299 models
Print with low layerhight e.g. 0.15/ 0.1mm for the thread to work best. When the print is finished, assemble and carefully repeatly move the threads several times to get them to work. The hight inside with the lid on is about 75mm.
This model uses the recess on either end of the cooler to attach wheels. This model is split into two pieces to allow printing on a MK4. The wheel attachment is held on with a ratchet strap that is threaded though the slots on either end…
Print approx. €58.98–€72.08 excl. taxPreliminary estimate for one variant
Use a screwdriver or something to bend the plastic of the box a bit so you can push the nonflat side nub of the model into the hole. Print it semi flat, as shown in the code file.
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
In the "Multiled QT" model from the manufacturer GS Vitec, two 24V fans are connected in series. After these broke down, I have constructed a cover for a single 48V fan here. So this is a replacement part, or an improvement on the…
This is a 3D print to accommodate a breadboard to help program an Adafruit QT Py RP2040. I placed the controller 7 PINS from the right of the side of the breadboard. The large labels helps to identify which PINs are what. In the STLs,…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
This replacement indicator for the ZN50QT-A type scooter from Minreva (normally also fits Lexmoto Tommy 50 and Znen/Zhongneng models) was impossible to find/source anywhere while I was repairing one. After 20+ hours of measuring,…
Although not as fancy as other planes, this QB based trainer is going to be a workhorse of your daily flying. Transferring from foamies get used to a different behavior of scale weighted and rigid planes with this durable, easily…
This Case can hold up to 12 QTips. It allows you to take them with you, while being protected and kept clean.
Qtip lengths aren't standardized, so it may not fit some types!
i made this version to take less time to print. so i shortened it and slotted the bottom out. use supports as in my picture. added a step file. added a closer fitting lid with gripping area. added a bottom file. the added lid and bottom…
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
This is designed for Q-tips but could dispense other roughly cylindrical things of similar size. This is a hex peg attachment to the wall, that goes into an empty socket. The larger hex on the back is a spacer to allow room for the lid to…
Printed in petg - 0.08 layer height Uses 2 m2 bolts No support
Just a little storage box for qtips, please share your creations , I would love to see the results ! UPDATE: Made a stronger version, for safer prints.
This publication isn't entirely finished or organized yet as I'm currently busy with some other stuff. A better assembly/troubleshooting guide will be uploaded in the future! THE STORY: I designed this model for an exhibit at Open Sauce…
Qtip Dispenser in two different Versions of the Box. Printable without further support, the necessary support is included in the model
This two-piece stand design is custom made for the Yamaha SEQtrak and Arturia Minilab 3 , so that the SEQtrak is firmly held at a comfortable angle and slightly above the Minilab. I just added a version that works for the Minilab 2 (mk…
A 3qt scoop with ergonomic handle perfect for feeding chickens. Print size 110-115% with PLA or PCTG. For best strength print at .28 layers, 5 perimeters, 4 bottoms and 20-30% infill for the handle. Due to size it will take about 10-11…
I saw the Arduino QT PY while ordering online and thought it would be perfect for a single key keyboard, being only slightly larger than a MX switch. This is made with just a QT PY, two wires, a 1kohm resistor and a Cherry MX Blue switch.…
I printed it in a Creality Ender 3 V2 0.4 mm nozzle, 0.2 layer hight, 20% infill, 210C and 60C Also used a brim to get a better adhesion. And for the seam alignment I used the option “random”. Took me 6h to print at 60mm/s and turned out…
First of all thank you for the smooth design of the original model qtip dispenser rnd . I wanted to use this model because: It covers the cotton parts of the q-tips (ear swabs), they stay cleaner in than other open models. You can grab a…
Just a little QTip Holder with a lid, should be printed in “vase”-mode. My wife wanted such a thing, and because I couldn't find the right one I created one. The lid should be a bit loose for easy opening and closing. Edit 2023-01-01: I…
The original model was the right width and depth I needed since my Bambu doesn't have that much room behind it from the wall. This remix model gives it a bit more height and uses pressed in magnets. no glue on the magnets. just some elbow…
Nice little Bow and Arrow game! With additional ‘Fingerquiver’! Easy to print (bow in 10 min, targets in 15 min) and easy to use. Arrows can be made out of QTips (cut off one part of the swaps) and targets that can be printed. Arrows can…
Simple 1x1 Gridfinity Bin you could use for Q-tips or anything else….
