122 models
My Q30 headphones, like every over-ear headphone I've had before them, broke after a mere four months of use. Fortunately, the headband has a spring steel structural piece, so I could still use them, but the broken plastic threw off the…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Soundcore Life Q30\Q35 Part I reinforced it a bit in the most fragile place, as the original part I had broke during installation Category: Audio Video -
After 2 years of use these pieces broke in my headphones. I believe that is a common thing after some time. I created a 3d model to replace the original, and it works great! Probably better printed in PLA for rigidity and in PETG for…
Mount four 3.5 inch hdd on a 140 mm fan mount. The extra 8 holes are for stability and works on Coolermaster Q300L and Q500L cases. Ender 3 v2 0.6 nozzle PETG Category: Computer
Tibber offers an adapter for the electricity meter Easymeter Q3A for the Pulse. Unfortunately, this is currently not available. Therefore, I have designed this adapter for it. It is plugged whether on the electricity meter.
I did not have any 5mm length M3 screws, so I had to add a nut as a spacer to get the right depth. You will need some M3 5mm long screws, and some nuts to drop in when you set the pause in the layer height. Here is a video of the M3 nuts…
These are the clips that hold the side panels in on the NCASE M1 and Lian Li PC-Q33 (and maybe other) cases. I've tried in ABS and it works well, so far it's went through a lot of cycles of me taking the panels on and off. Not sure if PLA…
Inspired by the Leica T Snap Case and the Tekiac Stealth Cover for Leica Q (The store is sadly offline). I've made a version that fits the new Leica Q3. Features A grip Prevent lens from tipping down Access to battery Access to cable door…
This KeyChron replacement Knob is a perfect fit if printed on a well tuned machine. If your printer is a little sloppy you might need to scale it up slightly. I print these top down but you can certainly flip it and print with supports if…
Soundcore Q30 headphones sound good but has a poor build quality. The intend of this design is to reinforce broken headphones or protect them against damage. The protector clip may be made longer (or shorter).
This is a replacement part for the interior hood release handle bracket (VW part #1K1823633B), which connects the hood release handle and the bowden cable. If this part is broken, your hood release handle can't work properly, preventing…
This is a mesh derived from a scanned point cloud and not prepped for printing. This would be used to copy the important geometry (e.g. planes, ports and fastener locations) to create a new intake manifold or to fit-check a model before…
This spacer is designed for the Quest 3 VR headset. It fits snugly inside the lens area, similar to a standard prescript
here is a easy-to-print, easy-to-use Clip-On Lens Cap for the Leica Q (Type 116), Q2, Q3 cameras - not for the Leica Q3-43 can be printed in whatever material, color you want (this one in the picture being Prusa Galaxy black PLA). Excuse…
The original part required to remove the hooks in the headset cover, and drill it to use some screws to afix it. I added the holes in the part, so the cover with the hooks can be slide in it, and just use the original screw at the bottom.…
Have a nice day, everyone! I hope all of you enjoyed my replacement base part for Souncore Life Q30/Q35 When I screwed my original top enclouser, I made a mistake and after couple of months, I found cracks on it I fixed it with superglue,…
Thanks to Psych0o on Thingiverse for the design and including the STEP file. I've simply modified it to support M3. https://www.thingiverse.com/thing:4565701 Here is the original design that supports M5 25-30.
HDD bracket that adds an extra HDD (or SSD) mount to the bottom of a Cooler Master Q300L case. Can be used with 2.5" and 3.5" drives, so pretty much all of them since it used the mounting holes at the bottom of the drive. To mount the…
I wanted a mesh side panel for my PC but couldn't print it in one piece on my Ender 3. This limitation led to me splitting the design into several parts and incorporating the hexagon/cube pattern, which matches the magnetic dust covers of…
Copyright (C) 2019 Peter Senna Tschudin SPDX-License-Identifier: GPL-2.0-only This design is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A…
Snug fit. Better use PETG, because bearing may become hot, when alot of breaking.
Halterung für den ecotracker von everhome um diesen auf den Easymeter Q3A Zähler zu montieren. Das Oberteil, in dem der ecotracker sitzt, wurde um 8 Grad verdreht, da die Schraube für die Zählerbefestigung im Weg war. Keine Stützstruktur…
Have a nice day, everyone! Like many other guys, I suddenly found that my headphones were broken. But instead of buying another one, I decided to spend a couple of days creating the spare part. I reinforced it as much as I could and think…
This thing was made with Tinkercad.
