunkin mini pumpkins. Go for distance or accuracy! https://youtu.be/6TlCzzJzYZQ Printing All parts can be printed without supports Add brims if curling is an issue - especially on the base If parts are too…
Halloween Cookie Biscuit Gingerbread Cutter (approx 45-50 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
I've included two bowls for people with different sized printers. The larger one was printed on a Sunlu S8, but it will also fit on an Ender 3 sized printer. The smaller one was printed on a Prusa Mini+. You will need to print the ring…
No brim or supports required. The Twisty Pumpkin Fidget Toy is a fun Halloween-themed fidget made from 9 nested pumpkin segments that can move independently up and down. Push and pull the individual sections to transform the pumpkin from…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Simple Halloween Pumpkin with air vent on cap if someone wants to put fire lamps inside to avoid heat. On a cold Halloween night in 1963, six year old Michael Myers brutally murdered his 17-year-old sister, Judith. He was sentenced and…
Some spooky teeth for your pumpkin, print as many as you need at a scale that fits your pumpkin. Edit: added better grip to the teeth
My wife wanted to buy some of the new fabric/knitted/crochet pumpkins to decorate our house, because Fall… 10-15 bucks for a small little pumpkin? Hold my beer! I have designed several decorative pumpkins which will apparently be taking…
Remix of two amazing designs. Original files: Mini Vader by itech3dp: https://www.thingiverse.com/thing:2936081 Jack-O-Lantern by Makies : https://www.thingiverse.com/thing:167043 Print instructions Rafts: No Supports: Doesn't Matter…
New stl. files upload more straight kutting Print settings. LH: 0.2 Nz: 0.6/0.4 Sp: yes on build plate only NOT FOR USE WITH CANDLES ONLY WITH BATTERY LIGHT Pla used. Smartfil recycled from Smart Materials. Orange Purple
Created in Rhino3D, this pumpkin bowl was made to be printed in Vase Mode/Spiralized Outer Contour. I included 3 different gcode profiles of the three sizes seen in the picture: 125% 100% 75% I found that those sizes create a nice display…
UPDATE: added a body where the bottom hole is bigger.. just measured an electric candle and it's 38mm diameter and it would not fit A snowman made of three pumpkins. You can put a led candle light inside. Don't forget to support the…
3D model description: The pumpkin duck is an easy print. 3D printer file information: The glow in the dark one i printed with a 0.4mm nozzle and 0.2 layer height and the dual color was printed with a 0.6mm nozzle and a 0.24 layer height.…
This posable articulated pumpkin snowman makes for a festive fidget toy. https://youtu.be/h_6IVLau064 Printing All parts can be printed without supports. Several parts (particularly the chest) have very minimal contact with the build…
Happy Halloween ! Feel free to join my YouTube 'Channel if you want to see more of my cool projects or printer reviews https://bit.ly/2NonEXS Print Settings Rafts: Doesn't Matter Supports: Yes Category: Art
I made adjustments to my original design, changed the faces and made them more round and pumpkinshaped. It's now easier to print and there are no supports needed. I recommend using brim inside and outside with 5 line counts minimum. Cheap…
Container for storing sweets and more 🎃 The mark on the lid and stem will tell you how to position the stem correctly. Use glue for the stem. Don't forget to use supports for his mighty brow ridges and nose. Personal use only⚠ 👉 Check My…
These tealight holder are designed for LED tea lights. They can be printed in PLA and PET-G or other materials according to your preference. Update 2025-08-25: Added missed models with faces: 0A, 1A, 1B, 1C, 1E, 2B, 2C and 2E Now there…
Stretchy, Springy Pumpkin Toys STL files included for two pumpkins: (1) Big Pumpkin (2) Small Pumpkin 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great No Supports needed. 15-20% Infill Dimensions of Big Pumpkin: 3.25 in. x 3 in…
This is my first creation for Halloween, Just something simple to light up the dark. It is possible to print with minimum supports using supportblocker. 08.09.2022 - Pumpkinwithoutface.stl Added file without face if you want make your own…
Tips for printing: Supports: Yes (tree) Layer height: 0.16mm (optimal) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: Yes Colors and filament I used (3 Color Version): PLA / White - for the…
ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) SKELETON HEAD PUMPKIN A…
Simple pumpkins made for a contest Printable in Vase mode , high poly models You can use it for a plant, cookies / sweets, as a tealight ( ~66% size and LED candle recommended - as on orange background photos ) etc. 66% size was also…