3D print yourself a snap fit case to house a QT Py and a STEMMA QT breakout board. The bottom cover has built-in holder for the QT Py that can be secured without any screws! YouTube Video https://youtu.be/NaFqSdJdPmQ Wipper Snapper Quick…
Decorative holder for cotton pads (60mm diameter) and buds. Inspired by ancient roman columns, with a 'broken' top for the ruined look.
Compared to my first attempt, this is a much more user friendly filament dry box system using the Sterilite 20qt storage boxes. No more removing all the spools just to change out one. All parts print without supports in the orientation…
Drops into a Sterilite 6qt bin to divide the bottom in half if you need more granular storage. I printed with no top or bottom layers to get only infill which dramatically reduced the print time. Three versions available: sized to slice…
A simple fix for a great lunchbox The Igloo Little Playmate 7 quart lunchbox is super handy, but the latch can break. While I was able to glue mine together, I designed this robust replacement that permanently solves the issue. Even if…
this has rounded ramp for cotton swabs, needs supports. Category: Containers
Simple direct replacement handle for these storage bins, printed in PLA. Print orientation on flat bottom with tree supports.
This print houses a single Adafruit QT PY board with USBC connector. The top snaps shut and has two button cutouts to allow you to press the reset / PIN9 button. It has a small slit in the back for cables - I use it to wire in external…
This baseplate brings the Sterilite 6qt 1642 container into the Gridfinity ecosystem, allowing a 3x6x15 volume of use. Need something bigger? Check out my 16qt 1644 version for a bigger version. As pictured, if using standard bins, a…
Qtip holder for Ikea Skådis. This is a remix from https://www.thingiverse.com/thing:398515 And uses the hooks from: https://www.thingiverse.com/thing:2751867 Remixed with 3dBuilder Print Settings Printer Brand: Creality Printer: Ender 3…
pull up top knob to bring up qtips to take them out. i included a step file o make it easy to modify. no supports
Enclosure for LILYGO T-QT / T-QT Pro (ESP32-S3 DEV Board)
Qtip and makeup pad holder.
A simple cover for the Adafruit Trinkey QT2040. For making a DIY USB Nova: usbnova.com But I also included a version of the case without the NOVA text printed on it, so you can use it for any project. You also need 4x M2.5 4mm screws to…
You'll need to print 2. Mount them fairly wide is best, see photos. Be aware of where the front and back buttons are when sliding them on/off. Make sure you position them far enough away to still allow easy usage of the buttons. No…
Ripped the QT-RTG from the game files, and split to make it printable Print it with Supports Everywhere , and at .1mm layer height.
qtip holder round lift up to refill Category: Containers
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
This is a mockup model of the QTR-8RC and QTR-8A line sensors from Pololu. I made it to help me designing my new line follower and hope can be useful for someone else. Dimensions used were found on the Internet because I don't have the…
Desiccant holder for Sterilite 20 Qt container. Fits along the side not taking up filament storage space. You should be able to find the Sterilite bins at Walmart, Target, Home depot or Amazon. There is an additional file for a funnel to…
This is a replacement buckle for the IrisUSA 12.9 QT storage bins commonly sold at Costco. These buckles seem to disappear on their own (especially with children) leaving the lids without a means to latch. Included are two versions: One…
Divider for the 6.5qt mini tote from HDX
Two 1x2x12 containers to store cotton swabs on a gridfinity base with lid. I designed : One horizontal holder One vertical with a divider to minimize scramble One lid with hole One lid with handle I only printed and tried the horizontal…
Rail for sterilite 6 quart containers. 8 inches in length so it can print on most printers. Mount it to the top of a shelf or something to allow the containers to take up vertical space! Ideally print vertically. Unfortunately it makes…
As many other owners of these coolers have experienced, my latch broke internally. Igloo does not sell replacement parts unfortuneatly. I printed a few others I found online but found out they were for the smaller models. I used: 100%…
Here is my RPi server rack with USB-C Sitepanel and slide compartment . I created this one for easy and nice looking storaging your RPi. You can easily replace you Pi's by pulling out the compartment and just put your Pi on the pins.