Here's SR20DET to VQ35DE (350Z) Coil Pack Conversion Brackets – Nylon Carbon Fiber Easily upgrade your SR20DET ignition system with these custom 3D-printed brackets that allow you to run **VQ35DE (350Z)** coil packs. A lightweight,…
This is an adapter that allows you to mount optical probes (e.g., Tasmota or FRITZ!Smart Energy 250) onto an Easymeter electricity meter. It is compatible with meters of the Q1A and Q3A series and supports both the info interface and the…
This will fit perfectly in your case and will redirect the airflow of the front fans to your graphics card, it will make your pc look better and prints in two pieces without supports. You could print it in one part if your printer is big…
The Q300L has clip-on plastic bars in every corner that can be taken out and swapped around as neccessary for your case configuration. This thing replaces one of those bars with a custom one with mount holes. I've used it to add a…
3D-scanned my middle console to make cool mounts for smartphones and other things. Scanned with Creality Lizard
I created a small and simple desk stand for my Fiio Q3 DAC/Amp. I added a tougher version with thicker walls.
I printed it standing because the front is not flat. It fit good from far, not perfect from close. might update it if I look at it too much
EN VW Golf - Polo - Passat AUDI A3 - A4 - A6 - Q3 -Q5 - TT Windscreen mirror wire protection - cover - cap 3C8857593B The provided .Step file allow you to modify the length of your cover to perfect fit to your car, as your broken part is.…
iPhone 12 / 13 / 14 / 15 / 16 Pro Audi TT Mk2 (2006-2014), Audi Q3 8U, CD Concert Support Changelog: V2 - Added power button and volume button, respect the orientation of the phone, and extended compatibility to Audi Q3 8U (2010-2018)
Holder for Leica Q3 for Gridfinity system. Space for 1 extra battery and 3 SD cards. EDIT: Added lid to keep dust away. (Separate print)
Very rough draft, using just the simple tools in Tinkercad, therefore so ugly:) but working. This is a minimalist Quest 3 controller adapter to play Eleven VR Table Tennis simulator. Key design aspects: Ergonomic finger placement…
OEM parts made with EPDM Printed in TPU with 40D hardness Insert 100% infill, end up much harder than original EPDM (Not yet tested outer part, but i suggest non 100% infill) Support needed Should fit into: Audi A3 Mk1 (8L) Audi TT Mk1…
This is an adapter for the EasyMeter Q3 series power meter. It is to adapt DIY-style IR-readers. In my case the "ESP Lesekopf". Print this, so the depression for the washer faces up. Then no supports are needed. After printing insert a…
My PC crashed all the time because my RX590 got too warm. When playing games, the PC ran in something of 82°c. After realizing that the airflow could possibly be the reason for this, I thought that the fan could provide more air using…
A 3d printed mount for the popular Haltech IQ3 Racetek
Gear for Siemens EQ3 Coffee Maker. This Gear most commonly breaks for the brewing unit of the Siemens EQ3. Just a quick model, dont expect it to work but please tell me otherwise :) Print Settings Printer: Renkforce RF 100 XL Rafts:…
Adapting SEBEN EQ3 telescope mount or similar types to OnStep goto controller , by Howard Dutton project. How to this working? See my video: https://youtu.be/mOXqw7EN8YE My OnStep Controller Box on base STM32 Blue Pill Alternative OnStep…
A quick design for some PC case feet. Might be helpful on a carpet floor also
I made a wireless charging base for the Leica Q3 using Apple MagSafe charger I had extra of. The Q3 does not have MagSafe but this base make it easy to place on the charger and align the coils to charge.
The drive screws in from the back, then using some cardboard or other spacers the whole assembly can be screwed in one of the corners around the back of the case. Onshape Link:…
This is a case for LoRaSmartMeter, my SML electricity meter LoRa Adapter. Its designed to fit on a EasyMeter Q3A or eBZ DD2. All other information you could find in my GitHub Repo foorschtbar/LoRaSmartMeter . Additional Parts 1x Micro USB…
This hook is tailored to the geometry of this particular set of headphones, matching the cushion curve and width. Models should be printed in their current, sideways, orientation for strength. Two versions are included to allow the hook…
Very simple slide-in under-desk holder for Fiio Q3 DACs I didn't like always having my Q3 freely hanging around on my desk, so I made this holder for it. You need 4 small (I used 2.5mm) wood screws to attach it to your desk, and the Q3…
Original version: https://www.thingiverse.com/thing:5232416 Adapted to fit Q3 RTK HYX Composite Ringkolbenzähler from the company Pipersberg used by the water provider MAINOVA in Germany. Be aware that the ring holding the lid ist…
Legs for the Cooler Master MasterBox Q300L case. If your case is permanent full of dust because it have to stand on the floor you can use this legs. You need 2 pcs, 8x M4 threaded inserts and 8x M4x8 Screws (optional with washer). Just…
A custom 3D model designed to fully replace the original stand of the AOC Q3279VWFD8 and AOC Q3279VWF.