The prongs on the original model were a touch too short for my bin, leading to the latch falling off. This remix extends the prongs to 7.54 mm, measured from bottom of prong fixture to top of prong. See images for how I measured the…
I wanted to have my re-usable desiccant, for storage, to be out of the way and easy to manage with my storage containers. So I created this, to be printed in groups of 4, to line the bottom of my 44qt storage containers Feel free to…
Included is a 2, 4, and 8 paddle option. The primary purpose for this beater is to beat heavy cream for making whipped cream or butter out of. Suggested print settings: Infill: 20%+ supports: yes bed adhesion: at least 10mm brim with…
Did this for the valentines day contest, hope you like it :)
This is a replacement latch/handle for Iris brand 13 quart plastic storage bins. The bins are great, but the included latches often snap off, so I designed a replacement which is a bit thicker, and optionally uses M3x8 socket head cap…
I search and could not find a replacement cap for my FloTool 58qt Oil drain pan (42008). I made this real fast The cap is design to print fast without supports. I used pla however petg would be better. the gasket is printed using TPU. I…
Added a snap to the Compact Qtip Dispenser so it can be mounted on multiboard. Printet upright with supports.
Handles for protecting front and back of the radio while also raising it over surface. Printed from PETG. Create opposite piece by mirroring object in slicer software. Glued 4x round rubber feet (up to 8mm diameter).
This is made to hold larger reusable cotton rounds, and cotton swabs, or makeup brushes. Also, hold a smaller cup for mouthwash or painting. There are 10 designs. The first number of the file name is how many cotton round wells there are.…
This is a motion detection and multisensor device I've created. Built with an ESP8266, DHT22, Lightresristor and a PIR Module. It use MQTT to transmit the values. To assemble the motion Sensor you need the 3d parts and the PCB board. The…
This stand holds an iPhone 15 Pro (or similar) above the Yamaha SEQtrak for convenient ergonomic placement when using the SEQtrak app. If you end up using this, I'd appreciate a like and comment! This also works with my previous Arturia…
There are two of my earliest models, and my first practical ones. The bathroom cup holder is designed to fit 3oz bathroom cups (Dixie cups). There are versions of the Qtip holder - one with the cover printing in one piece, which will…
updated description 12/15/2025 - This is a 3D-printable splash guard designed to fit KitchenAid 6-quart bowl-lift mixers . It helps prevent ingredients like flour, sugar, and liquids from splashing out of the bowl during mixing, keeping…
Small parts storage stays that can fit two-dep in an Altoids tin. I made several varieties that should hopefully suit a range of purposes. Just pick and print whatever two you'd like and stack 'em in the tin. There's a grip area in the…
I printed this on its side, scaled up from the orginal 15% in the X and Y axes. It fits my cable fine, but if you move your mixer around a lot, you may want to scale it down 1-2% for a tighter fit.
I got a bunch of these 6.5qt hdx bins on sale a while back and found myself throwing all sorts of things in them. That was great to get everything off my desk and seem a little more organized, but then it was more of a pain to find the…
LICENSE Copyright © Herr Brain 2023. This source describes Open Hardware and is licensed under the CERN-OHL-P v2 . You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-P v2…
This is a remix of the Filament Spool Rack for 20qt Sterilite Container by leefla - Thingiverse which tweaked a couple of elements/dimensions from the original design. These rack ends are designed to work with 3/8" (9.5mm) diameter…
QT Py snap fit board holder component. Needs to be combined with an existing or new bottom surface in a 3d modeling program to be usable. To use in Fusion 360: Upload the .f3d file to your project. Add it as a component by dragging it…
The is a rugged box case for the Yamaha SEQTRAK. The little groove box has a very long shape so I had to do a lot of work and prototypes to finally settle on a strong seam that is sealed so you can get this folding case design. The…
Build a DIY footswitch USB controller using CircuitPython and QT Py RP2040. This uses a micro switch, micro-controller and 3D printed snap fit parts. This footswitch can be programmed with CircuitPython to make custom keyboard shortcuts,…
Keep your Qtips handy while travelling. Much neater than throwing them in a zip lock bag.