Kleiderhaken für die Kopfstützen eines Audi Q3. Durch die Löcher kann einfach eine Kabelbinder gezogen werden, so kann der Haken nicht herunter fallen. Coat hooks for the headrests of an Audi Q3. A cable tie can easily be pulled through…
Audi Q3 DPA 99551799802 Abdeckung, Scheinwerfer für AUDI Q3 (8UB, 8UG) - OEN 8U0955275E
Have a nice day, everyone! I hope all of you enjoyed my replacement base part for Souncore Life Q30/Q35 After more than 3 years of using, I found that top of the arm started to crack So, time to new robust design! Did want to create whole…
Wall mount bracket for Dell XPS 12 9Q33 2-in-1 convertible Touchscreen Laptop in tablet mode. I had an old laptop with no battery laying around and wanted to convert it to a wall mounted touchscreen, so I designed this. Corners are…
For reading out the Easymeter Q3DA Smartmeter you need to fit an IR Receive LED on top of the smartmeter at the right position. This case uses the positioning elements of the Smartmeter to get in place. It has a correct mount for the 3mm…
Just quick remix to add interesting new handle.
Modifications: Added spaces for 6x3 Round Magnets and some holes for cable passthrough Magnetic PSU Cover for Cooler Master Q300L/Q300LV2 with holes for cable passthrough Needs 12 6x3 Round Magnets and possibly some glue
Ich habe hier die Drehregler von meinem Weber Q 3200 nachempfunden. Die Originalen haben leider wiederholt ihre Beschriftung verloren. Das passiert jetzt nicht mehr. Gedruckt auf einen A1 mit PETG und dem Strenght Profil bei 0.2mm…
Print and pop it on top of the existing knob. Available in a filled and hollow variant. If you want to tweak anything, such as the diameter or height, the Fusion 360 file is included, with parameters for every value.
These fittings will fit all original Zehnder Q350 ductworks. Ranging DN160-DN100. Includes fitting from DN160 elbow to silencer.
Taller foot for the Q300L. Let's the PSU breathe a little better. It'll clip into place where the original feet go. You can screw in a 4m machine screw into the center clip for extra holding pressure.
Cup Holder Top case with MagSafe Charger for Audi Q3 F3 (2019-2025) It's suitabile with MagSafe Charger with 5.5mm of thikness and max 60mm for diameter. It's perfect for a lot of Magsafe with low profile. It have a double hole for cable…
This design adds larger buttons to Anker Q30 headphones (transferring presses to the Q30's buttons beneath). The standard ones can be hard to find quickly, especially if wearing gloves. The new buttons can be pressed either axially or…
replacement front and top panels for coolermaster q300l pc case (requires cutting out most of the factory panels). They provide much better thermals than the factory panels. did not provide mounting holes as i wasn't sure of the hole…
After making my MagSafe charger for the center console of my Audi Q3. I needed to find a place to put the original Audi cup I use as a storage solution. It fits well in the driver's door, but it was too loose, so I decided to create a…
I created this mount to attach a Celestron R/A Motor Drive to my Explore Scientific Firstlight Exos Nano EQ3. A small screw is required to secure the motor to the mount.
JJRC Q35/Q36 I made this gear that's press fitted on the motor shaft. I just drilled the hole with a 2mm drill. Works great. Printed in PLA and with 100% infill
Hi, just a simple holder for my Phomemo label tool, to add this to my IKEA Skadis walls. Link to Label tool: Phomemo Beschriftungsgerät mit 3 Etikettenrollen, Q30S Etikettiergerät Selbstklebend Etikettendrucker Bluetooth für iOS &…
This is a knob for the keychron Q series with a cat on it.
Es un único archivo que vale para los dos lados
A simple holder for earbuds. Category: Computer
This simple adapter allows you to plug stock finderscope of Skywatcher 150p into the polar finder slot of its EQ3-2 mount. While it's far from optimal and not extremely accurate, it's good enough. You can get pretty good aligment by…
this is a remix to my Leica Q (Type 116), Q2, Q3 Clip-On Lens Cap in Karls Erlebnis-Dorf appearance. outer contour of the lens cap itself is same to the original model - the strawberry inlay is meant to be printed as one piece while…
I keep my tower under my desk where the top corner is the closest to me and i wanted to add usb-c to the front io. Combined with this , I utilize an existing hole in the metal of the tower directly behind the original cooler master logo.…
This mount can be used to attach an ESP32 with an photo resistor to the powermeter Easymeter Q3M. I glued in two 10x2.5mm magnets to attach the mount to the powermeter which already features a metal ring around the IR diode. I provide all…
U can use this as template paper to cut rubber for wasyl00's adapter.