I printed in PETG .2 layer height and it has held up over a year so far. TPU may be another good candidate. Simply knock the hinge rod through the old hinge with a small punch, and knock the rod back through the newly printed part. Make…
I really liked this design so I moved a few things around for a snug fit with the watertight Sterilite 20 quart tubs. 5 spools fit tight. I did not use any spacers but might have to revisit that idea after I add passthroughs. I cut the 1"…
Redesigned @leefla's model https://www.thingiverse.com/thing:3069436 to be a little bit taller as the filament rolls were touching the desiccant in the container with the amount I had in them. I also made the holes slightly bigger so the…
UPDATE: based on the comments I have adjusted parts dimensions to have the proper components fitting. Let me give credits for inspiration to Necko who designed holders and wheels for 608Z bearings:…
This is a remix of DT Instant Pot Duo Dragon Vent for a 8qt unit https://www.prusaprinters.org/prints/12853-instant-pot
The original latches began to break one after another. Made them as close as possible to the original. I traced around the original latches and took measurements as best I could. I did this off of fusion 360 on my Prusa original mini.…
The is a slip on rugged case for the Yamaha SEQTRAK. The little groove box has a very long shape so you cannot use a normal folding case design. It's so light and seemingly fragile that I felt it needed something rugged to protect it. It…
Wanted a little rack case for a little rack. Also, tons of my pi projects would benefit from this simple formfactor. It's a half-rack 1u, so 10" wide. Rack parts can be bought from Amazon. This unit fits NVME storage but only if it's…
Just added a cotton swab pic. Printed on Bambu X1C. Bambu PLA - Galaxy Nebula.
The Sterlite 20qt gasket box is the best bang for the buck for filament dry storage. I wanted to be able to see when the humidity was getting high and the desiccant needed recharging, so I bought a 12-pack of these humidistats and…
Filament Spool Holder Sterilite 20Qt - 3/4 inch PVC Minimalist remix of Stronger Filament Spool Holder for Sterilite 20Qt Box to allow use of ¾ inch PVC and printing on the A1 Mini or similar printers as the original design is too long.…
I had printed a Super Scooper² to manage my Dry & Dry desiccant beads when transferring them back from the baking sheet in to their assorted vessels, but wanted a funnel to make the process easier while putting surplus back in the…
I simple holder with lid for cotton swabs. It is the perfect size to accommodate the 375 count box of Q-tips! The model in the picture was made with the fuzzy skin option!! The g-code does not!
Replaces the cheap paper box that comes with these small travel containers for qtips/cotton swabs.
Compact snap together case for an Adafruit QT PY board and Stemma QT sensor. Supports recommended. Three piece design includes base that holds QT PY board face down with two holes for access to boot and reset buttons, divider with…
This is a compact and functional tray designed to securely hold Adafruit QT PY and/or Seeed Studio XIAO microcontrollers. Perfect for organizing your desk or project space, the tray includes individual compartments sized specifically for…
For the 80 Qt version of the Sterlite gasket box, the latches are slightly shorter. For the latch to fit I ended up having to shorten the height by 3mm. When I printed, I used my Bambu X1C with Bambu PETG-CF. Here are my other settings…
Digital filament scale with RFID and MQTT (translated from german) This filament scale recognizes the filament spool placed on it by the attached RFID tag. This tag contains information about the spool number and its empty weight. If a…
There is an improved remix here . This is a remix of nikutama05's (on thingiverse) filament storage box that holds 4 spools of filament with these changes: Designed for US-based 5/16 threaded rods. You need 2 of these that are each 12…
A small holder for cotton pads and qtips, with hooks on the side so you can rest the qtip during use.
A simple box with cut outs for wires to pass through, with optional solid lid.
I've had an Ozark Trail 52 qt Cooler for quite a while. It has lost one of its feet, so I modeled one of the remaining feet and printed replacements. I print this in PETG at .2mm layer height with only painted on supports under the hole…
Might work. Might not. Supports male headers soldered to the bottom side of the board. Comment your results. Use M2 screws. Holes are made to be 1.85mm.
Spool Rack for a IP68 rated Sterilite 19 Qt (18L) gasket box. Compared to the 20Qt (19L) box, the 19Qt has is slightly smaller yet still accomodates four 1 Kg standard spools. The rack is positioned so the 200mm spools just fit under the…
A minimalist Snapmaker U1 Bin Adapter for Sterlite 58QT (2248LAB80F). I believe the bin was $7 or so at Walmart. Uses the existing rubber grommets that came with the U1, and friction fits into the unit. The STL uploaded here has all four…
If you use those Sterlite 32 quart / 32-liter airtight totes, you know the handles readily break off. The little nub breaks. This solves that problem. Use a 13/64 drill and be sure to drill the hole centered of the broken one.
![[v2.2] QtQwiicCliq - DIN mount for Stemma Qt/Qwiic/Thing Plus/Feather/Raspberry Pi Zero](https://media.printables.com/media/prints/512753/images/4155220_203b39bf-2534-4a34-bd72-fcf5323b0e6e/pxl_20230625_030245459.jpg)