This is a headphone stand, with a slot at the base for a Fiio Q3 DAC. Size is 120x120x236, so it will fit many printers, and support many headphones. I know there are nicer designs out there, BUT this is: functionally satisfies my needs…
The EQ3 Stem Lamp (SKU 3180-277-4) has plastic parts that hold the sections of pipe together. They also house the electrical connectors. They break very easily. So this is to replace it. The .stl files are the ones that worked for me in…
It's located in the arm mechanism, the exact location is in the service manual. I was forced to replace it because the small plastic pin that holds the spring broke and even after gluing it it could no longer resist the tension of the…
I recently bought a Motorola MA1 wireless Android Auto adapter for my car. However, in my Audi Q3 F3 , the USB ports are located in a visible spot on the center console, which I found inconvenient. To solve this, I decided to install an…
These two mounts allow you to attach Behringer EUROPOWER EPQ304 Amplifiers to be attached securely to 8020 extrusion popular with sim racers. I used them to secure the amplifier to my rig for the bass shakers. You can read more about my…
52-tooth, module 0,75. Outer diameter: 40,5mm Root diameter: 37,1mm Pitch diameter 39mm Designed to fit a 20-tooth motor gear with a pitch diamter of 15mm Set to 0,25 RPM for consistent tracking. Follow the Daily Space Facts channel on…
This is a battery bracket upgrade I did for my Turnigy TZ4 1/28 Scale RC Car. I replaced the stock 400mah battery with a 800mah battery and it was putting too much stress on the elastic band that held it in place, it was not very…
Cooler Master Q300 compatible pump cover. compatible with the Cooler Master Q300 theme.
replacement Audi glovebox latch for Audi q3 2016-2018 8U Print with ABS or ASA Infill: 100% Supports: yes Please reorient the part for less support material and sleeker finish
Sometimes I have to carry my Gimble in my backpack and because y ride a motorcycle, the road can get really bumpy, so I need to protect everything in the backpack
I have a surround sound center speaker on a shelf above the screen. I want the speaker to angle towards the listener and created this model. This model took over 6 hours to print with settings including: Overland PETG 0.20mm Quality 15%…
A non-firing, glue-together desk sculpture of the DL Q33 from Call of Duty: Mobile, designed for FDM printing with no supports. Assembled on its stand it measures 435 x 84 x 105 mm. The largest part is 178 mm long and the tallest print is…
Rear Optic Cover for the Panasonic RQ35k Optics Guarantee fitting for: ET-D3LEW10 ET-D3LES20 ET-D3LET40 ET-D3LET30 Printed in Pla and has a good fitment (Press Fit)
If a part of your Bosch MFQ36490 hand mixer blender has broken, this may come in handy. In my case, the coupling (connector) of the immersion blender attachment broke and no longer stayed secured in the mixer. To replace this part, follow…
Butterfly iQ3 ultrasound probe for use in simulation-based training
I love my XPS 12, but it's not aging very well. Dell unfortunately use a soft touch coating that disintegrate with time and make the laptop all stick. Especially the rubber pads on which the screen rest when the laptop is close. As the…
Use 3mm screws to mount it I guess.
Accessory panel for the MasterBox Q300L, with optional text and hole for... sticking things through the hole. May not fit at first print - your slicer may be sabotaging you! I don't know why this happens. Try scaling it down 2mm or so.
This model gives you somewhere to hang your batteries and controller for the Sky Watcher EQ3-2 dual axis motor drive. It hangs on the leg of the standard square section aluminium tripod, which comes with the mount. Easy access to the…
I made this model to secure a second-hand ETX-60 to the EQ-3 I use with my 90mm refractor. Since Meade no longer exists, this is perhaps the only way to add a tripod to a lonely ETX. I based this design off online images of the original…
20 M3 heat inserts with H=4mm and some small screws are needed - The ones that came with the original rack case does fit. The bottom and the right side have cutouts for SATA or other cables. I highly recommend printing the top with the…
Did my best to fix the geometry to avoid thin areas and smooth the surface.
I don't know if these are compatible with the Q30s. I recommend using supports for the screw holes.
